On some systems `python` is `python3` (for instance, Archlinux). The
`PYTHON` variable can be used to point to `python2` to have a successful
build.

The use of `PYTHON` is currently limited in the Makefile and needs to be
extended in other places:

First, pylibfdt is required to be a Python 2 binding (binman imports
pylibfdt and is only compatible Python 2), so its setup.py needs to be
called accordingly. An alternative would be to change the libfdt
setup.py shebang to python2, but the binding is actually portable. Also,
it would break on system where there is no such thing as `python2`.

Secondly, the libfdt import checks need to be done against Python 2 as
well since the Python 2 compiled modules (in this case _libdft.so) can
not be imported from Python 3.

Note on the libfdt imports: "@if ! PYTHONPATH=tools $(PYTHON) -c 'import
libfdt'; then..." is probably simpler than the currently sub-optimal
pipe.
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>

Do not dereference bmp before the check if it is NULL.

The problem was indicated by cppcheck.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

EFI Fixes for 2017.09:
  - Fix GOP w/o display
  - Fix LocateHandle
  - Fix exit return value truncation
  - Fix missing EFIAPI in efi_locate_handle (for x86)

Fix the IOMUX setting for SDcard CMD pin at the same time.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

The dts from kernel is using rk3228-pinctrl as compatible name,
need to sync with it to make the driver work.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

The description for eMMC/SDIO/SDMMC src is not correct,
update the CRU_CLKSEL11_CON value definition according to TRM.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

The DRAM start address is not 0, so need to update the last bank size
as:
DRAM start addr + DRAM_SIZE - last bank start addr

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

fdtdec.h is included, but not used in rk3399-board-spl.c: remove the
'#include'-statement.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

There are two same gmac node, remove one.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

UEFI API functions have different return types.
Some return a value of type EFI_STATUS other don't.

We therefore should not cast the return value of EFI_EXIT
to another type than the expression passed to EFI_EXIT.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

This changes pci_mmc driver to use PCI_CLASS_SYSTEM_SDHCI instead of
individual vendor id & device id pair to support generic PCI SD host
controller.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Sysam stmark2 board is a generic and fully (hw and sw) open board, with
a mcf54415 Coldfire CPU, 128MB of DDR2, 16MB of SPI flash and SD card
as non volatile memories, and a wifi module included on-board.
The board is actually used mainly for Coldfire custodian testing activity
related to the mcf5441x Coldfire family.

For further information please see: http://sysam.it/cff_stmark2.html



Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---

Changes in v2:
 - remove CMD_REGINFO
 - add board information in commit message

On some boards, CONFIG_SYS_CS0_BASE can be undefined, since
CS0 is not connected to any signal.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>

- fix cache.c CONFIG_CF_V4e to CONFIG_CF_V4E
- fix cache.c to properly enable/disable cache for V4E

Signed-off-by: Angelo Dureghello <angelo@sysam.it>

For certain boot types and sbf, for V4 cpu's, an early ddr/sdram init
is required. This patch moves this ddr/sdram early initalization
away from start.S (to be board related).

Signed-off-by: Angelo Dureghello <angelo@sysam.it>

During the the conversion to $(SPL_TPL_), the SPL_ fragment was
left over for the NOR, XIP and YMODEM boot methods in SPL, making
these unselectable.

This commit fixes this by dropping the spurious 'SPL_' fragment
from each line.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reported-by: Bo Shen <voice.shen@gmail.com>
Fixes: f94e643e (spl: consistently use $(SPL_TPL_) to select features for SPL and TPL builds)

Update the tx_delay and rx_delay to match the timing for
rk3399-firefly board to improve the stability of gmac data
transfer.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

This patch allows to show the EXT_CSD[179] partition_config
register info, just by specifying the dev param:

  U-Boot> mmc partconf 0
  EXT_CSD[179], PARTITION_CONFIG:
  BOOT_ACK: 0x0
  BOOT_PARTITION_ENABLE: 0x0
  PARTITION_ACCESS: 0x0

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

All boards which use DM_MMC have now been converted to use DM_MMC_OPS.
Drop the option and good riddance.

Signed-off-by: Simon Glass <sjg@chromium.org>

This should depend on SPL_DM_MMC, not SPL_DM. For it and update the only
affected board's defconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>

Now that the driver supports it, move these boards over to use driver
model fully for MMC.

Signed-off-by: Simon Glass <sjg@chromium.org>

Enable driver model for MMC (including BLK), SATA and USB. Note that USB
does not yet work correctly since the nodes are disabled. Hopefully this
can be resolved by the maintainer.

Signed-off-by: Simon Glass <sjg@chromium.org>

When CONFIG_BLK is enabled our weak board_mmc_init() will not be called.
Since there is no clock driver for MX6 yet, we must manually enable the
clocks.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add this file so we can use device-tree control for cm_fx6. It comes from
linux 4.12.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add support for using driver model for SATA with the cm_fx6 board. The old
code remains for now to permit testing.

Signed-off-by: Simon Glass <sjg@chromium.org>

This driver does not currently support CONFIG_DM_MMC_OPS. Update it to
fully convert it to driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>

Update this driver to support a live device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>

We want to use fsl_esdhc_init() with driver model. Move the mmc_init() out
of this function so that we can use it for our common init.

Signed-off-by: Simon Glass <sjg@chromium.org>

With driver model we want to store the mmc and configuration structure in
platform data. Set up structure up and use it for non-DM as well.

Signed-off-by: Simon Glass <sjg@chromium.org>

Since esdhc_init_common() can fail it should return an error code. Update
this and also adjust the timeout mechanism to use get_timer(), which is a
more common approach.

Signed-off-by: Simon Glass <sjg@chromium.org>

Since esdhc_reset() can fail it should return an error code. Update this
and also adjust the timeout mechanism to use get_timer(), which is a more
common approach.

Signed-off-by: Simon Glass <sjg@chromium.org>

Driver model wants to use the core functions in this file but accesses the
driver-private data in a different way. Move the code into new 'common'
functions and set up stubs to call these. Also sort the operations into
alphabetical order for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>

With driver model we will not use mmc->priv to access driver-private data.
To accomodate this, update internal functions so that we can pass the
private data directly. This will allow the caller to obtain it as it
prefers.

Signed-off-by: Simon Glass <sjg@chromium.org>

Update this driver to support driver model. This involves implementing the
AHCI operations and reusing existing common code.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present the AHCI uclass is just a shell and we still use the global
functions to access SATA. Fix this by adding operations to the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>

Update the sata call to work with driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>