m68k: mcf5445x: move early ddr init as board-specific

For certain boot types and sbf, for V4 cpu's, an early ddr/sdram init
is required. This patch moves this ddr/sdram early initalization
away from start.S (to be board related).

Signed-off-by: Angelo Dureghello <angelo@sysam.it>

arch/m68k/cpu/mcf5445x/start.S

@@ -176,177 +176,12 @@ asm_dram_init:
 #if defined(CONFIG_CF_SBF)
 	move.b	#23, (%a1)		/* dspi */
 #endif
-	move.b	#46, (%a1)		/* DDR */
-
-	/* slew settings */
-	move.l	#0xEC094060, %a1
-	move.b	#0, (%a1)
-
-	/* use vco instead of cpu*2 clock for ddr clock */
-	move.l	#0xEC09001A, %a1
-	move.w	#0xE01D, (%a1)
-
-	/* DDR settings */
-	move.l	#0xFC0B8180, %a1
-	move.l	#0x00000000, (%a1)
-	move.l	#0x40000000, (%a1)
-
-	move.l	#0xFC0B81AC, %a1
-	move.l	#0x01030203, (%a1)
-
-	move.l	#0xFC0B8000, %a1
-	move.l	#0x01010101, (%a1)+	/* 0x00 */
-	move.l	#0x00000101, (%a1)+	/* 0x04 */
-	move.l	#0x01010100, (%a1)+	/* 0x08 */
-	move.l	#0x01010000, (%a1)+	/* 0x0C */
-	move.l	#0x00010101, (%a1)+	/* 0x10 */
-	move.l	#0xFC0B8018, %a1
-	move.l	#0x00010100, (%a1)+	/* 0x18 */
-	move.l	#0x00000001, (%a1)+	/* 0x1C */
-	move.l	#0x01000001, (%a1)+	/* 0x20 */
-	move.l	#0x00000100, (%a1)+	/* 0x24 */
-	move.l	#0x00010001, (%a1)+	/* 0x28 */
-	move.l	#0x00000200, (%a1)+	/* 0x2C */
-	move.l	#0x01000002, (%a1)+	/* 0x30 */
-	move.l	#0x00000000, (%a1)+	/* 0x34 */
-	move.l	#0x00000100, (%a1)+	/* 0x38 */
-	move.l	#0x02000100, (%a1)+	/* 0x3C */
-	move.l	#0x02000407, (%a1)+	/* 0x40 */
-	move.l	#0x02030007, (%a1)+	/* 0x44 */
-	move.l	#0x02000100, (%a1)+	/* 0x48 */
-	move.l	#0x0A030203, (%a1)+	/* 0x4C */
-	move.l	#0x00020708, (%a1)+	/* 0x50 */
-	move.l	#0x00050008, (%a1)+	/* 0x54 */
-	move.l	#0x04030002, (%a1)+	/* 0x58 */
-	move.l	#0x00000004, (%a1)+	/* 0x5C */
-	move.l	#0x020A0000, (%a1)+	/* 0x60 */
-	move.l	#0x0C00000E, (%a1)+	/* 0x64 */
-	move.l	#0x00002004, (%a1)+	/* 0x68 */
-	move.l	#0x00000000, (%a1)+	/* 0x6C */
-	move.l	#0x00100010, (%a1)+	/* 0x70 */
-	move.l	#0x00100010, (%a1)+	/* 0x74 */
-	move.l	#0x00000000, (%a1)+	/* 0x78 */
-	move.l	#0x07990000, (%a1)+	/* 0x7C */
-	move.l	#0xFC0B80A0, %a1
-	move.l	#0x00000000, (%a1)+	/* 0xA0 */
-	move.l	#0x00C80064, (%a1)+	/* 0xA4 */
-	move.l	#0x44520002, (%a1)+	/* 0xA8 */
-	move.l	#0x00C80023, (%a1)+	/* 0xAC */
-	move.l	#0xFC0B80B4, %a1
-	move.l	#0x0000C350, (%a1)	/* 0xB4 */
-	move.l	#0xFC0B80E0, %a1
-	move.l	#0x04000000, (%a1)+	/* 0xE0 */
-	move.l	#0x03000304, (%a1)+	/* 0xE4 */
-	move.l	#0x40040000, (%a1)+	/* 0xE8 */
-	move.l	#0xC0004004, (%a1)+	/* 0xEC */
-	move.l	#0x0642C000, (%a1)+	/* 0xF0 */
-	move.l	#0x00000642, (%a1)+	/* 0xF4 */
-	move.l	#0xFC0B8024, %a1
-	tpf
-	move.l	#0x01000100, (%a1)	/* 0x24 */
+#endif	/* CONFIG_MCF5441x */
 
-	move.l	#0x2000, %d1
-	jsr	asm_delay
-#endif		/* CONFIG_MCF5441x */
-
-#ifdef CONFIG_MCF5445x
-	/* Dram Initialization a1, a2, and d0 */
-	/* mscr sdram */
-	move.l	#0xFC0A4074, %a1
-	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
-	nop
-
-	/* SDRAM Chip 0 and 1 */
-	move.l	#0xFC0B8110, %a1
-	move.l	#0xFC0B8114, %a2
-
-	/* calculate the size */
-	move.l	#0x13, %d1
-	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
-#ifdef CONFIG_SYS_SDRAM_BASE1
-	lsr.l	#1, %d2
-#endif
-
-dramsz_loop:
-	lsr.l	#1, %d2
-	add.l	#1, %d1
-	cmp.l	#1, %d2
-	bne	dramsz_loop
-#ifdef CONFIG_SYS_NAND_BOOT
-	beq	asm_nand_chk_status
-#endif
-	/* SDRAM Chip 0 and 1 */
-	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
-	or.l	%d1, (%a1)
-#ifdef CONFIG_SYS_SDRAM_BASE1
-	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
-	or.l	%d1, (%a2)
-#endif
-	nop
-
-	/* dram cfg1 and cfg2 */
-	move.l	#0xFC0B8008, %a1
-	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
-	nop
-	move.l	#0xFC0B800C, %a2
-	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
-	nop
-
-	move.l	#0xFC0B8000, %a1	/* Mode */
-	move.l	#0xFC0B8004, %a2	/* Ctrl */
-
-	/* Issue PALL */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-	nop
-
-#ifdef CONFIG_M54455EVB
-	/* Issue LEMR */
-	move.l	#(CONFIG_SYS_SDRAM_EMOD + 0x408), (%a1)
-	nop
-	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x300), (%a1)
-	nop
-#endif
-
-	move.l	#1000, %d1
-	jsr	asm_delay
-
-	/* Issue PALL */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
-	nop
-
-	/* Perform two refresh cycles */
-	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
-	nop
-	move.l	%d0, (%a2)
-	move.l	%d0, (%a2)
-	nop
-
-#ifdef CONFIG_M54455EVB
-	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x200), (%a1)
-	nop
-#elif defined(CONFIG_M54451EVB)
-	/* Issue LEMR */
-	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a1)
-	nop
-	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a1)
-#endif
-
-	move.l	#500, %d1
-	jsr	asm_delay
-
-	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d1
-	and.l	#0x7FFFFFFF, %d1
-#ifdef CONFIG_M54455EVB
-	or.l	#0x10000C00, %d1
-#elif defined(CONFIG_M54451EVB)
-	or.l	#0x10000C00, %d1
-#endif
-	move.l	%d1, (%a2)
-	nop
-
-	move.l	#2000, %d1
-	jsr	asm_delay
-#endif /* CONFIG_MCF5445x */
+	/* mandatory board level ddr-sdram init,
+	 * for both 5441x and 5445x
+	 */
+	bsr	sbf_dram_init
 
 #ifdef CONFIG_CF_SBF
 	/*
@@ -537,7 +372,7 @@ asm_nand_init:
 	move.l  #0x000e0000, (%a1)
 
 	move.l	#0x2000, %d1
-	jsr	asm_delay
+	bsr	asm_delay
 
 	/* setup nand */
 	move.l  #0xFC0FFF00, %a1
@@ -565,7 +400,7 @@ asm_nand_read:
 	move.l	%d0, (%a0)
 
 	move.l	#0x200, %d1
-	jsr	asm_delay
+	bsr	asm_delay
 
 asm_nand_chk_status:
 	move.l  #0xFC0FFF38, %a4	/* isr */
@@ -595,6 +430,7 @@ asm_nand_copy:
 
 #endif			/* CONFIG_SYS_NAND_BOOT */
 
+.globl asm_delay
 asm_delay:
 	nop
 	subq.l	#1, %d1

board/freescale/m54418twr/Makefile

@@ -5,3 +5,5 @@
 #
 
 obj-y	= m54418twr.o
+extra-y	+= sbf_dram_init.o
+

board/freescale/m54418twr/sbf_dram_init.S

+/*
+ * Board-specific sbf ddr/sdram init.
+ *
+ * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.global sbf_dram_init
+.text
+
+sbf_dram_init:
+	move.l	#0xFC04002D, %a1
+	move.b	#46, (%a1)		/* DDR */
+
+	/* slew settings */
+	move.l	#0xEC094060, %a1
+	move.b	#0, (%a1)
+
+	/* use vco instead of cpu*2 clock for ddr clock */
+	move.l	#0xEC09001A, %a1
+	move.w	#0xE01D, (%a1)
+
+	/* DDR settings */
+	move.l	#0xFC0B8180, %a1
+	move.l	#0x00000000, (%a1)
+	move.l	#0x40000000, (%a1)
+
+	move.l	#0xFC0B81AC, %a1
+	move.l	#0x01030203, (%a1)
+
+	move.l	#0xFC0B8000, %a1
+	move.l	#0x01010101, (%a1)+	/* 0x00 */
+	move.l	#0x00000101, (%a1)+	/* 0x04 */
+	move.l	#0x01010100, (%a1)+	/* 0x08 */
+	move.l	#0x01010000, (%a1)+	/* 0x0C */
+	move.l	#0x00010101, (%a1)+	/* 0x10 */
+	move.l	#0xFC0B8018, %a1
+	move.l	#0x00010100, (%a1)+	/* 0x18 */
+	move.l	#0x00000001, (%a1)+	/* 0x1C */
+	move.l	#0x01000001, (%a1)+	/* 0x20 */
+	move.l	#0x00000100, (%a1)+	/* 0x24 */
+	move.l	#0x00010001, (%a1)+	/* 0x28 */
+	move.l	#0x00000200, (%a1)+	/* 0x2C */
+	move.l	#0x01000002, (%a1)+	/* 0x30 */
+	move.l	#0x00000000, (%a1)+	/* 0x34 */
+	move.l	#0x00000100, (%a1)+	/* 0x38 */
+	move.l	#0x02000100, (%a1)+	/* 0x3C */
+	move.l	#0x02000407, (%a1)+	/* 0x40 */
+	move.l	#0x02030007, (%a1)+	/* 0x44 */
+	move.l	#0x02000100, (%a1)+	/* 0x48 */
+	move.l	#0x0A030203, (%a1)+	/* 0x4C */
+	move.l	#0x00020708, (%a1)+	/* 0x50 */
+	move.l	#0x00050008, (%a1)+	/* 0x54 */
+	move.l	#0x04030002, (%a1)+	/* 0x58 */
+	move.l	#0x00000004, (%a1)+	/* 0x5C */
+	move.l	#0x020A0000, (%a1)+	/* 0x60 */
+	move.l	#0x0C00000E, (%a1)+	/* 0x64 */
+	move.l	#0x00002004, (%a1)+	/* 0x68 */
+	move.l	#0x00000000, (%a1)+	/* 0x6C */
+	move.l	#0x00100010, (%a1)+	/* 0x70 */
+	move.l	#0x00100010, (%a1)+	/* 0x74 */
+	move.l	#0x00000000, (%a1)+	/* 0x78 */
+	move.l	#0x07990000, (%a1)+	/* 0x7C */
+	move.l	#0xFC0B80A0, %a1
+	move.l	#0x00000000, (%a1)+	/* 0xA0 */
+	move.l	#0x00C80064, (%a1)+	/* 0xA4 */
+	move.l	#0x44520002, (%a1)+	/* 0xA8 */
+	move.l	#0x00C80023, (%a1)+	/* 0xAC */
+	move.l	#0xFC0B80B4, %a1
+	move.l	#0x0000C350, (%a1)	/* 0xB4 */
+	move.l	#0xFC0B80E0, %a1
+	move.l	#0x04000000, (%a1)+	/* 0xE0 */
+	move.l	#0x03000304, (%a1)+	/* 0xE4 */
+	move.l	#0x40040000, (%a1)+	/* 0xE8 */
+	move.l	#0xC0004004, (%a1)+	/* 0xEC */
+	move.l	#0x0642C000, (%a1)+	/* 0xF0 */
+	move.l	#0x00000642, (%a1)+	/* 0xF4 */
+	move.l	#0xFC0B8024, %a1
+	tpf
+	move.l	#0x01000100, (%a1)	/* 0x24 */
+
+	move.l	#0x2000, %d1
+	bsr	asm_delay
+
+	rts

board/freescale/m54451evb/Makefile

@@ -6,3 +6,4 @@
 #
 
 obj-y	= m54451evb.o
+extra-y	+= sbf_dram_init.o

board/freescale/m54451evb/sbf_dram_init.S

+/*
+ * Board-specific sbf ddr/sdram init.
+ *
+ * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+ #include <config.h>
+
+.global sbf_dram_init
+.text
+
+sbf_dram_init:
+	/* Dram Initialization a1, a2, and d0 */
+	/* mscr sdram */
+	move.l	#0xFC0A4074, %a1
+	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
+	nop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#0xFC0B8110, %a1
+	move.l	#0xFC0B8114, %a2
+
+	/* calculate the size */
+	move.l	#0x13, %d1
+	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	lsr.l	#1, %d2
+#endif
+
+dramsz_loop:
+	lsr.l	#1, %d2
+	add.l	#1, %d1
+	cmp.l	#1, %d2
+	bne	dramsz_loop
+#ifdef CONFIG_SYS_NAND_BOOT
+	beq	asm_nand_chk_status
+#endif
+	/* SDRAM Chip 0 and 1 */
+	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
+	or.l	%d1, (%a1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
+	or.l	%d1, (%a2)
+#endif
+	nop
+
+	/* dram cfg1 and cfg2 */
+	move.l	#0xFC0B8008, %a1
+	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
+	nop
+	move.l	#0xFC0B800C, %a2
+	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
+	nop
+
+	move.l	#0xFC0B8000, %a1	/* Mode */
+	move.l	#0xFC0B8004, %a2	/* Ctrl */
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	move.l	#1000, %d1
+	bsr	asm_delay
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Perform two refresh cycles */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
+	nop
+	move.l	%d0, (%a2)
+	move.l	%d0, (%a2)
+	nop
+
+	/* Issue LEMR */
+	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a1)
+	nop
+	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a1)
+
+	move.l	#500, %d1
+	bsr	asm_delay
+
+	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d1
+	and.l	#0x7FFFFFFF, %d1
+
+	or.l	#0x10000C00, %d1
+
+	move.l	%d1, (%a2)
+	nop
+
+	move.l	#2000, %d1
+	bsr	asm_delay
+
+	rts

board/freescale/m54455evb/Makefile

@@ -6,3 +6,4 @@
 #
 
 obj-y	= m54455evb.o
+extra-y	+= sbf_dram_init.o

board/freescale/m54455evb/sbf_dram_init.S

+/*
+ * Board-specific sbf ddr/sdram init.
+ *
+ * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+ #include <config.h>
+
+.global sbf_dram_init
+.text
+
+sbf_dram_init:
+	/* Dram Initialization a1, a2, and d0 */
+	/* mscr sdram */
+	move.l	#0xFC0A4074, %a1
+	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
+	nop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#0xFC0B8110, %a1
+	move.l	#0xFC0B8114, %a2
+
+	/* calculate the size */
+	move.l	#0x13, %d1
+	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	lsr.l	#1, %d2
+#endif
+
+dramsz_loop:
+	lsr.l	#1, %d2
+	add.l	#1, %d1
+	cmp.l	#1, %d2
+	bne	dramsz_loop
+#ifdef CONFIG_SYS_NAND_BOOT
+	beq	asm_nand_chk_status
+#endif
+	/* SDRAM Chip 0 and 1 */
+	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
+	or.l	%d1, (%a1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
+	or.l	%d1, (%a2)
+#endif
+	nop
+
+	/* dram cfg1 and cfg2 */
+	move.l	#0xFC0B8008, %a1
+	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
+	nop
+	move.l	#0xFC0B800C, %a2
+	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
+	nop
+
+	move.l	#0xFC0B8000, %a1	/* Mode */
+	move.l	#0xFC0B8004, %a2	/* Ctrl */
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Issue LEMR */
+	move.l	#(CONFIG_SYS_SDRAM_EMOD + 0x408), (%a1)
+	nop
+	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x300), (%a1)
+	nop
+
+	move.l	#1000, %d1
+	bsr	asm_delay
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Perform two refresh cycles */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
+	nop
+	move.l	%d0, (%a2)
+	move.l	%d0, (%a2)
+	nop
+
+	move.l	#(CONFIG_SYS_SDRAM_MODE + 0x200), (%a1)
+	nop
+
+	move.l	#500, %d1
+	bsr	asm_delay
+
+	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d1
+	and.l	#0x7FFFFFFF, %d1
+
+	or.l	#0x10000C00, %d1
+
+	move.l	%d1, (%a2)
+	nop
+
+	move.l	#2000, %d1
+	bsr	asm_delay
+
+	rts

include/configs/M54418TWR.h

@@ -24,6 +24,8 @@
 #define CONFIG_SYS_UART_PORT		(0)
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
+#define LDS_BOARD_TEXT			board/freescale/m54418twr/sbf_dram_init.o (.text*)
+
 #undef CONFIG_WATCHDOG
 
 #define CONFIG_TIMESTAMP	/* Print image info with timestamp */

include/configs/M54451EVB.h

@@ -23,6 +23,8 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
+#define LDS_BOARD_TEXT                  board/freescale/m54451evb/sbf_dram_init.o (.text*)
+
 #undef CONFIG_WATCHDOG
 
 #define CONFIG_TIMESTAMP	/* Print image info with timestamp */

include/configs/M54455EVB.h

@@ -23,6 +23,8 @@
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
+#define LDS_BOARD_TEXT                  board/freescale/m54455evb/sbf_dram_init.o (.text*)
+
 #undef CONFIG_WATCHDOG
 
 #define CONFIG_TIMESTAMP	/* Print image info with timestamp */