This enables generic board support so that ppc boards can define
CONFIG_SYS_GENERIC_BOARD.

Signed-off-by: Simon Glass <sjg@chromium.org>

This adds ppc features to the generic post-relocation board init.

Signed-off-by: Simon Glass <sjg@chromium.org>

This adds ppc features to the generic pre-relocation board init.

This is a separate commit so that these features are clearly shown.

Signed-off-by: Simon Glass <sjg@chromium.org>

Link symbols as created by the link script can either be absolute or
relative to the text start. This option switches between the two options
so that we can support both.

As we convert architectures over to generic board, we can see if this
option is actually needed, or whether it is possible to unify this feature
also.

Signed-off-by: Simon Glass <sjg@chromium.org>

This enables generic board support so that ARM boards can define
CONFIG_SYS_GENERIC_BOARD.

Signed-off-by: Simon Glass <sjg@chromium.org>

These boards define CONFIG_LAST_STAGE_INIT and CONFIG_BOARD_EARLY_INIT_R
but these options are not available on ARM. Move them into the powerpc
common file instead.

This change affects: km_kirkwood_pci, mgcoge3un, kmnusa, kmcoge5un,
km_kirkwood and portl2.

Signed-off-by: Simon Glass <sjg@chromium.org>

This adds secondary program loader support to the generic board.

Signed-off-by: Simon Glass <sjg@chromium.org>

This file handles common post-relocation init for boards which use
the generic framework.

Signed-off-by: Simon Glass <sjg@chromium.org>

This file handles common pre-relocation init for boards which use
the generic framework.

It starts up the console, DRAM, performs relocation and then jumps
to post-relocation init.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Wolfgang Denk <wd@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>

These functions are only available for powerpc and are not declared in a
header file. We want to use the rest function in two places (board_f and
board_r), so declare the functions in watchdog.h.

Signed-off-by: Simon Glass <sjg@chromium.org>

We are introducing a new unified board setup. Add a check to make sure that
board config files do not define CONFIG_SYS_GENERIC_BOARD unless their
architecture defines __HAVE_ARCH_GENERIC_BOARD

__HAVE_ARCH_GENERIC_BOARD will currently not be the default setting, but
we can switch this later when most architecture support generic board.

Signed-off-by: Simon Glass <sjg@chromium.org>

This library supports calling a list of functions one after the
other.

It is intended that we move to a more powerful initcall implementation
as proposed by Graeme Russ <graeme.russ@gmail.com>. For now, this allows
us to do the basics.

Signed-off-by: Simon Glass <sjg@chromium.org>

We can use the declarations of __bss_start and _end from this header
instead of declaring them locally.

Signed-off-by: Simon Glass <sjg@chromium.org>

Include this header to get access to link symbols, which are otherwise
removed.

Signed-off-by: Simon Glass <sjg@chromium.org>

We create a separate header file for link symbols defined by the link
scripts. It is helpful to have these all in one place and try to
make them common across architectures. Since Linux already has a similar
file, we bring this in even though many of the symbols there are not
relevant to us.

Each architecture has its own asm/sections.h where symbols specifc to
that architecture can be added. For now everything except AVR32 just
includes the generic header.

One change is needed in arch/avr32/lib/board.c to make this conversion
work.

Reviewed-by: Tom Rini <trini@ti.com> (version 5)
Signed-off-by: Simon Glass <sjg@chromium.org>

Note this is a tree-wide change affecting multiple architectures.

At present we use __bss_start, but mostly __bss_end__. This seems
inconsistent and in a number of places __bss_end is used instead.

Change to use __bss_end for the BSS end symbol throughout U-Boot. This
makes it possible to use the asm-generic/sections.h file on all
archs.

Signed-off-by: Simon Glass <sjg@chromium.org>

This file holds the board info structure. We need this to be generic
for the unified board series, so create a structure which contains
the basic fields required by the main architectures.

Signed-off-by: Simon Glass <sjg@chromium.org>

This patch corrects the following issues

1) Write the correct M/T Stop value to I2CSTAT after i2c write.
   According to the spec, after finish the data transmission, we should
   write a M/T Stop (I2C_MODE_MT | I2C_TXRX_ENA) to I2CSTAT instead of
   a M/R Stop (I2C_MODE_MR | I2C_TXRX_ENA).
2) Not split the write to I2CSTAT into 2 steps in i2c read.
   According to the spec, we should write the combined M/R Start value to
   I2CSTAT after setting the slave address to I2CDS
3) Fix the mistake of making an equality check to an assignment.
   In the case of I2C write with the zero-length address, while tranfering the
   data, it should be an equality check (==) instead of an assignment (=).

Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>

This revomes the code under #if 0 in the s3c24x0_i2c driver.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>

mem_test_quick and mem_test_alt functions are only called by
do_mem_mtest, so move them under the #ifdef

Signed-off-by: Tom Rini <trini@ti.com>

Because the code that handles bootdelay is compiled in conditionally
based on the default value, you are restricted in the default,
regardless of what you want the runtime options to be.

Change the source to always check if any default is given so that other
values can be selected and used at runtime.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

When using $fdtaddr in $bootcmd and $bootcmd is automatically called,
$fdtaddr is yet not defined.

Signed-off-by: Barak Wasserstrom <wbarak@gmail.com>

The "env ask" traditionally uses a somewhat awkward syntax:

	env ask name [message ...] [size]

So far, when a mesage was given, you always also had to enter a size.
If you forgot to do that, the command would terminate without any
indication of the problem.

To avoid incompatible changes of the interface, we now check the last
argument if it can be converted into a decimal number.  If this is the
case, we assume it is a size; otherwise we treat it as part of the
message.

Also, add a space after the message fore easier reading,
and clean up help mesage.

Signed-off-by: Wolfgang Denk <wd@denx.de>

When using the partial read feature of fatwrite the buffer we read into
can become unaligned not just due to initial location but the size of
our partial reads as well.  Make this clear in the help text.

Signed-off-by: Tom Rini <trini@ti.com>

In certain cases, memory device is present as flat file or block device (via
mmc or mtdblock layer). Do not attempt MTD operations against it.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

Nothing appears to use or compile cmd_df.c anymore.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

That's a bit presumptuous of you, u-boot!

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

i.e., from the linux kernel's commit
be987d9f80354e2e919926349282facd74992f90

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

without this, patches don't get checked for proper alignment,
and e.g., for spaces after a cast and/or before a semicolon.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

The core implementation of "help" already prints the command name before
the help text of a specific command. Remove it from part's own help text
to avoid it being printed twice:

Tegra114 (Dalmore) # help part
part - disk partition related commands

Usage:
part part uuid <interface> <dev>:<part>
    - print partition UUID
...

Signed-off-by: Stephen Warren <swarren@nvidia.com>

ps on BSD hosts (like OS X) do not provide the --no-headers switch nor
understand the AIX format descriptions. Unfortunately there seems no solution to
get the PIDs of children in a platfrom independent manner.
Therefore detect the OS and decide upon that which way to go.

This patch makes the MAKEALL script cleanly stoppable on bare OS X when using
the parallel builds of targets.

Additionally this patch removes double call to grep by a single call to sed for
GNU style child PID detection.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

Signed-off-by: Gray Remlin <gryrmln@gmail.com>

These boards seem to be unmaintained for quite some time. So lets
remove support for them completely. This also cleans up some
common drivers/files.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch>
Acked-by: Wolfgang Denk <wd@denx.de>

This patch adds whitespace to the printed hex numbers to have an aligned ASCII
printout at the end of the line.

This changes for example the md output from:

---8<---
OMAP3 Tricorder # md.l $loadaddr 5
82000000: 30200109 20a4028c 90010000 08a00000    .. 0... ........
82000010: 01010000    ....
--->8---

to

---8<---
OMAP3 Tricorder # md.l $loadaddr 5
82000000: 30200109 20a4028c 90010000 08a00000    .. 0... ........
82000010: 01010000                               ....
--->8---

The cost of this is about 72 byte .text increase (tested with at91 build).

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

The "mtest" command is of little practical use (if any), and
experience has shown that a large number of board configurations
define useless or even dangerous start and end addresses.  If not even
the board maintainers are able to figure out which memory range can be
reliably tested, how can we expect such from the end users?  As this
problem comes up repeatedly, we rather do not enable this command by
default, so only people who know what they are doing will be
confronted with it.

As this changes the user interface, we allow for a grace period
before this change takes effect. For now, we make "mtest"
configurable through the CONFIG_CMD_MEMTEST variable, which is defined
in include/config_cmd_default.h;  we also add an entry to
doc/feature-removal-schedule.txt which announces the removal of this
default setting in two releases from now, i. e. with v2013.07.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>

All boards from this serie uses i2c. So we can drop these unneeded
defines.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>