- Sep 30, 2017
-
-
David Wu authored
Enable the SARADC for download key pressed detect. Signed-off-by:
David Wu <david.wu@rock-chips.com> Acked-by:
Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by:
-
David Wu authored
Enable the SARADC for download key pressed detect. Signed-off-by:
-
David Wu authored
Enable the SARADC for download key pressed detect. Signed-off-by:
-
David Wu authored
Enable the SARADC for download key pressed detect. Signed-off-by:
-
David Wu authored
Enable the SARADC for download key pressed detect. Signed-off-by:
-
David Wu authored
Enable the SARADC for download key pressed detect. Signed-off-by:
-
David Wu authored
Signed-off-by:
-
David Wu authored
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 8-bits width. Signed-off-by:
-
David Wu authored
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 8-bits width. Signed-off-by:
-
David Wu authored
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 10-bits width. Signed-off-by:
-
David Wu authored
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 8-bits width. Signed-off-by:
-
David Wu authored
The clk_saradc is dividing from the 24M, clk_saradc=24MHz/(saradc_div_con+1). SARADC integer divider control register is 10-bits width. Signed-off-by:
-
David Wu authored
The ADC can support some channels signal-ended some bits Successive Approximation Register (SAR) A/D Converter, like 6-channel and 10-bit. It converts the analog input signal into some bits binary digital codes. Signed-off-by:
-
- Sep 29, 2017
-
-
Sam Protsenko authored
Add tracing printings to Linux/Android boot commands, so that we can see what's going on. Helps to trace possible bugs on early stages and improves the output for user (which is especially useful, because we have a bunch of boot commands executing one by one). Signed-off-by:
Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by:
Tom Rini <trini@konsulko.com>
-
Sam Protsenko authored
Extract commands for booting Linux from eMMC to separate command. It seems more logical that way, and allows us to run the whole command set from U-Boot shell with only one command. Signed-off-by:
-
Sam Protsenko authored
Right now on OMAP5-based boards we have only one partition defined for Linux boot, which is rootfs. That doesn't work with bootpart=1:2 (that is defined in include/environment/ti/boot.h). To fix Linux boot we may either: 1. Change bootpart to be 1:1 2. Or add preceding partition, so that rootfs is actually 1:2 Second choice seems more reasonable, as DFU is already using similar partition table and can rely on bootpart to be 1:2. This patch adds "bootloader" partition. So now eMMC layout for Linux boot looks like this: offset content size partition (KiB) (KiB) Reviewed-by:
-
Sam Protsenko authored
Right now on OMAP5-based boards we have only one partition defined for Linux boot, which is rootfs. That doesn't work with bootpart=1:2 (that is defined in include/environment/ti/boot.h). To fix Linux boot we may either: 1. Change bootpart to be 1:1 2. Or add preceding partition, so that rootfs is actually 1:2 Second choice seems more reasonable, as DFU is already using similar partition table and can rely on bootpart to be 1:2. This patch adds "bootloader" partition. So now eMMC layout for Linux boot looks like this: offset content size partition (KiB) (KiB) Reviewed-by:
-
Karthik Tummala authored
This re-syncs omap3 DTS file with current file from Linux v4.14-rc1 to ensure a consistent configuration. Upstream Linux removed the redundant Interrupt-parent property from usbhsohci, usbhsehci, ssi_port1 and ssi_port2 sub nodes. Signed-off-by:Karthik Tummala <karthik@techveda.org>
-
Patrice Chotard authored
Add missing .priv_auto_alloc_size() callback. Previously private struct stm32_clk was not allocate which leads to unpredictable behaviour Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Lokesh Vutla authored
With DM enabled, gpio numbering is assigned based on the probed order of gpios, irrespective of the gpio base. So enable all necessary gpios in SPL. Fixes: edf25d94d55c (“ARM: dts: OMAP5+: Enable gpio in SPL”) Reported-by:
Gou, Hongmei <h-gou@ti.com> Tested-by:
Aparna Balasubramanian <aparnab@ti.com> Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com>
-
Lokesh Vutla authored
Now the u-boot spi image is greater than 0x80000, increase the same in env during spi erase. Reported-by:
Yan Liu <yan-liu@ti.com> Signed-off-by:
-
Andrew F. Davis authored
On all other platforms the command 'findfdt' populates the variable 'fdtfile', but on K2G we only populate 'name_fdt'. The generic boot and automation scripts fail when 'findfdt' is not populated, fix this for K2G. Signed-off-by:Andrew F. Davis <afd@ti.com>
-
Andrew F. Davis authored
On secure devices the initial secure software may install a firewall at the end of DRAM, define protected RAM to avoid space. Signed-off-by: -
Madan Srinivas authored
This patch adds support for authentication of both plain text and encrypted binaries. A new SECDEV package is needed to enable encryption of binaries by default for AM3x. The ROM authentication API detects encrypted images at runtime and automatically decrypts the image if the signature verification passes. Addition of encryption on AM3x results in a change in the image format. On AM4x, AM5x and, on AM3x devices signing clear test images, the signature is appended to the end of the binary. On AM3x, when the SECDEV package is used to create signed and encrypted images, the signature is added as a header to the start of the binary. So the binary size calculation has been updated to reflect this change. The signing tools and encrypted image format for AM3x cannot be changed to behave like AM4x and AM5x to maintain backward compatibility with older Sitara M-Shield releases. Signed-off-by:
Madan Srinivas <madans@ti.com> Signed-off-by:
-
Andrew F. Davis authored
Add a new defconfig file for the AM335x High Security EVM. This config is specific for the case of UART booting Signed-off-by: -
Adam Ford authored
With the device tree ported from Linux 4.13, this enables Driver Model and Device Tree support for the am3517-evm Signed-off-by:
Adam Ford <aford173@gmail.com> Tested-by:
Derald D. Woods <woods.technical@gmail.com>
-
Adam Ford authored
To keep the DTS and DTSI files clean and in sync with Linux, new u-boot.dtsi files are added. There are some spacing issues in the patch, but they appear to be present in the Linux source files. I'll try to get to fixing them there, and do a future re-sync at a later date. Signed-off-by:
-
Ulf Magnusson authored
Corresponds to 375506d (File writing nit) from upstream (https://github.com/ulfalizer/Kconfiglib ). Adds proper 'imply' support and fixes a few minor issues, one of which previously triggered the following weird warning: configs/taurus_defconfig: /tmp/tmpisI45S:6: warning: assignment to SPL_LDSCRIPT changes mode of containing choice from "arch/$(ARCH)/cpu/u-boot-spl.lds" to "y" The change in 8639f69a (genconfig.py: Print defconfig next to warnings) was reapplied. tools/moveconfig.py previously depended on a hack that merged 'select's with 'imply's. It was modified to look at the union of Symbol.get_selected_symbols() and Symbol.get_implied_symbols(), which should give the same behavior. tools/genboardscfg.py was verified to produce identical board.cfg's before and after the change. Signed-off-by:
Ulf Magnusson <ulfalizer@gmail.com>
-
Heinrich Schuchardt authored
Checkpatch can use two dictionaries for finding typos: * scripts/spelling.txt * /usr/share/codespell/dictionary.txt which comes with package codespell and is selected by parameter --codespell If the file scripts/spelling.txt is missing, a warning is shown. Add the spelling.txt file from the Linux kernel 4.13 source. We can later add our own typo corrections. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by:
Dan Murphy <dmurphy@ti.com>
-
Stephen Warren authored
The current code wraps a pre tag inside an a tag. For some reason, this causes at least Firefox to attempt to drag the pre section content when using a mouse drag to select text. Re-order the tags so that the text can be selected using the mouse, at least if you start the drag outside the text (after the end of the line, for example). Signed-off-by:Stephen Warren <swarren@nvidia.com>
-
Stephen Warren authored
Some tests use external tools (executables) during their operation. Add a test.py mark to indicate this. This allows those tests to be skipped if the required tool is not present. Signed-off-by: -
Stephen Warren authored
When skipping tests, explicitly mention the board type or config option that caused the skip. This will help people understand/fix any issues. Signed-off-by: -
Stephen Warren authored
Some tests rely on external tools. Mention these in the test/py README. Signed-off-by: -
Tom Rini authored
On ARCH_OMAP2PLUS platforms we know what the DDR layout is going to be, and that it is safe to use SPL_STACK_R and provide a default value for it. select this and re-sync the defconfigs. Signed-off-by: -
Adam Ford authored
With DM now enabled with the device tree pulled from Linux, we can enable DM_I2C in U-Boot. Reviewed-by:
Jagan Teki <jagan@openedev.com> Signed-off-by:
-
Adam Ford authored
There is a discrepency between U-Boot and Linux on the partition map. This enabes the MTD parts to pass MTD partition information from U-Boot to Linux. Linux already has a pending patch to enable MTD PARTS in davinci_all_defconfig Reviewed-by:
-
Adam Ford authored
With the device tree ported and DM compatible drivers, enable: OF_CONTROL, DM_SPI, DM_SPI_FLASH and DM_SERIAL Note: DM_SERIAL is not enabled for da850evm_direct_nor_defconfig yet. Reviewed-by:
-
Adam Ford authored
The DM support is already in the driver, so add da830-spi to the compatible list. Reviewed-by:
-
Adam Ford authored
A few small additional items are needed to support DM_SPI and DM_SERIAL, so those were added to da850-evm-u-boot.dtsi Signed-off-by: -
git://git.denx.de/u-boot-mmcTom Rini authored
-
