omap_hsmmc.c

};
#else
static const struct mmc_ops omap_hsmmc_ops = {
	.send_cmd	= omap_hsmmc_send_cmd,
	.set_ios	= omap_hsmmc_set_ios,
	.init		= omap_hsmmc_init_setup,
#ifdef OMAP_HSMMC_USE_GPIO
	.getcd		= omap_hsmmc_getcd,
	.getwp		= omap_hsmmc_getwp,
#endif
};
#endif

#if !CONFIG_IS_ENABLED(DM_MMC)
int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
		int wp_gpio)
{
	struct mmc *mmc;
	struct omap_hsmmc_data *priv;
	struct mmc_config *cfg;
	uint host_caps_val;

	priv = malloc(sizeof(*priv));
	if (priv == NULL)
		return -1;

	host_caps_val = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS;

	switch (dev_index) {
	case 0:
		priv->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE;
		break;
#ifdef OMAP_HSMMC2_BASE
	case 1:
		priv->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE;
#if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
	defined(CONFIG_DRA7XX) || defined(CONFIG_AM33XX) || \
	defined(CONFIG_AM43XX) || defined(CONFIG_SOC_KEYSTONE)) && \
		defined(CONFIG_HSMMC2_8BIT)
		/* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */
		host_caps_val |= MMC_MODE_8BIT;
#endif
		break;
#endif
#ifdef OMAP_HSMMC3_BASE
	case 2:
		priv->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE;
#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT)
		/* Enable 8-bit interface for eMMC on DRA7XX */
		host_caps_val |= MMC_MODE_8BIT;
#endif
		break;
#endif
	default:
		priv->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE;
		return 1;
	}
#ifdef OMAP_HSMMC_USE_GPIO
	/* on error gpio values are set to -1, which is what we want */
	priv->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd");
	priv->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp");
#endif

	cfg = &priv->cfg;

	cfg->name = "OMAP SD/MMC";
	cfg->ops = &omap_hsmmc_ops;

	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
	cfg->host_caps = host_caps_val & ~host_caps_mask;

	cfg->f_min = 400000;

	if (f_max != 0)
		cfg->f_max = f_max;
	else {
		if (cfg->host_caps & MMC_MODE_HS) {
			if (cfg->host_caps & MMC_MODE_HS_52MHz)
				cfg->f_max = 52000000;
			else
				cfg->f_max = 26000000;
		} else
			cfg->f_max = 20000000;
	}

	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;

#if defined(CONFIG_OMAP34XX)
	/*
	 * Silicon revs 2.1 and older do not support multiblock transfers.
	 */
	if ((get_cpu_family() == CPU_OMAP34XX) && (get_cpu_rev() <= CPU_3XX_ES21))
		cfg->b_max = 1;
#endif
	mmc = mmc_create(cfg, priv);
	if (mmc == NULL)
		return -1;

	return 0;
}
#else
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
static int omap_hsmmc_ofdata_to_platdata(struct udevice *dev)
{
	struct omap_hsmmc_plat *plat = dev_get_platdata(dev);
	struct mmc_config *cfg = &plat->cfg;
	const void *fdt = gd->fdt_blob;
	int node = dev_of_offset(dev);
	int val;

	plat->base_addr = map_physmem(devfdt_get_addr(dev),
				      sizeof(struct hsmmc *),
				      MAP_NOCACHE);

	cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS;
	val = fdtdec_get_int(fdt, node, "bus-width", -1);
	if (val < 0) {
		printf("error: bus-width property missing\n");
		return -ENOENT;
	}

	switch (val) {
	case 0x8:
		cfg->host_caps |= MMC_MODE_8BIT;
	case 0x4:
		cfg->host_caps |= MMC_MODE_4BIT;
		break;
	default:
		printf("error: invalid bus-width property\n");
		return -ENOENT;
	}

	cfg->f_min = 400000;
	cfg->f_max = fdtdec_get_int(fdt, node, "max-frequency", 52000000);
	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
	if (fdtdec_get_bool(fdt, node, "ti,dual-volt"))
		plat->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
	if (fdtdec_get_bool(fdt, node, "no-1-8-v"))
		plat->controller_flags |= OMAP_HSMMC_NO_1_8_V;

#ifdef OMAP_HSMMC_USE_GPIO
	plat->cd_inverted = fdtdec_get_bool(fdt, node, "cd-inverted");
#endif

	return 0;
}
#endif

#ifdef CONFIG_BLK

static int omap_hsmmc_bind(struct udevice *dev)
{
	struct omap_hsmmc_plat *plat = dev_get_platdata(dev);

	return mmc_bind(dev, &plat->mmc, &plat->cfg);
}
#endif
static int omap_hsmmc_probe(struct udevice *dev)
{
	struct omap_hsmmc_plat *plat = dev_get_platdata(dev);
	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
	struct omap_hsmmc_data *priv = dev_get_priv(dev);
	struct mmc_config *cfg = &plat->cfg;
	struct mmc *mmc;

	cfg->name = "OMAP SD/MMC";
	priv->base_addr = plat->base_addr;
#ifdef OMAP_HSMMC_USE_GPIO
	priv->cd_inverted = plat->cd_inverted;
#endif

#ifdef CONFIG_BLK
	mmc = &plat->mmc;
#else
	mmc = mmc_create(cfg, priv);
	if (mmc == NULL)
		return -1;
#endif

#if defined(OMAP_HSMMC_USE_GPIO) && CONFIG_IS_ENABLED(OF_CONTROL)
	gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN);
	gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, GPIOD_IS_IN);
#endif

	mmc->dev = dev;
	upriv->mmc = mmc;

	return omap_hsmmc_init_setup(mmc);
}

#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
static const struct udevice_id omap_hsmmc_ids[] = {
	{ .compatible = "ti,omap3-hsmmc" },
	{ .compatible = "ti,omap4-hsmmc" },
	{ .compatible = "ti,am33xx-hsmmc" },
	{ }
};
#endif

U_BOOT_DRIVER(omap_hsmmc) = {
	.name	= "omap_hsmmc",
	.id	= UCLASS_MMC,
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
	.of_match = omap_hsmmc_ids,
	.ofdata_to_platdata = omap_hsmmc_ofdata_to_platdata,
	.platdata_auto_alloc_size = sizeof(struct omap_hsmmc_plat),
#endif
#ifdef CONFIG_BLK
	.bind = omap_hsmmc_bind,
#endif
	.ops = &omap_hsmmc_ops,
	.probe	= omap_hsmmc_probe,
	.priv_auto_alloc_size = sizeof(struct omap_hsmmc_data),
	.flags	= DM_FLAG_PRE_RELOC,
};
#endif