Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • reform/reform-boundary-uboot
  • josch/reform-boundary-uboot
  • jacqueline/reform-boundary-uboot
  • cinap_lenrek/reform-boundary-uboot
  • jackhumbert/reform-boundary-uboot
  • sevan/reform-boundary-uboot
  • khm/reform-boundary-uboot
7 results
Show changes
Commits on Source (36054)
35,954 additional commits have been omitted to prevent performance issues.
Hide whitespace changes
Inline Side-by-side
Showing
with 1878 additions and 878 deletions
.checkpatch.conf
View file @ 8e809399
......@@ -12,3 +12,19 @@
# For min/max
--ignore MINMAX
# enable more tests
--strict
# Not Linux, so we don't recommend usleep_range() over udelay()
--ignore USLEEP_RANGE
# Ignore networking block comment style
--ignore NETWORKING_BLOCK_COMMENT_STYLE
# Ignore "WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet
# addresses are __aligned(2)".
--ignore PREFER_ETHER_ADDR_COPY
# A bit shorter of a description is OK with us.
--min-conf-desc-length=2
.gitignore
View file @ 8e809399
......@@ -3,54 +3,62 @@
# subdirectories here. Add them in the ".gitignore" file
# in that subdirectory instead.
#
# Normal rules
# Normal rules (sorted alphabetically)
#
*.rej
*.orig
.*
*.a
*.bin
*.cfgtmp
*.dtb
*.dtb.S
*.elf
*.exe
*.gcda
*.gcno
*.i
*.lex.c
*.lst
*.mod.c
*.o
*.o.*
*.order
*.patch
*.s
*.su
*~
*.swp
*.patch
*.bin
*.tab.[ch]
# Build tree
/build-*
#
# Top-level generic files
#
/MLO
fit-dtb.blob
/MLO*
/SPL*
/System.map
/u-boot
/u-boot.hex
/u-boot.imx
/u-boot.map
/u-boot.srec
/u-boot.ldr
/u-boot.ldr.hex
/u-boot.ldr.srec
/u-boot.img
/u-boot.kwb
/u-boot.sha1
/u-boot.dis
/u-boot.lds
/u-boot.ubl
/u-boot.ais
/u-boot.dtb
/u-boot.sb
/u-boot*
/boards.cfg
#
# Generated files
# git files that we don't want to ignore even it they are dot-files
#
!.gitignore
!.mailmap
*.depend*
/LOG
/errlog
/reloc_off
#
# Generated files
#
/spl/
/tpl/
/defconfig
#
# Generated include files
#
/include/config/
/include/generated/
asm-offsets.s
# stgit generated dirs
patches-*
......@@ -71,7 +79,12 @@ cscope.*
/ctags
/etags
# OneNAND IPL files
/onenand_ipl/onenand-ipl*
/onenand_ipl/board/*/onenand*
/onenand_ipl/board/*/*.S
# gnu global files
GPATH
GRTAGS
GSYMS
GTAGS
*.orig
*~
\#*#
.gitlab-ci.yml 0 → 100644
View file @ 8e809399
image: debian:bullseye-slim
build:
script: |
apt-get update
apt-get --yes install --no-install-recommends gcc-aarch64-linux-gnu build-essential bison flex device-tree-compiler git
cp mntreform-config .config
./build.sh
if git describe >/dev/null 2>&1; then
grep --quiet --fixed-strings "EXTRAVERSION = \\ MNT\\ Reform\\ $(git describe --always --tags --abbrev=0)" Makefile
fi
mv flash.bin imx8mq-mnt-reform2-flash.bin
cp imx8mq-mnt-reform2-flash.bin imx8mq-mnt-reform2-hdmi-flash.bin
artifacts:
paths:
- "imx8mq-mnt-reform2-flash.bin"
- "imx8mq-mnt-reform2-hdmi-flash.bin"
.mailmap 0 → 100644
View file @ 8e809399
#
# This list is used by git-shortlog to fix a few botched name translations
# in the git archive, either because the author's full name was messed up
# and/or not always written the same way, making contributions from the
# same person appearing not to be so or badly displayed.
#
# This file can be modified by hand or updated by the following command:
# scripts/mailmapper > tmp; mv tmp .mailmap
#
Allen Martin <amartin@nvidia.com>
Andreas Bießmann <andreas.devel@googlemail.com>
Andreas Bießmann <andreas@biessmann.org>
Aneesh V <aneesh@ti.com>
Dirk Behme <dirk.behme@googlemail.com>
Fabio Estevam <fabio.estevam@nxp.com>
Jagan Teki <402jagan@gmail.com>
Jagan Teki <jaganna@gmail.com>
Jagan Teki <jaganna@xilinx.com>
Jagan Teki <jagannadh.teki@gmail.com>
Jagan Teki <jagannadha.sutradharudu-teki@xilinx.com>
Markus Klotzbuecher <mk@denx.de>
Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
Prabhakar Kushwaha <prabhakar@freescale.com>
Rajeshwari Shinde <rajeshwari.s@samsung.com>
Ricardo Ribalda <ricardo.ribalda@uam.es>
Ricardo Ribalda <ricardo.ribalda@gmail.com>
Sandeep Paulraj <s-paulraj@ti.com>
Shaohui Xie <Shaohui.Xie@freescale.com>
Stefan Roese <stroese>
Stefano Babic <sbabic@denx.de>
TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Wolfgang Denk <wdenk>
York Sun <yorksun@freescale.com>
York Sun <york.sun@nxp.com>
Łukasz Majewski <l.majewski@samsung.com>
.travis.yml 0 → 100644
View file @ 8e809399
# SPDX-License-Identifier: GPL-2.0+
# Copyright Roger Meier <r.meier@siemens.com>
# build U-Boot on Travis CI - https://travis-ci.org/
sudo: required
dist: trusty
language: c
addons:
apt:
packages:
- cppcheck
- sloccount
- sparse
- bc
- build-essential
- libsdl1.2-dev
- python
- python-virtualenv
- swig
- libpython-dev
- iasl
- grub-efi-ia32-bin
- rpm2cpio
- wget
- device-tree-compiler
- lzop
before_install:
- sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y
- sudo apt-get update -q
- sudo apt-get install libisl15 -y
install:
# Clone uboot-test-hooks
- git clone --depth=1 git://github.com/swarren/uboot-test-hooks.git /tmp/uboot-test-hooks
- ln -s travis-ci /tmp/uboot-test-hooks/bin/`hostname`
- ln -s travis-ci /tmp/uboot-test-hooks/py/`hostname`
# prepare buildman environment
- echo -e "[toolchain]\nroot = /usr" > ~/.buildman
- echo -e "arc = /tmp/arc_gnu_2017.09_prebuilt_uclibc_le_archs_linux_install" >> ~/.buildman
- echo -e "\n[toolchain-alias]\nsh = sh2\n" >> ~/.buildman
- cat ~/.buildman
- virtualenv /tmp/venv
- . /tmp/venv/bin/activate
- pip install pytest
- grub-mkimage -o ~/grub_x86.efi -O i386-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
- mkdir ~/grub2-arm
- ( cd ~/grub2-arm; wget -O - http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/repo/oss/suse/armv7hl/grub2-arm-efi-2.02~beta2-87.1.armv7hl.rpm | rpm2cpio | cpio -di )
- mkdir ~/grub2-arm64
- ( cd ~/grub2-arm64; wget -O - http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/repo/oss/suse/aarch64/grub2-arm64-efi-2.02~beta2-87.1.aarch64.rpm | rpm2cpio | cpio -di )
env:
global:
- PATH=/tmp/qemu-install/bin:/tmp/uboot-test-hooks/bin:/usr/bin:/bin
- PYTHONPATH=/tmp/uboot-test-hooks/py/travis-ci
- BUILD_DIR=build
- HOSTCC="cc"
- HOSTCXX="c++"
before_script:
# install toolchains based on TOOLCHAIN} variable
- if [[ "${TOOLCHAIN}" == *m68k* ]]; then ./tools/buildman/buildman --fetch-arch m68k ; fi
- if [[ "${TOOLCHAIN}" == *microblaze* ]]; then ./tools/buildman/buildman --fetch-arch microblaze ; fi
- if [[ "${TOOLCHAIN}" == *mips* ]]; then ./tools/buildman/buildman --fetch-arch mips ; fi
- if [[ "${TOOLCHAIN}" == *or32* ]]; then ./tools/buildman/buildman --fetch-arch or32 ; fi
- if [[ "${TOOLCHAIN}" == *sh* ]]; then ./tools/buildman/buildman --fetch-arch sh2 ; fi
- if [[ "${TOOLCHAIN}" == *x86_64* ]]; then
./tools/buildman/buildman --fetch-arch x86_64;
echo -e "\n[toolchain-prefix]\nx86 = ${HOME}/.buildman-toolchains/gcc-7.3.0-nolibc/x86_64-linux/bin/x86_64-linux-" >> ~/.buildman;
fi
- if [[ "${TOOLCHAIN}" == arc ]]; then
wget https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2017.09-release/arc_gnu_2017.09_prebuilt_uclibc_le_archs_linux_install.tar.gz &&
tar -C /tmp -xf arc_gnu_2017.09_prebuilt_uclibc_le_archs_linux_install.tar.gz;
fi
- if [[ "${TOOLCHAIN}" == *xtensa* ]]; then
wget https://github.com/foss-xtensa/toolchain/releases/download/2018.02/x86_64-2018.02-${TOOLCHAIN}.tar.gz &&
tar -C /tmp -xf x86_64-2018.02-${TOOLCHAIN}.tar.gz &&
echo -e "\n[toolchain-prefix]\nxtensa = /tmp/2018.02/${TOOLCHAIN}/bin/${TOOLCHAIN}-" >> ~/.buildman;
fi
# If TOOLCHAIN is unset, we're on some flavour of ARM.
- if [[ "${TOOLCHAIN}" == "" ]]; then
./tools/buildman/buildman --fetch-arch arm &&
./tools/buildman/buildman --fetch-arch aarch64;
fi
- if [[ "${TOOLCHAIN}" == "powerpc" ]]; then ./tools/buildman/buildman --fetch-arch powerpc; fi
- if [[ "${TOOLCHAIN}" == "riscv" ]]; then
wget https://github.com/andestech/prebuilt/releases/download/20180530/riscv64-unknown-linux-gnu.tar.gz &&
tar -C /tmp -xf riscv64-unknown-linux-gnu.tar.gz &&
echo -e "\n[toolchain-prefix]\nriscv = /tmp/riscv64-unknown-linux-gnu/bin/riscv64-unknown-linux-gnu-" >> ~/.buildman;
fi
- if [[ "${QEMU_TARGET}" != "" ]]; then
git clone git://git.qemu.org/qemu.git /tmp/qemu;
pushd /tmp/qemu;
git submodule update --init dtc &&
git checkout v2.8.0-rc3 &&
./configure --prefix=/tmp/qemu-install --target-list=${QEMU_TARGET} &&
make -j4 all install;
popd;
fi
script:
# Comments must be outside the command strings below, or the Travis parser
# will get confused.
#
# Exit code 129 means warnings only.
- if [[ "${BUILDMAN}" != "" ]]; then
ret=0;
tools/buildman/buildman -P -E ${BUILDMAN} || ret=$?;
if [[ $ret -ne 0 && $ret -ne 129 ]]; then
tools/buildman/buildman -sdeP ${BUILDMAN};
exit $ret;
fi;
fi
# "not a_test_which_does_not_exist" is a dummy -k parameter which will
# never prevent any test from running. That way, we can always pass
# "-k something" even when $TEST_PY_TEST_SPEC doesnt need a custom
# value.
- export UBOOT_TRAVIS_BUILD_DIR=`cd .. && pwd`/.bm-work/${TEST_PY_BD};
cp ~/grub_x86.efi $UBOOT_TRAVIS_BUILD_DIR/;
cp ~/grub2-arm/usr/lib/grub2/arm-efi/grub.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm.efi;
cp ~/grub2-arm64/usr/lib/grub2/arm64-efi/grub.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm64.efi;
if [[ "${TEST_PY_BD}" != "" ]]; then
./test/py/test.py --bd ${TEST_PY_BD} ${TEST_PY_ID}
-k "${TEST_PY_TEST_SPEC:-not a_test_which_does_not_exist}"
--build-dir "$UBOOT_TRAVIS_BUILD_DIR";
ret=$?;
if [[ $ret -ne 0 ]]; then
exit $ret;
fi;
fi;
if [[ -n "${TEST_PY_TOOLS}" ]]; then
PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"
PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}"
./tools/binman/binman -t &&
./tools/patman/patman --test &&
./tools/buildman/buildman -t &&
PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"
PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}"
./tools/dtoc/dtoc -t;
fi
matrix:
include:
# we need to build by vendor due to 50min time limit for builds
# each env setting here is a dedicated build
- env:
- BUILDMAN="arc"
TOOLCHAIN="arc"
- env:
- BUILDMAN="arm11 arm7 arm920t arm946es"
- env:
- JOB="arm926ejs"
BUILDMAN="arm926ejs -x mx,siemens,atmel"
- env:
- BUILDMAN="atmel"
- env:
BUILDMAN="boundary engicam toradex"
- env:
- JOB="Freescale ARM32"
BUILDMAN="freescale -x powerpc,m68k,aarch64"
- env:
- JOB="Freescale AArch64"
BUILDMAN="freescale&aarch64"
- env:
- JOB="i.MX6 (non-Freescale)"
BUILDMAN="mx6 -x freescale,toradex,boundary,engicam"
- env:
- JOB="i.MX (non-Freescale, non-i.MX6)"
BUILDMAN="mx -x freescale,mx6,toradex"
- env:
- BUILDMAN="k2"
- env:
- BUILDMAN="samsung socfpga"
- env:
- BUILDMAN="sun4i"
- env:
- BUILDMAN="sun5i"
- env:
- BUILDMAN="sun6i"
- env:
- BUILDMAN="sun7i"
- env:
- BUILDMAN="sun8i"
- env:
- BUILDMAN="sun9i"
- env:
- BUILDMAN="sun50i"
- env:
- JOB="Catch-all ARM"
BUILDMAN="arm -x arm11,arm7,arm9,aarch64,atmel,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,xilinx"
- env:
- BUILDMAN="sandbox x86"
TOOLCHAIN="x86_64"
- env:
- BUILDMAN="kirkwood"
- env:
- BUILDMAN="mvebu"
- env:
- JOB="PXA"
- BUILDMAN="pxa -x toradex"
- env:
- BUILDMAN="m68k"
TOOLCHAIN="m68k"
- env:
- BUILDMAN="microblaze"
TOOLCHAIN="microblaze"
- env:
- BUILDMAN="mips"
TOOLCHAIN="mips"
- env:
- JOB="Non-Freescale PowerPC"
BUILDMAN="powerpc -x freescale"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="mpc85xx&freescale -x t208xrdb -x t4qds -x t102* -x p1_p2_rdb_pc -x p1010rdb -x corenet_ds -x b4860qds -x bsc91*"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="t208xrdb corenet_ds"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="t4qds b4860qds mpc83xx&freescale mpc86xx&freescale"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="t102*"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="p1_p2_rdb_pc"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="p1010rdb bsc91"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="siemens"
- env:
- JOB="tegra"
BUILDMAN="tegra -x toradex"
- env:
- JOB="am33xx"
BUILDMAN="am33xx -x siemens"
- env:
- BUILDMAN="omap"
- env:
- BUILDMAN="uniphier"
- env:
- JOB="Catch-all AArch64"
BUILDMAN="aarch64 -x tegra,freescale,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
- env:
- BUILDMAN="rockchip"
- env:
- JOB="sh"
BUILDMAN="sh -x arm"
TOOLCHAIN="sh"
- env:
- JOB="Xilinx (ARM)"
BUILDMAN="xilinx -x microblaze"
- env:
- BUILDMAN="xtensa"
TOOLCHAIN="xtensa-dc233c-elf"
- env:
- BUILDMAN="riscv"
TOOLCHAIN="riscv"
# QA jobs for code analytics
# static code analysis with cppcheck (we can add --enable=all later)
- env:
- JOB="cppcheck"
script:
- cppcheck --force --quiet --inline-suppr .
# search for TODO within source tree
- env:
- JOB="grep TODO"
script:
- grep -r TODO .
# search for FIXME within source tree
- env:
- JOB="grep FIXME HACK"
script:
- grep -r FIXME .
# search for HACK within source tree and ignore HACKKIT board
script:
- grep -r HACK . | grep -v HACKKIT
# some statistics about the code base
- env:
- JOB="sloccount"
script:
- sloccount .
# test/py
- env:
- TEST_PY_BD="sandbox"
BUILDMAN="^sandbox$"
TOOLCHAIN="x86_64"
- env:
- TEST_PY_BD="sandbox_spl"
TEST_PY_TEST_SPEC="test_ofplatdata"
BUILDMAN="^sandbox$"
TOOLCHAIN="x86_64"
TEST_PY_TOOLS="yes"
- env:
- TEST_PY_BD="sandbox_flattree"
BUILDMAN="^sandbox_flattree$"
TOOLCHAIN="x86_64"
- env:
- TEST_PY_BD="vexpress_ca15_tc2"
TEST_PY_ID="--id qemu"
QEMU_TARGET="arm-softmmu"
BUILDMAN="^vexpress_ca15_tc2$"
- env:
- TEST_PY_BD="vexpress_ca9x4"
TEST_PY_ID="--id qemu"
QEMU_TARGET="arm-softmmu"
BUILDMAN="^vexpress_ca9x4$"
- env:
- TEST_PY_BD="integratorcp_cm926ejs"
TEST_PY_TEST_SPEC="not sleep"
TEST_PY_ID="--id qemu"
QEMU_TARGET="arm-softmmu"
BUILDMAN="^integratorcp_cm926ejs$"
- env:
- TEST_PY_BD="qemu_arm"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="arm-softmmu"
BUILDMAN="^qemu_arm$"
- env:
- TEST_PY_BD="qemu_arm64"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="aarch64-softmmu"
BUILDMAN="^qemu_arm64$"
- env:
- TEST_PY_BD="qemu_mips"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="mips-softmmu"
BUILDMAN="^qemu_mips$"
TOOLCHAIN="mips"
- env:
- TEST_PY_BD="qemu_mipsel"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="mipsel-softmmu"
BUILDMAN="^qemu_mipsel$"
TOOLCHAIN="mips"
- env:
- TEST_PY_BD="qemu_mips64"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="mips64-softmmu"
BUILDMAN="^qemu_mips64$"
TOOLCHAIN="mips"
- env:
- TEST_PY_BD="qemu_mips64el"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="mips64el-softmmu"
BUILDMAN="^qemu_mips64el$"
TOOLCHAIN="mips"
- env:
- TEST_PY_BD="qemu-ppce500"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="ppc-softmmu"
BUILDMAN="^qemu-ppce500$"
TOOLCHAIN="powerpc"
- env:
- TEST_PY_BD="qemu-x86"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="i386-softmmu"
BUILDMAN="^qemu-x86$"
TOOLCHAIN="x86_64"
BUILD_ROM="yes"
- env:
- TEST_PY_BD="zynq_zc702"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="arm-softmmu"
TEST_PY_ID="--id qemu"
BUILDMAN="^zynq_zc702$"
- env:
- TEST_PY_BD="xtfpga"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="xtensa-softmmu"
TEST_PY_ID="--id qemu"
BUILDMAN="^xtfpga$"
TOOLCHAIN="xtensa-dc233c-elf"
# TODO make it perfect ;-r
COPYING deleted 100644 → 0
View file @ f5766139
U-Boot is Free Software. It is copyrighted by Wolfgang Denk and
many others who contributed code (see the actual source code for
details). You can redistribute U-Boot and/or modify it under the
terms of version 2 of the GNU General Public License as published by
the Free Software Foundation. Most of it can also be distributed,
at your option, under any later version of the GNU General Public
License -- see individual files for exceptions.
NOTE! This license does *not* cover the so-called "standalone"
applications that use U-Boot services by means of the jump table
provided by U-Boot exactly for this purpose - this is merely
considered normal use of U-Boot, and does *not* fall under the
heading of "derived work".
The header files "include/image.h" and "include/asm-*/u-boot.h"
define interfaces to U-Boot. Including these (unmodified) header
files in another file is considered normal use of U-Boot, and does
*not* fall under the heading of "derived work".
Also note that the GPL below is copyrighted by the Free Software
Foundation, but the instance of code that it refers to (the U-Boot
source code) is copyrighted by me and others who actually wrote it.
-- Wolfgang Denk
=======================================================================
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
CREDITS deleted 100644 → 0
View file @ f5766139
#
# Parts of the development effort for this project have been
# sponsored by SIEMENS AG, Austria. Thanks to SIEMENS for
# supporting an Open Source project!
#
#
# This is at least a partial credits-file of individual people that
# have contributed to the U-Boot project. It is sorted by name and
# formatted to allow easy grepping and beautification by scripts.
# The fields are: name (N), email (E), web-address (W), PGP key ID
# and fingerprint (P), description (D), and snail-mail address (S).
# Thanks,
#
# Wolfgang Denk
#----------
N: Dr. Bruno Achauer
E: bruno@exet-ag.de
D: Support for NetBSD (both as host and target system)
N: Guillaume Alexandre
E: guillaume.alexandre@gespac.ch
D: Add PCIPPC6 configuration
N: Pantelis Antoniou
E: panto@intracom.gr
D: NETVIA & NETPHONE board support, ARTOS support.
D: Support for Silicon Turnkey eXpress XTc
N: Pierre Aubert
E: <p.aubert@staubli.com>
D: Support for RPXClassic board
N: Yuli Barcohen
E: yuli@arabellasw.com
D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
D: Support for Zephyr Engineering ZPC.1900 board.
D: Support for Interphase iSPAN boards.
D: Support for Analogue&Micro Adder boards.
D: Support for Analogue&Micro Rattler boards.
W: http://www.arabellasw.com
N: Jerry van Baren
E: <vanbaren@cideas.com>
D: BedBug port to 603e core (MPC82xx). Code for enhanced memory test.
N: Pavel Bartusek
E: <pba@sysgo.com>
D: Reiserfs support
W: http://www.elinos.com
N: Andre Beaudin
E: <andre.beaudin@colubris.com>
D: PCMCIA, Ethernet, TFTP
N: Jon Benediktsson
E: jonb@marel.is
D: Support for Marel V37 board
N: Raphael Bossek
E: raphael.bossek@solutions4linux.de
D: 8xxrom-0.3.0
N: Cliff Brake
E: cliff.brake@gmail.com
D: Port to Vibren PXA255 IDP platform
W: http://www.vibren.com
W: http://bec-systems.com
N: Rick Bronson
E: rick@efn.org
D: Atmel AT91RM9200DK and NAND support
N: David Brown
E: DBrown03@harris.com
D: Extensions to 8xxrom-0.3.0
N: Oliver Brown
E: obrown@adventnetworks.com
D: Port to the gw8260 board
N: Curt Brune
E: curt@cucy.com
D: Added support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
W: http://www.cucy.com
N: Jonathan De Bruyne
E: jonathan.debruyne@siemens.atea.be
D: Port to Siemens IAD210 board
N: Ken Chou
E: kchou@ieee.org
D: Support for A3000 SBC board
N: Conn Clark
E: clark@esteem.com
D: ESTEEM192E support
N: Magnus Damm
E: damm@opensource.se
D: 8xxrom
N: Richard Danter
E: richard.danter@windriver.com
D: Support for Wind River PPMC 7xx/74xx boards
N: George G. Davis
E: gdavis@mvista.com
D: Board ports for ADS GraphicsClient+ and Intel Assabet
N: Arun Dharankar
E: ADharankar@ATTBI.Com
D: threads / scheduler example code
N: K?ri Dav??sson
E: kd@flaga.is
D: FLAGA DM Support
N: Wolfgang Denk
E: wd@denx.de
D: U-Boot initial version, continuing maintenance, ARMBoot merge
W: http://www.denx.de
N: Dan A. Dickey
E: ddickey@charter.net
D: FADS Support
N: James F. Dougherty
E: jfd@GigabitNetworks.COM
D: Port to the MOUSSE board
N: Dave Ellis
E: DGE@sixnetio.com
D: EEPROM Speedup, SXNI855T port
N: Daniel Engstr?m
E: daniel@omicron.se
D: x86 port, Support for sc520_cdp board
N: Hayden Fraser
E: Hayden.Fraser@freescale.com
D: Support for ColdFire MCF5253
W: www.freescale.com
N: Dr. Wolfgang Grandegger
E: wg@denx.de
D: Support for Interphase 4539 T1/E1/J1 PMC, PN62, CCM, SCM boards
W: www.denx.de
N: Peter Figuli
E: peposh@etc.sk
D: Support for WEP EP250 (PXA) board
N: Thomas Frieden
E: ThomasF@hyperion-entertainment.com
D: Support for AmigaOne
N: Paul Gortmaker
E: paul.gortmaker@windriver.com
D: Support for WRS SBC8347/8349 boards
N: Frank Gottschling
E: fgottschling@eltec.de
D: Support for ELTEC MHPC/ELPPC boards, cfb-console, i8042, SMI LynxEM
W: www.eltec.de
N: Marius Groeger
E: mgroeger@sysgo.de
D: MBX Support, board specific function interface, EST SBC8260 support; initial support for StrongARM (LART), ARM720TDMI (implementa A7)
W: www.elinos.com
N: Kirk Haderlie
E: khaderlie@vividimage.com
D: Added TFTP to 8xxrom (-> 0.3.1)
N: Chris Hallinan
E: clh@net1plus.com
D: DHCP Support
N: Anne-Sophie Harnois
E: Anne-Sophie.Harnois@nextream.fr
D: Port to Walnut405 board
N: Andreas Heppel
E: aheppel@sysgo.de
D: CPU Support for MPC 75x
N: Josh Huber
E: huber@alum.wpi.edu
D: Port to the Galileo Evaluation Board, and the MPC74xx cpu series.
W: http://www.mclx.com/
H: Stuart Hughes
E: stuarth@lineo.com
D: Port to MPC8260ADS board
H: Rich Ireland
E: r.ireland@computer.org
D: FPGA device configuration driver
H: Mark Jackson
E: mpfj@mimc.co.uk
D: Port to MIMC200 board
N: Gary Jennejohn
E: garyj@jennejohn.org
D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
W: www.denx.de
N: Murray Jensen
E: Murray.Jensen@csiro.au
D: Initial 8260 support; GDB support
D: Port to Cogent+Hymod boards; Hymod Board Database
N: Yoo. Jonghoon
E: yooth@ipone.co.kr
D: Added port to the RPXlite board
N: Mark Jonas
E: mark.jonas@freescale.com
D: Support for Freescale Total5200 platform
W: http://www.mobilegt.com/
N: Mark Jonas
E: mark.jonas@de.bosch.com
D: Support for MPR2 board
N: Sam Song
E: samsongshu@yahoo.com.cn
D: Port to the RPXlite_DW board
N: Brad Kemp
E: Brad.Kemp@seranoa.com
D: Port to Windriver ppmc8260 board
N: Sangmoon Kim
E: dogoil@etinsys.com
D: Support for debris board
D: Support for KVME080 board
N: Frederick W. Klatt
E: fred.klatt@windriver.com
D: Support for Wind River SBC8540/SBC8560 boards
N: Thomas Koeller
E: tkoeller@gmx.net
D: Port to Motorola Sandpoint 3 (MPC8240)
N: Raghu Krishnaprasad
E: Raghu.Krishnaprasad@fci.com
D: Support for Adder-II MPC852T evaluation board
W: http://www.forcecomputers.com
N: Sergey Kubushyn
E: ksi@koi8.net
D: Support for various TI DaVinci based boards.
N: Bernhard Kuhn
E: bkuhn@metrowerks.com
D Support for Coldfire CPU; Support for Motorola M5272C3 and M5282EVB boards
N: Prakash Kumar
E: prakash@embedx.com
D Support for Intrinsyc CERF PXA250 board.
N: Thomas Lange
E: thomas@corelatus.se
D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes
N: The LEOX team
E: team@leox.org
D: Support for LEOX boards, DS164x RTC
W: http://www.leox.org
N: TsiChung Liew
E: Tsi-Chung.Liew@freescale.com
D: Support for ColdFire MCF523x, MCF532x, MCF5445x, MCF547x_8x
W: www.freescale.com
N: Leif Lindholm
E: leif.lindholm@i3micro.com
D: Support for AMD dbau1550 board.
N: Stephan Linz
E: linz@li-pro.net
D: Support for Nios Stratix Development Kit (DK-1S10)
D: Support for SSV ADNP/ESC1 (Nios Cyclone)
W: http://www.li-pro.net
N: Dave Liu
E: daveliu@freescale.com
D: Support for MPC8315, MPC832x, MPC8360, MPC837x
W: www.freescale.com
N: Raymond Lo
E: lo@routefree.com
D: Support for DOS partitions
N: James MacAulay
E: james.macaulay@amirix.com
D: Suppport for Amirix AP1000
W: www.amirix.com
N: Dan Malek
E: dan@embeddedalley.com
D: FADSROM, the grandfather of all of this
D: Support for Silicon Turnkey eXpress XTc
N: Andrea "llandre" Marson
E: andrea.marson@dave-tech.it
D: Port to PPChameleonEVB board
W: www.dave-tech.it
N: Reinhard Meyer
E: r.meyer@emk-elektronik.de
D: Port to EMK TOP860 Module
N: Jay Monkman
E: jtm@smoothsmoothie.com
D: EST SBC8260 support
N: Frank Morauf
E: frank.morauf@salzbrenner.com
D: Support for Embedded Planet RPX Super Board
N: David M?ller
E: d.mueller@elsoft.ch
D: Support for Samsung ARM920T SMDK2410 eval board
N: Scott McNutt
E: smcnutt@psyent.com
D: Support for Altera Nios-32 CPU
D: Support for Altera Nios-II CPU
D: Support for Nios Cyclone Development Kit (DK-1C20)
W: http://www.psyent.com
N: Rolf Offermanns
E: rof@sysgo.de
D: Initial support for SSV-DNP1110, SMC91111 driver
W: www.elinos.com
N: John Otken
E: jotken@softadvances.com
D: Support for AMCC Luan 440SP board
N: Tolunay Orkun
E: torkun@nextio.com
D: Support for Cogent CSB272 & CSB472 boards
N: Keith Outwater
E: keith_outwater@mvis.com
D: Support for generic/custom MPC860T boards (GEN860T, GEN860T_SC)
N: Frank Panno
E: fpanno@delphintech.com
D: Support for Embedded Planet EP8260 Board
N: Denis Peter
E: d.peter@mpl.ch
D: Support for 4xx SCSI, floppy, CDROM, CT69000 video, ...
D: Support for PIP405 board
D: Support for MIP405 board
N: Dave Peverley
E: dpeverley@mpc-data.co.uk
W: http://www.mpc-data.co.uk
D: OMAP730 P2 board support
N: Bill Pitts
E: wlp@mindspring.com
D: BedBug embedded debugger code
N: Daniel Poirot
E: dan.poirot@windriver.com
D: Support for the Wind River sbc405, sbc8240 board
W: http://www.windriver.com
N: Stelian Pop
E: stelian@popies.net
D: Atmel AT91CAP9ADK support
N: Ricardo Ribalda Delgado
E: ricardo.ribalda@uam.es
D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval
D: Virtex ppc440 generic architecture
D: Virtex ppc405 generic architecture
W: http://www.ii.uam.es/~rribalda
N: Stefan Roese
E: sr@denx.de
D: AMCC PPC4xx Support
W: http://www.denx.de
N: Erwin Rol
E: erwin@muffin.org
D: boot support for RTEMS
N: Paul Ruhland
E: pruhland@rochester.rr.com
D: Port to Logic Zoom LH7A40x SDK board(s)
N: Neil Russell
E: caret@c-side.com
D: Author of LiMon-1.4.2, which contributed some ideas
N: Travis B. Sawyer
E: travis.sawyer@sandburst.com
D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board. AMCC 440gx Ref Platform (Ocotea)
N: Paolo Scaffardi
E: arsenio@tin.it
D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
N: Andre Schwarz
E: andre.schwarz@matrix-vision.de
D: Support for Matrix Vision boards (MVBLM7/MVBC_P/MVSMR)
N: Robert Schwebel
E: r.schwebel@pengutronix.de
D: Support for csb226 and innokom boards (PXA2xx)
N: Aaron Sells
E: sellsa@embeddedplanet.com
D: Support for EP82xxM
N: Art Shipkowski
E: art@videon-central.com
D: Support for NetSilicon NS7520
D: Support for ColdFire MCF5275
N: Michal Simek
E: monstr@monstr.eu
D: Support for Microblaze, ML401, XUPV2P board
W: www.monstr.eu
N: Yasushi Shoji
E: yashi@atmark-techno.com
D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board
N: Kurt Stremerch
E: kurt@exys.be
D: Support for Exys XSEngine board
N: Andrea Scian
E: andrea.scian@dave-tech.it
D: Port to B2 board
W: www.dave-tech.it
N: Timur Tabi
E: timur@freescale.com
D: Support for MPC8349E-mITX
W: www.freescale.com
N: Rob Taylor
E: robt@flyingpig.com
D: Port to MBX860T and Sandpoint8240
N: Erik Theisen
E: etheisen@mindspring.com
D: MBX8xx and many other patches
N: Jim Thompson
E: jim@musenki.com
D: Support for MUSENKI board
N: Rune Torgersen
E: <runet@innovsys.com>
D: Support for Motorola MPC8266ADS board
N: Greg Ungerer
E: greg.ungerer@opengear.com
D: Support for ks8695 CPU, and OpenGear cmXXXX boards
N: David Updegraff
E: dave@cray.com
D: Port to Cray L1 board; DHCP vendor extensions
N: Christian Vejlbo
E: christian.vejlbo@tellabs.com
D: FADS860T ethernet support
N: Robert Whaley
E: rwhaley@applieddata.net
D: Port to ARM PXA27x adsvix SBC
N: Martin Winistoerfer
E: martinwinistoerfer@gmx.ch
D: Port to MPC555/556 microcontrollers and support for cmi board
N: David Wu
E: support@arcturusnetworks.com
D: Mercury Security EP2500
W: http://www.arcturusnetworks.com
N: Ming-Len Wu
E: minglen_wu@techware.com.tw
D: Motorola MX1ADS board support
W: http://www.techware.com.tw/
N: Xianghua Xiao
E: x.xiao@motorola.com
D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.
N: John Zhan
E: zhanz@sinovee.com
D: Support for SinoVee Microsystems SC8xx SBC
N: Alex Zuepke
E: azu@sysgo.de
D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
W: www.elinos.com
N: Nobuhiro Iwamatsu
E: iwamatsu@nigauri.org
D: Support for SuperH, MS7750SE01 and MS7722SE01 boards.
W: http://www.nigauri.org/~iwamatsu/
N: Alan Lu
E: alnalu001@gmail.com
D: Support for Artila M-501 starter kit
W: http://www.artila.com/
N: Kimmo Leppala
E: kimmo.leppala@sysart.fi
D: Support for Artila M-501 starter kit
W: http://www.sysart.fi/
N: Timo Tuunainen
E: timo.tuunainen@sysart.fi
D: Support for Artila M-501 starter kit
W: http://www.sysart.fi/
N: Philip Balister
E: philip@opensdr.com
D: Port to Lyrtech SFFSDR development board.
W: www.opensdr.com
Documentation/devicetree/bindings/phy/no-op.txt 0 → 100644
View file @ 8e809399
NOP PHY driver
This driver is used to stub PHY operations in a driver (USB, SATA).
This is useful when the 'client' driver (USB, SATA, ...) uses the PHY framework
and there is no actual PHY harwdare to drive.
Required properties:
- compatible : must contain "nop-phy"
- #phy-cells : must contain <0>
Example:
nop_phy {
compatible = "nop-phy";
#phy-cells = <0>;
};
Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt 0 → 100644
View file @ 8e809399
STMicroelectronics STM32 USB HS PHY controller
The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
switch. It controls PHY configuration and status, and the UTMI+ switch that
selects either OTG or HOST controller for the second PHY port. It also sets
PLL configuration.
USBPHYC
|_ PLL
|
|_ PHY port#1 _________________ HOST controller
| _ |
| / 1|________________|
|_ PHY port#2 ----| |________________
| \_0| |
|_ UTMI switch_______| OTG controller
Phy provider node
=================
Required properties:
- compatible: must be "st,stm32mp1-usbphyc"
- reg: address and length of the usb phy control register set
- clocks: phandle + clock specifier for the PLL phy clock
- #address-cells: number of address cells for phys sub-nodes, must be <1>
- #size-cells: number of size cells for phys sub-nodes, must be <0>
Optional properties:
- assigned-clocks: phandle + clock specifier for the PLL phy clock
- assigned-clock-parents: the PLL phy clock parent
- resets: phandle + reset specifier
Required nodes: one sub-node per port the controller provides.
Phy sub-nodes
==============
Required properties:
- reg: phy port index
- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
see phy-bindings.txt in the same directory.
- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
port#1 and must be <1> for PHY port#2, to select USB controller
Example:
usbphyc: usb-phy@5a006000 {
compatible = "st,stm32mp1-usbphyc";
reg = <0x5a006000 0x1000>;
clocks = <&rcc_clk USBPHY_K>;
resets = <&rcc_rst USBPHY_R>;
#address-cells = <1>;
#size-cells = <0>;
usbphyc_port0: usb-phy@0 {
reg = <0>;
phy-supply = <&vdd_usb>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>
#phy-cells = <0>;
};
usbphyc_port1: usb-phy@1 {
reg = <1>;
phy-supply = <&vdd_usb>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>
#phy-cells = <1>;
};
};
Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt 0 → 100644
View file @ 8e809399
Broadcom STB wake-up Timer
The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
ability to wake up the system from low-power suspend/standby modes.
Required properties:
- compatible : should contain "brcm,brcmstb-waketimer"
- reg : the register start and length for the WKTMR block
- interrupts : The TIMER interrupt
- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2
interrupt controller node
- clocks : The phandle to the UPG fixed clock (27Mhz domain)
Example:
waketimer@f0411580 {
compatible = "brcm,brcmstb-waketimer";
reg = <0xf0411580 0x14>;
interrupts = <0x3>;
interrupt-parent = <&aon_pm_l2_intc>;
clocks = <&upg_fixed>;
};
Kbuild 0 → 100644
View file @ 8e809399
#
# Kbuild for top-level directory of U-Boot
# This file takes care of the following:
# 1) Generate generic-asm-offsets.h
# 2) Generate asm-offsets.h
# Default sed regexp - multiline due to syntax constraints
define sed-y
"s:[[:space:]]*\.ascii[[:space:]]*\"\(.*\)\":\1:; \
/^->/{s:->#\(.*\):/* \1 */:; \
s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:->::; p;}"
endef
# Use filechk to avoid rebuilds when a header changes, but the resulting file
# does not
define filechk_offsets
(set -e; \
echo "#ifndef $2"; \
echo "#define $2"; \
echo "/*"; \
echo " * DO NOT MODIFY."; \
echo " *"; \
echo " * This file was generated by Kbuild"; \
echo " */"; \
echo ""; \
sed -ne $(sed-y); \
echo ""; \
echo "#endif" )
endef
#####
# 1) Generate generic-asm-offsets.h
generic-offsets-file := include/generated/generic-asm-offsets.h
always := $(generic-offsets-file)
targets := lib/asm-offsets.s
# We use internal kbuild rules to avoid the "is up to date" message from make
lib/asm-offsets.s: lib/asm-offsets.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(generic-offsets-file): lib/asm-offsets.s FORCE
$(call filechk,offsets,__GENERIC_ASM_OFFSETS_H__)
#####
# 2) Generate asm-offsets.h
#
ifneq ($(wildcard $(srctree)/arch/$(ARCH)/lib/asm-offsets.c),)
offsets-file := include/generated/asm-offsets.h
endif
always += $(offsets-file)
targets += arch/$(ARCH)/lib/asm-offsets.s
CFLAGS_asm-offsets.o := -DDO_DEPS_ONLY
# We use internal kbuild rules to avoid the "is up to date" message from make
arch/$(ARCH)/lib/asm-offsets.s: arch/$(ARCH)/lib/asm-offsets.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(offsets-file): arch/$(ARCH)/lib/asm-offsets.s FORCE
$(call filechk,offsets,__ASM_OFFSETS_H__)
Kconfig 0 → 100644
View file @ 8e809399
#
# For a description of the syntax of this configuration file,
# see the file Documentation/kbuild/kconfig-language.txt in the
# Linux kernel source tree.
#
mainmenu "U-Boot $UBOOTVERSION Configuration"
config UBOOTVERSION
string
option env="UBOOTVERSION"
# Allow defaults in arch-specific code to override any given here
source "arch/Kconfig"
menu "General setup"
config BROKEN
bool
help
This option cannot be enabled. It is used as dependency
for broken and incomplete features.
config LOCALVERSION
string "Local version - append to U-Boot release"
help
Append an extra string to the end of your U-Boot version.
This will show up in your boot log, for example.
The string you set here will be appended after the contents of
any files with a filename matching localversion* in your
object and source tree, in that order. Your total string can
be a maximum of 64 characters.
config LOCALVERSION_AUTO
bool "Automatically append version information to the version string"
default y
help
This will try to automatically determine if the current tree is a
release tree by looking for Git tags that belong to the current
top of tree revision.
A string of the format -gxxxxxxxx will be added to the localversion
if a Git-based tree is found. The string generated by this will be
appended after any matching localversion* files, and after the value
set in CONFIG_LOCALVERSION.
(The actual string used here is the first eight characters produced
by running the command:
$ git rev-parse --verify HEAD
which is done within the script "scripts/setlocalversion".)
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size"
default y
help
Enabling this option will pass "-Os" instead of "-O2" to gcc
resulting in a smaller U-Boot image.
This option is enabled by default for U-Boot.
config CC_COVERAGE
bool "Enable code coverage analysis"
depends on SANDBOX
help
Enabling this option will pass "--coverage" to gcc to compile
and link code instrumented for coverage analysis.
config DISTRO_DEFAULTS
bool "Select defaults suitable for booting general purpose Linux distributions"
imply USE_BOOTCOMMAND
select CMD_BOOTZ if ARM && !ARM64
select CMD_BOOTI if ARM64
select CMD_DHCP if CMD_NET
select CMD_PING if CMD_NET
select CMD_PXE if NET
select CMD_ENV_EXISTS
select CMD_EXT2
select CMD_EXT4
select CMD_FAT
select CMD_FS_GENERIC
imply CMD_MII if NET
select CMD_PART if PARTITIONS
select HUSH_PARSER
select CMDLINE_EDITING
select AUTO_COMPLETE
select SYS_LONGHELP
select SUPPORT_RAW_INITRD
select ENV_VARS_UBOOT_CONFIG
help
Select this to enable various options and commands which are suitable
for building u-boot for booting general purpose Linux distributions.
config ENV_VARS_UBOOT_CONFIG
bool "Add arch, board, vendor and soc variables to default environment"
help
Define this in order to add variables describing the
U-Boot build configuration to the default environment.
These will be named arch, cpu, board, vendor, and soc.
Enabling this option will cause the following to be defined:
- CONFIG_SYS_ARCH
- CONFIG_SYS_CPU
- CONFIG_SYS_BOARD
- CONFIG_SYS_VENDOR
- CONFIG_SYS_SOC
config NR_DRAM_BANKS
int "Number of DRAM banks"
default 4
help
This defines the number of DRAM banks.
config SYS_BOOT_GET_CMDLINE
bool "Enable kernel command line setup"
help
Enables allocating and saving kernel cmdline in space between
"bootm_low" and "bootm_low" + BOOTMAPSZ.
config SYS_BOOT_GET_KBD
bool "Enable kernel board information setup"
help
Enables allocating and saving a kernel copy of the bd_info in
space between "bootm_low" and "bootm_low" + BOOTMAPSZ.
config SYS_MALLOC_F
bool "Enable malloc() pool before relocation"
default y if DM
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config SYS_MALLOC_F_LEN
hex "Size of malloc() pool before relocation"
depends on SYS_MALLOC_F
default 0x1000 if AM33XX
default 0x400
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config SPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in SPL before relocation"
depends on SYS_MALLOC_F
default SYS_MALLOC_F_LEN
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config TPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in TPL before relocation"
depends on SYS_MALLOC_F
default SYS_MALLOC_F_LEN
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y
help
This option allows certain base U-Boot options and settings
to be disabled or tweaked. This is for specialized
environments which can tolerate a "non-standard" U-Boot.
Use this only if you really know what you are doing.
if EXPERT
config SYS_MALLOC_CLEAR_ON_INIT
bool "Init with zeros the memory reserved for malloc (slow)"
default y
help
This setting is enabled by default. The reserved malloc
memory is initialized with zeros, so first malloc calls
will return the pointer to the zeroed memory. But this
slows the boot time.
It is recommended to disable it, when CONFIG_SYS_MALLOC_LEN
value, has more than few MiB, e.g. when uses bzip2 or bmp logo.
Then the boot time can be significantly reduced.
Warning:
When disabling this, please check if malloc calls, maybe
should be replaced by calloc - if one expects zeroed memory.
config TOOLS_DEBUG
bool "Enable debug information for tools"
help
Enable generation of debug information for tools such as mkimage.
This can be used for debugging purposes. With debug information
it is possible to set breakpoints on particular lines, single-step
debug through the source code, etc.
endif # EXPERT
config PHYS_64BIT
bool "64bit physical address support"
help
Say Y here to support 64bit physical memory address.
This can be used not only for 64bit SoCs, but also for
large physical address extention on 32bit SoCs.
config BUILD_ROM
bool "Build U-Boot as BIOS replacement"
depends on X86
help
This option allows to build a ROM version of U-Boot.
The build process generally requires several binary blobs
which are not shipped in the U-Boot source tree.
Please, see doc/README.x86 for details.
endmenu # General setup
menu "Boot images"
config ANDROID_BOOT_IMAGE
bool "Enable support for Android Boot Images"
default y if FASTBOOT
help
This enables support for booting images which use the Android
image format header.
config FIT
bool "Support Flattened Image Tree"
select MD5
select SHA1
help
This option allows you to boot the new uImage structure,
Flattened Image Tree. FIT is formally a FDT, which can include
images of various types (kernel, FDT blob, ramdisk, etc.)
in a single blob. To boot this new uImage structure,
pass the address of the blob to the "bootm" command.
FIT is very flexible, supporting compression, multiple images,
multiple configurations, verification through hashing and also
verified boot (secure boot using RSA).
if FIT
config FIT_ENABLE_SHA256_SUPPORT
bool "Support SHA256 checksum of FIT image contents"
select SHA256
default y
help
Enable this to support SHA256 checksum of FIT image contents. A
SHA256 checksum is a 256-bit (32-byte) hash value used to check that
the image contents have not been corrupted. SHA256 is recommended
for use in secure applications since (as at 2016) there is no known
feasible attack that could produce a 'collision' with differing
input data. Use this for the highest security. Note that only the
SHA256 variant is supported: SHA512 and others are not currently
supported in U-Boot.
config FIT_SIGNATURE
bool "Enable signature verification of FIT uImages"
depends on DM
select RSA
select HASH
help
This option enables signature verification of FIT uImages,
using a hash signed and verified using RSA. If
CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
hashing is available using hardware, then the RSA library will use
it. See doc/uImage.FIT/signature.txt for more details.
WARNING: When relying on signed FIT images with a required signature
check the legacy image format is disabled by default, so that
unsigned images cannot be loaded. If a board needs the legacy image
format support in this case, enable it using
CONFIG_IMAGE_FORMAT_LEGACY.
config FIT_VERBOSE
bool "Show verbose messages when FIT images fail"
help
Generally a system will have valid FIT images so debug messages
are a waste of code space. If you are debugging your images then
you can enable this option to get more verbose information about
failures.
config FIT_BEST_MATCH
bool "Select the best match for the kernel device tree"
help
When no configuration is explicitly selected, default to the
one whose fdt's compatibility field best matches that of
U-Boot itself. A match is considered "best" if it matches the
most specific compatibility entry of U-Boot's fdt's root node.
The order of entries in the configuration's fdt is ignored.
config FIT_IMAGE_POST_PROCESS
bool "Enable post-processing of FIT artifacts after loading by U-Boot"
depends on TI_SECURE_DEVICE
help
Allows doing any sort of manipulation to blobs after they got extracted
from FIT images like stripping off headers or modifying the size of the
blob, verification, authentication, decryption etc. in a platform or
board specific way. In order to use this feature a platform or board-
specific implementation of board_fit_image_post_process() must be
provided. Also, anything done during this post-processing step would
need to be comprehended in how the images were prepared before being
injected into the FIT creation (i.e. the blobs would have been pre-
processed before being added to the FIT image).
if SPL
config SPL_FIT
bool "Support Flattened Image Tree within SPL"
depends on SPL
select SPL_OF_LIBFDT
config SPL_FIT_PRINT
bool "Support FIT printing within SPL"
depends on SPL_FIT
help
Support printing the content of the fitImage in a verbose manner in SPL.
config SPL_FIT_SIGNATURE
bool "Enable signature verification of FIT firmware within SPL"
depends on SPL_DM
select SPL_FIT
select SPL_RSA
config SPL_LOAD_FIT
bool "Enable SPL loading U-Boot as a FIT"
select SPL_FIT
help
Normally with the SPL framework a legacy image is generated as part
of the build. This contains U-Boot along with information as to
where it should be loaded. This option instead enables generation
of a FIT (Flat Image Tree) which provides more flexibility. In
particular it can handle selecting from multiple device tree
and passing the correct one to U-Boot.
config SPL_LOAD_FIT_FULL
bool "Enable SPL loading U-Boot as a FIT"
select SPL_FIT
help
Normally with the SPL framework a legacy image is generated as part
of the build. This contains U-Boot along with information as to
where it should be loaded. This option instead enables generation
of a FIT (Flat Image Tree) which provides more flexibility. In
particular it can handle selecting from multiple device tree
and passing the correct one to U-Boot.
config SPL_FIT_IMAGE_POST_PROCESS
bool "Enable post-processing of FIT artifacts after loading by the SPL"
depends on SPL_LOAD_FIT
help
Allows doing any sort of manipulation to blobs after they got extracted
from the U-Boot FIT image like stripping off headers or modifying the
size of the blob, verification, authentication, decryption etc. in a
platform or board specific way. In order to use this feature a platform
or board-specific implementation of board_fit_image_post_process() must
be provided. Also, anything done during this post-processing step would
need to be comprehended in how the images were prepared before being
injected into the FIT creation (i.e. the blobs would have been pre-
processed before being added to the FIT image).
config SPL_FIT_SOURCE
string ".its source file for U-Boot FIT image"
depends on SPL_FIT
help
Specifies a (platform specific) FIT source file to generate the
U-Boot FIT image. This could specify further image to load and/or
execute.
config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
passed a list of supported device tree file stub names to
include in the generated image.
endif # SPL
endif # FIT
config IMAGE_FORMAT_LEGACY
bool "Enable support for the legacy image format"
default y if !FIT_SIGNATURE
help
This option enables the legacy image format. It is enabled by
default for backward compatibility, unless FIT_SIGNATURE is
set where it is disabled so that unsigned images cannot be
loaded. If a board needs the legacy image format support in this
case, enable it here.
config OF_BOARD_SETUP
bool "Set up board-specific details in device tree before boot"
depends on OF_LIBFDT
help
This causes U-Boot to call ft_board_setup() before booting into
the Operating System. This function can set up various
board-specific information in the device tree for use by the OS.
The device tree is then passed to the OS.
config OF_SYSTEM_SETUP
bool "Set up system-specific details in device tree before boot"
depends on OF_LIBFDT
help
This causes U-Boot to call ft_system_setup() before booting into
the Operating System. This function can set up various
system-specific information in the device tree for use by the OS.
The device tree is then passed to the OS.
config OF_STDOUT_VIA_ALIAS
bool "Update the device-tree stdout alias from U-Boot"
depends on OF_LIBFDT
help
This uses U-Boot's serial alias from the aliases node to update
the device tree passed to the OS. The "linux,stdout-path" property
in the chosen node is set to point to the correct serial node.
This option currently references CONFIG_CONS_INDEX, which is
incorrect when used with device tree as this option does not
exist / should not be used.
config SYS_EXTRA_OPTIONS
string "Extra Options (DEPRECATED)"
help
The old configuration infrastructure (= mkconfig + boards.cfg)
provided the extra options field. If you have something like
"HAS_BAR,BAZ=64", the optional options
#define CONFIG_HAS
#define CONFIG_BAZ 64
will be defined in include/config.h.
This option was prepared for the smooth migration from the old
configuration to Kconfig. Since this option will be removed sometime,
new boards should not use this option.
config SYS_TEXT_BASE
depends on !NIOS2 && !XTENSA
depends on !EFI_APP
default 0x80800000 if ARCH_OMAP2PLUS
default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S
hex "Text Base"
help
The address in memory that U-Boot will be running from, initially.
config SYS_CLK_FREQ
depends on ARC || ARCH_SUNXI
int "CPU clock frequency"
help
TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture
config ARCH_FIXUP_FDT_MEMORY
bool "Enable arch_fixup_memory_banks() call"
default y
help
Enable FDT memory map syncup before OS boot. This feature can be
used for booting OS with different memory setup where the part of
the memory location should be used for different purpose.
endmenu # Boot images
source "api/Kconfig"
source "common/Kconfig"
source "cmd/Kconfig"
source "disk/Kconfig"
source "dts/Kconfig"
source "env/Kconfig"
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "lib/Kconfig"
source "test/Kconfig"
Licenses/Exceptions 0 → 100644
View file @ 8e809399
GPL License Exception:
Even though U-Boot in general is covered by the GPL-2.0/GPL-2.0+,
this does *not* cover the so-called "standalone" applications that
use U-Boot services by means of the jump table provided by U-Boot
exactly for this purpose - this is merely considered normal use of
U-Boot, and does *not* fall under the heading of "derived work".
The header files "include/image.h" and "arch/*/include/asm/u-boot.h"
define interfaces to U-Boot. Including these (unmodified) header
files in another file is considered normal use of U-Boot, and does
*not* fall under the heading of "derived work".
-- Wolfgang Denk
Licenses/OFL.txt 0 → 100644
View file @ 8e809399
Copyright (c) 2010, Andrey Makarov (makarov@bmstu.ru, mka-at-mailru@mail.ru),
with Reserved Font Name Anka/Coder Narrow.
Copyright (c) 2011, Pablo Impallari (www.impallari.com|impallari@gmail.com),
Rodrigo Fuenzalida (www.rfuenzalida.com) with Reserved Font Name Cantora.
This Font Software is licensed under the SIL Open Font License, Version 1.1.
This license is copied below, and is also available with a FAQ at:
http://scripts.sil.org/OFL
-----------------------------------------------------------
SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
-----------------------------------------------------------
PREAMBLE
The goals of the Open Font License (OFL) are to stimulate worldwide
development of collaborative font projects, to support the font creation
efforts of academic and linguistic communities, and to provide a free and
open framework in which fonts may be shared and improved in partnership
with others.
The OFL allows the licensed fonts to be used, studied, modified and
redistributed freely as long as they are not sold by themselves. The
fonts, including any derivative works, can be bundled, embedded,
redistributed and/or sold with any software provided that any reserved
names are not used by derivative works. The fonts and derivatives,
however, cannot be released under any other type of license. The
requirement for fonts to remain under this license does not apply
to any document created using the fonts or their derivatives.
DEFINITIONS
"Font Software" refers to the set of files released by the Copyright
Holder(s) under this license and clearly marked as such. This may
include source files, build scripts and documentation.
"Reserved Font Name" refers to any names specified as such after the
copyright statement(s).
"Original Version" refers to the collection of Font Software components as
distributed by the Copyright Holder(s).
"Modified Version" refers to any derivative made by adding to, deleting,
or substituting -- in part or in whole -- any of the components of the
Original Version, by changing formats or by porting the Font Software to a
new environment.
"Author" refers to any designer, engineer, programmer, technical
writer or other person who contributed to the Font Software.
PERMISSION & CONDITIONS
Permission is hereby granted, free of charge, to any person obtaining
a copy of the Font Software, to use, study, copy, merge, embed, modify,
redistribute, and sell modified and unmodified copies of the Font
Software, subject to the following conditions:
1) Neither the Font Software nor any of its individual components,
in Original or Modified Versions, may be sold by itself.
2) Original or Modified Versions of the Font Software may be bundled,
redistributed and/or sold with any software, provided that each copy
contains the above copyright notice and this license. These can be
included either as stand-alone text files, human-readable headers or
in the appropriate machine-readable metadata fields within text or
binary files as long as those fields can be easily viewed by the user.
3) No Modified Version of the Font Software may use the Reserved Font
Name(s) unless explicit written permission is granted by the corresponding
Copyright Holder. This restriction only applies to the primary font name as
presented to the users.
4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
Software shall not be used to promote, endorse or advertise any
Modified Version, except to acknowledge the contribution(s) of the
Copyright Holder(s) and the Author(s) or with their explicit written
permission.
5) The Font Software, modified or unmodified, in part or in whole,
must be distributed entirely under this license, and must not be
distributed under any other license. The requirement for fonts to
remain under this license does not apply to any document created
using the Font Software.
TERMINATION
This license becomes null and void if any of the above conditions are
not met.
DISCLAIMER
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
OTHER DEALINGS IN THE FONT SOFTWARE.
Licenses/README 0 → 100644
View file @ 8e809399
SPDX-License-Identifier: GPL-2.0
U-Boot is Free Software. It is copyrighted by Wolfgang Denk and
many others who contributed code (see the actual source code and the
git commit messages for details). You can redistribute U-Boot and/or
modify it under the terms of version 2 of the GNU General Public
License as published by the Free Software Foundation. Most of it can
also be distributed, at your option, under any later version of the
GNU General Public License -- see individual files for exceptions.
NOTE! This license does *not* cover the so-called "standalone"
applications that use U-Boot services by means of the jump table
provided by U-Boot exactly for this purpose - this is merely
considered normal use of U-Boot, and does *not* fall under the
heading of "derived work" -- see file Licenses/Exceptions for
details.
Also note that the GPL and the other licenses are copyrighted by
the Free Software Foundation and other organizations, but the
instance of code that they refer to (the U-Boot source code) is
copyrighted by me and others who actually wrote it.
-- Wolfgang Denk
Like many other projects, U-Boot has a tradition of including big
blocks of License headers in all files. This not only blows up the
source code with mostly redundant information, but also makes it very
difficult to generate License Clearing Reports. An additional problem
is that even the same licenses are referred to by a number of
slightly varying text blocks (full, abbreviated, different
indentation, line wrapping and/or white space, with obsolete address
information, ...) which makes automatic processing a nightmare.
To make this easier, such license headers in the source files will be
replaced with a single line reference to Unique License Identifiers
as defined by the Linux Foundation's SPDX project [1].
If a "SPDX-License-Identifier:" line references more than one Unique
License Identifier, then this means that the respective file can be
used under the terms of either of these licenses, i. e. with
SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
you can choose between GPL-2.0+ and BSD-3-Clause licensing.
We use the SPDX Unique License Identifiers here; these are available
at [2].
License identifier syntax
-------------------------
1. Placement:
The SPDX license identifier in U-Boot files shall be added at the first
possible line in a file which can contain a comment. For the majority
or files this is the first line, except for scripts which require the
'#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX
identifier goes into the second line.
|
2. Style:
The SPDX license identifier is added in form of a comment. The comment
style depends on the file type::
C source: // SPDX-License-Identifier: <SPDX License Expression>
C header: /* SPDX-License-Identifier: <SPDX License Expression> */
ASM: /* SPDX-License-Identifier: <SPDX License Expression> */
scripts: # SPDX-License-Identifier: <SPDX License Expression>
.rst: .. SPDX-License-Identifier: <SPDX License Expression>
.dts{i}: // SPDX-License-Identifier: <SPDX License Expression>
If a specific tool cannot handle the standard comment style, then the
appropriate comment mechanism which the tool accepts shall be used. This
is the reason for having the "/\* \*/" style comment in C header
files. There was build breakage observed with generated .lds files where
'ld' failed to parse the C++ comment. This has been fixed by now, but
there are still older assembler tools which cannot handle C++ style
comments.
|
3. Syntax:
A <SPDX License Expression> is either an SPDX short form license
identifier found on the SPDX License List, or the combination of two
SPDX short form license identifiers separated by "WITH" when a license
exception applies. When multiple licenses apply, an expression consists
of keywords "AND", "OR" separating sub-expressions and surrounded by
"(", ")" .
License identifiers for licenses like [L]GPL with the 'or later' option
are constructed by using a "+" for indicating the 'or later' option.::
// SPDX-License-Identifier: GPL-2.0+
// SPDX-License-Identifier: LGPL-2.1+
WITH should be used when there is a modifier to a license needed.
For example, the linux kernel UAPI files use the expression::
// SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
// SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note
Other examples using WITH exceptions found in the linux kernel are::
// SPDX-License-Identifier: GPL-2.0 WITH mif-exception
// SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
Exceptions can only be used with particular License identifiers. The
valid License identifiers are listed in the tags of the exception text
file.
OR should be used if the file is dual licensed and only one license is
to be selected. For example, some dtsi files are available under dual
licenses::
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
Examples from U-Boot for license expressions in dual licensed files::
// SPDX-License-Identifier: GPL-2.0 OR MIT
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
AND should be used if the file has multiple licenses whose terms all
apply to use the file. For example, if code is inherited from another
project and permission has been given to put it in U-Boot, but the
original license terms need to remain in effect::
// SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) AND MIT
Another other example where both sets of license terms need to be
adhered to is::
// SPDX-License-Identifier: GPL-1.0+ AND LGPL-2.1+
[1] http://spdx.org/
[2] http://spdx.org/licenses/
Full name SPDX Identifier OSI Approved File name URI
=======================================================================================================================================
GNU General Public License v2.0 only GPL-2.0 Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt
GNU General Public License v2.0 or later GPL-2.0+ Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt
GNU Library General Public License v2 or later LGPL-2.0+ Y lgpl-2.0.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.0.txt
GNU Lesser General Public License v2.1 or later LGPL-2.1+ Y lgpl-2.1.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt
eCos license version 2.0 eCos-2.0 eCos-2.0.txt http://www.gnu.org/licenses/ecos-license.html
BSD 2-Clause License BSD-2-Clause Y bsd-2-clause.txt http://spdx.org/licenses/BSD-2-Clause
BSD 3-clause "New" or "Revised" License BSD-3-Clause Y bsd-3-clause.txt http://spdx.org/licenses/BSD-3-Clause#licenseText
IBM PIBS (PowerPC Initialization and IBM-pibs ibm-pibs.txt
Boot Software) license
ISC License ISC Y isc.txt https://spdx.org/licenses/ISC
SIL OPEN FONT LICENSE (OFL-1.1) OFL-1.1 Y OFL.txt https://spdx.org/licenses/OFL-1.1.html
X11 License X11 x11.txt https://spdx.org/licenses/X11.html
Licenses/bsd-2-clause.txt 0 → 100644
View file @ 8e809399
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Licenses/bsd-3-clause.txt 0 → 100644
View file @ 8e809399
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions, and the following disclaimer,
without modification.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. The names of the above-listed copyright holders may not be used
to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Licenses/eCos-2.0.txt 0 → 100644
View file @ 8e809399
Note that this license is not endorsed by the Free Software Foundation.
It is available here as a convenience to readers of [1]the license
list.
The eCos license version 2.0
This file is part of eCos, the Embedded Configurable Operating System.
Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
eCos is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 or (at your option) any later
version.
eCos is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along
with eCos; if not, write to the Free Software Foundation, Inc., 51
Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
As a special exception, if other files instantiate templates or use
macros or inline functions from this file, or you compile this file and
link it with other works to produce a work based on this file, this
file does not by itself cause the resulting work to be covered by the
GNU General Public License. However the source code for this file must
still be made available in accordance with section (3) of the GNU
General Public License.
This exception does not invalidate any other reasons why a work based
on this file might be covered by the GNU General Public License.
Alternative licenses for eCos may be arranged by contacting Red Hat,
Inc. at http://sources.redhat.com/ecos/ecos-license/
-------------------------------------------
####ECOSGPLCOPYRIGHTEND####
References
1. http://www.gnu.org/licenses/license-list.html
Licenses/gpl-2.0.txt 0 → 100644
View file @ 8e809399
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.
Licenses/ibm-pibs.txt 0 → 100644
View file @ 8e809399
This source code has been made available to you by IBM on an AS-IS
basis. Anyone receiving this source is licensed under IBM
copyrights to use it in any way he or she deems fit, including
copying it, modifying it, compiling it, and redistributing it either
with or without modifications. No license under IBM patents or
patent applications is to be implied by the copyright license.
Any user of this software should understand that IBM cannot provide
technical support for this software and will not be responsible for
any consequences resulting from the use of this software.
Any person who transfers this source code or any derivative work
must include the IBM copyright notice, this paragraph, and the
preceding two paragraphs in the transferred software.
COPYRIGHT I B M CORPORATION 1995
LICENSED MATERIAL - PROGRAM PROPERTY OF I B M