Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
/*
* Qualcomm pm8916 pmic gpio driver - part of Qualcomm PM8916 PMIC
*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <power/pmic.h>
#include <spmi/spmi.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
/* Register offset for each gpio */
#define REG_OFFSET(x) ((x) * 0x100)
/* Register maps */
/* Type and subtype are shared for all pm8916 peripherals */
#define REG_TYPE 0x4
#define REG_SUBTYPE 0x5
#define REG_STATUS 0x08
#define REG_STATUS_VAL_MASK 0x1
/* MODE_CTL */
#define REG_CTL 0x40
#define REG_CTL_MODE_MASK 0x70
#define REG_CTL_MODE_INPUT 0x00
#define REG_CTL_MODE_INOUT 0x20
#define REG_CTL_MODE_OUTPUT 0x10
#define REG_CTL_OUTPUT_MASK 0x0F
#define REG_DIG_VIN_CTL 0x41
#define REG_DIG_VIN_VIN0 0
#define REG_DIG_PULL_CTL 0x42
#define REG_DIG_PULL_NO_PU 0x5
#define REG_DIG_OUT_CTL 0x45
#define REG_DIG_OUT_CTL_CMOS (0x0 << 4)
#define REG_DIG_OUT_CTL_DRIVE_L 0x1
#define REG_EN_CTL 0x46
#define REG_EN_CTL_ENABLE (1 << 7)
struct pm8916_gpio_bank {
uint32_t pid; /* Peripheral ID on SPMI bus */
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
};
static int pm8916_gpio_set_direction(struct udevice *dev, unsigned offset,
bool input, int value)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
int ret;
/* Disable the GPIO */
ret = pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL,
REG_EN_CTL_ENABLE, 0);
if (ret < 0)
return ret;
/* Select the mode */
if (input)
ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
REG_CTL_MODE_INPUT);
else
ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL,
REG_CTL_MODE_INOUT | (value ? 1 : 0));
if (ret < 0)
return ret;
/* Set the right pull (no pull) */
ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL,
REG_DIG_PULL_NO_PU);
if (ret < 0)
return ret;
/* Configure output pin drivers if needed */
if (!input) {
/* Select the VIN - VIN0, pin is input so it doesn't matter */
ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_VIN_CTL,
REG_DIG_VIN_VIN0);
if (ret < 0)
return ret;
/* Set the right dig out control */
ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_OUT_CTL,
REG_DIG_OUT_CTL_CMOS |
REG_DIG_OUT_CTL_DRIVE_L);
if (ret < 0)
return ret;
}
/* Enable the GPIO */
return pmic_clrsetbits(dev->parent, gpio_base + REG_EN_CTL, 0,
REG_EN_CTL_ENABLE);
}
static int pm8916_gpio_direction_input(struct udevice *dev, unsigned offset)
{
return pm8916_gpio_set_direction(dev, offset, true, 0);
}
static int pm8916_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
return pm8916_gpio_set_direction(dev, offset, false, value);
}
static int pm8916_gpio_get_function(struct udevice *dev, unsigned offset)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
int reg;
/* Set the output value of the gpio */
reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL);
if (reg < 0)
return reg;
switch (reg & REG_CTL_MODE_MASK) {
case REG_CTL_MODE_INPUT:
return GPIOF_INPUT;
case REG_CTL_MODE_INOUT: /* Fallthrough */
case REG_CTL_MODE_OUTPUT:
return GPIOF_OUTPUT;
default:
return GPIOF_UNKNOWN;
}
}
static int pm8916_gpio_get_value(struct udevice *dev, unsigned offset)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
int reg;
reg = pmic_reg_read(dev->parent, gpio_base + REG_STATUS);
if (reg < 0)
return reg;
return !!(reg & REG_STATUS_VAL_MASK);
}
static int pm8916_gpio_set_value(struct udevice *dev, unsigned offset,
int value)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
uint32_t gpio_base = priv->pid + REG_OFFSET(offset);
/* Set the output value of the gpio */
return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL,
REG_CTL_OUTPUT_MASK, !!value);
}
static const struct dm_gpio_ops pm8916_gpio_ops = {
.direction_input = pm8916_gpio_direction_input,
.direction_output = pm8916_gpio_direction_output,
.get_value = pm8916_gpio_get_value,
.set_value = pm8916_gpio_set_value,
.get_function = pm8916_gpio_get_function,
};
static int pm8916_gpio_probe(struct udevice *dev)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
int reg;
priv->pid = dev_get_addr(dev);
if (priv->pid == FDT_ADDR_T_NONE)
return -EINVAL;
/* Do a sanity check */
reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
if (reg != 0x10)
return -ENODEV;
reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
if (reg != 0x5)
return -ENODEV;
return 0;
}
static int pm8916_gpio_ofdata_to_platdata(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
uc_priv->gpio_count = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
"gpio-count", 0);
uc_priv->bank_name = fdt_getprop(gd->fdt_blob, dev->of_offset,
"gpio-bank-name", NULL);
if (uc_priv->bank_name == NULL)
uc_priv->bank_name = "pm8916";
return 0;
}
static const struct udevice_id pm8916_gpio_ids[] = {
{ .compatible = "qcom,pm8916-gpio" },
{ }
};
U_BOOT_DRIVER(gpio_pm8916) = {
.name = "gpio_pm8916",
.id = UCLASS_GPIO,
.of_match = pm8916_gpio_ids,
.ofdata_to_platdata = pm8916_gpio_ofdata_to_platdata,
.probe = pm8916_gpio_probe,
.ops = &pm8916_gpio_ops,
.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
};
/* Add pmic buttons as GPIO as well - there is no generic way for now */
#define PON_INT_RT_STS 0x10
#define KPDPWR_ON_INT_BIT 0
#define RESIN_ON_INT_BIT 1
static int pm8941_pwrkey_get_function(struct udevice *dev, unsigned offset)
{
return GPIOF_INPUT;
}
static int pm8941_pwrkey_get_value(struct udevice *dev, unsigned offset)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS);
if (reg < 0)
return 0;
switch (offset) {
case 0: /* Power button */
return (reg & BIT(KPDPWR_ON_INT_BIT)) != 0;
break;
case 1: /* Reset button */
default:
return (reg & BIT(RESIN_ON_INT_BIT)) != 0;
break;
}
}
static const struct dm_gpio_ops pm8941_pwrkey_ops = {
.get_value = pm8941_pwrkey_get_value,
.get_function = pm8941_pwrkey_get_function,
};
static int pm8941_pwrkey_probe(struct udevice *dev)
{
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
int reg;
priv->pid = dev_get_addr(dev);
if (priv->pid == FDT_ADDR_T_NONE)
return -EINVAL;
/* Do a sanity check */
reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE);
if (reg != 0x1)
return -ENODEV;
reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE);
if (reg != 0x1)
return -ENODEV;
return 0;
}
static int pm8941_pwrkey_ofdata_to_platdata(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
uc_priv->gpio_count = 2;
if (uc_priv->bank_name == NULL)
uc_priv->bank_name = "pm8916_key";
return 0;
}
static const struct udevice_id pm8941_pwrkey_ids[] = {
{ .compatible = "qcom,pm8916-pwrkey" },
{ }
};
U_BOOT_DRIVER(pwrkey_pm8941) = {
.name = "pwrkey_pm8916",
.id = UCLASS_GPIO,
.of_match = pm8941_pwrkey_ids,
.ofdata_to_platdata = pm8941_pwrkey_ofdata_to_platdata,
.probe = pm8941_pwrkey_probe,
.ops = &pm8941_pwrkey_ops,
.priv_auto_alloc_size = sizeof(struct pm8916_gpio_bank),
};