Skip to content
Snippets Groups Projects
Select Git revision
  • master default protected
  • early-display
  • variant-emmc-nvme-boot
  • 2023-01-25
  • v3
  • variant-emmc-nvme-boot
  • 2020-06-01
7 results
Search by author
  • Any Author
  • Jack Humbert Jack Humbert jackhumbert
1 author
  1. Apr 12, 2016
  3. Mar 23, 2016
  5. Mar 14, 2016
    • Simon Glass's avatar
      Kconfig: Move CONFIG_FIT and related options to Kconfig · 73223f0e
      Simon Glass authored 
      
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: default avatarTom Rini <trini@konsulko.com>
      73223f0e
  7. Dec 10, 2015
  9. Nov 22, 2015
  11. Nov 18, 2015
  13. Oct 20, 2015
  15. Aug 14, 2015
  17. Jul 25, 2015
  19. Jun 26, 2015
  21. Jun 05, 2015
  23. Jun 01, 2015
  25. May 12, 2015
  27. May 04, 2015
  29. Apr 18, 2015
  31. Mar 15, 2015
  33. Jan 22, 2015
  35. Jan 14, 2015
  37. Nov 25, 2014
  39. Nov 13, 2014
  41. Nov 05, 2014
    • Ian Campbell's avatar
      sunxi: kconfig: Introduce CONFIG_TARGET_<BOARD> · d9a20476
      Ian Campbell authored 
      
This was done automatically with the following bits of scripting.

The Kconfig choice content was generated with this script snippet:
    for i in $(git grep -l CONFIG_ARCH_SUNXI configs/*) ; do
        TARGET=$(sed -n -e 's/CONFIG_SYS_EXTRA_OPTIONS="\([^,"]\+\).*/\1/p' $i);
        MACH=$(sed -n -e 's/.*CONFIG_\(MACH_SUN.I\)=./\1/p' $i)
        echo "config TARGET_$TARGET"
        echo "	bool \"$TARGET\""
        echo "	depends on $MACH"
        echo
    done

defconfigs were updated with a sed script (t):
    # Extract board from first entry of CONFIG_SYS_EXTRA_OPTIONS,
    /^CONFIG_SYS_EXTRA_OPTIONS/ {
        s/^\(CONFIG_SYS_EXTRA_OPTIONS="\)\([^,"]\+\),\?\(.*\)/\1\3\nCONFIG_TARGET_\2=y/;

        # Print and delete first line (CONFIG_SYS_EXTRA_OPTIONS), leaving
        # CONFIG_TARGET_<BOARD> in pattern space
        P;D;
    };

    # Move CONFIG_TARGET_<BOARD> to hold space
    /^CONFIG_TARGET/{h;n}

    # Print CONFIG_TARGET_<BOARD> after CONFIG_MACH_<SOC> in either SPL or
    # normal mode.
    /^CONFIG_MACH/{p;g;p;n};
    /^\+S:CONFIG_MACH/{p;g;s/^CONFIG_TARGET/+S:&/;p;n};

    # Print any remaining lines normally
    p;
Run as:
    sed -i -n -f t $(git grep -l CONFIG_ARCH_SUNXI configs/*)
and then manually removing the one instance of CONFIG_SYS_EXTRA_OPTIONS="" from
Colombus_defconfig

board/sunxi/Makefile was updated with:
    sed -e 's/^\(obj-\$(CONFIG_\)\(.*\)\().*+= dram_.*\)/\1TARGET_\2\3/g' board/sunxi/Makefile
and manually retabbing a few lines to line up again.

The board descriptions could certainly be improved.

Signed-off-by: default avatarIan Campbell <ijc@hellion.org.uk>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      d9a20476
    • Ian Campbell's avatar
      sunxi: kconfig: Rename TARGET_SUN[45678]I to MACH_SUN[45678]I. · c3be2793
      Ian Campbell authored 
      
Now we have CONFIG_ARCH_SUNXI as the toplevel, CONFIG_MACH_SUN[45678]I as the
per-SoC option and leave CONFIG_TARGET_BLAH free for individual boards in the
future.

Done automatically with:
    sed -i -e 's/TARGET_\(SUN[45678]I\)/MACH_\1/g' $(git grep -l TARGET_SUN[45678]I)

Signed-off-by: default avatarIan Campbell <ijc@hellion.org.uk>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      c3be2793
    • Ian Campbell's avatar
      sunxi: kconfig: Add top-level ARCH_SUNXI · 2c7e3b90
      Ian Campbell authored 
      
And make TARGET_SUN[45678]I a choice variable under this.

configs updated with:
    sed -i -e 's/^\(\+S:\)\?CONFIG_TARGET_SUN.I=y/\1CONFIG_ARCH_SUNXI=y\n&/g' configs/*

Signed-off-by: default avatarIan Campbell <ijc@hellion.org.uk>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      2c7e3b90
  43. Oct 24, 2014