sunxi: Enable CMD_GPIO on all sunxi boards

We have CONFIG_CMD_GPIO=y in almost all sunxi boards, but after
its Kconfig conversion it has ended up missing on some recently
added boards.

Simply select it for ARCH_SUNXI, so that we get it on all
sunxi boards for both a consistent user experience and simpler
defconfig files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

arch/arm/Kconfig

@@ -538,6 +538,7 @@ config TARGET_CM_T43
 
 config ARCH_SUNXI
 	bool "Support sunxi (Allwinner) SoCs"
+	select CMD_GPIO
 	select CMD_USB
 	select DM
 	select DM_ETH

configs/A10-OLinuXino-Lime_defconfig

@@ -12,7 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y

configs/A10s-OLinuXino-M_defconfig

@@ -13,6 +13,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y

configs/A13-OLinuXinoM_defconfig

@@ -17,6 +17,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_SUNXI_NO_PMIC=y
 CONFIG_USB_EHCI_HCD=y

configs/A13-OLinuXino_defconfig

@@ -19,7 +19,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y

configs/A20-OLinuXino-Lime2_defconfig

@@ -12,7 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800

configs/A20-OLinuXino-Lime_defconfig

@@ -10,7 +10,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800

configs/A20-OLinuXino_MICRO_defconfig

@@ -13,6 +13,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y

configs/A20-Olimex-SOM-EVB_defconfig

@@ -15,7 +15,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y

configs/Ainol_AW1_defconfig

@@ -17,5 +17,4 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_USB_MUSB_HOST=y

configs/Ampe_A76_defconfig

@@ -19,5 +19,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_USB_MUSB_HOST=y

configs/Auxtek-T003_defconfig

@@ -11,6 +11,5 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y

configs/Auxtek-T004_defconfig

@@ -9,6 +9,5 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y

configs/Bananapi_defconfig

@@ -11,7 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y

configs/Bananapro_defconfig

@@ -13,7 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO4_VOLT=2500

configs/CHIP_defconfig

@@ -9,7 +9,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
-CONFIG_CMD_GPIO=y
 CONFIG_AXP_ALDO3_VOLT=3300
 CONFIG_AXP_ALDO4_VOLT=3300
 CONFIG_USB_MUSB_GADGET=y

configs/CSQ_CS908_defconfig

@@ -11,7 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_AXP_DLDO1_VOLT=3300

configs/Chuwi_V7_CW0825_defconfig

@@ -17,7 +17,6 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_VIDEO_LCD_SPI_CS="PA0"
 CONFIG_VIDEO_LCD_SPI_SCLK="PA1"

configs/Colombus_defconfig

@@ -21,7 +21,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y

configs/Cubieboard2_defconfig

@@ -10,6 +10,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y