- Aug 08, 2018
-
-
Troy Kisky authored
Signed-off-by:Troy Kisky <troy.kisky@boundarydevices.com>
-
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by:
-
- Aug 07, 2018
-
-
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
vp.h: CONFIG_IPUV3_CLK 264000000 vp: fix MAINTAINERS file vp: use nitrogen6x clocks.cfg/ddr-setup.cfg vp: add CONFIG_CMD_GPIO vp: explicit fbp_detect_i2c vp: verify port in board_ehci_hcd_init vp: use boundary.h vp: setup rgb_gpio_pads in board_early_init_f vp: add CONFIG_SPI_FLASH_SPANSION vp: vp_defconfig add CONFIG_BLOCK_CACHE vp: use common code for eth init vp: eth.c now in common directory vp: move misc_init_r/do_kbd to common vp: move max77823_init to common vp: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common vp: use common 1066mhz_4x256mx16.cfg vp: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs vp: use common ddr script vp: port to v2018.07 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
Troy Kisky authored
utc.h: CONFIG_IPUV3_CLK 264000000 utc: don't include 115200 in console environment variable utc: add CONFIG_CMD_GPIO utc: explicit fbp_detect_i2c utc: add wlmac utc: verify port in board_ehci_hcd_init utc: use boundary.h utc: setup rgb_gpio_pads in board_early_init_f utc: add CONFIG_SPI_FLASH_SPANSION utc: utc_defconfig add CONFIG_BLOCK_CACHE utc: use common code for eth init utc: eth.c now in common directory utc: move misc_init_r/do_kbd to common utc: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common utc: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs utc: add utc_q1g.cfg utc: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
usd_mr2: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common usd_mr2: add usd_mr2_q1g_defconfig usd_mr2: let CHx_16V_FAULT/CHx_48V_FAULT float usd_mr2: INPUT_FLOAT is in padctl-mx6 now usd_mr2: swap sgtl5000A/B usd_mr2: use common 1066mhz_4x256mx16.cfg usd_mr2_qxg_defconfig: add CONFIG_SPI_FLASH_GIGADEVICE usd_mr2: use common 1066mhz_4x128mx16.cfg usd_mr2: use common ddr scripts usd_mr2: port to v2018.07 Signed-off-by: -
Troy Kisky authored
usd: add CONFIG_CMD_GPIO usd: explicit fbp_detect_i2c usd: use boundary.h usd: add CONFIG_SPI_FLASH_SPANSION usd: usd_defconfig add CONFIG_BLOCK_CACHE usd: use common code for eth init usd: eth.c now in common directory usd: move misc_init_r/do_kbd to common usd: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common usd: use common 1066mhz_4x128mx16.cfg usd: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs usd: use common ddr script usd: port to v2018.07 Signed-off-by:
Ian Coolidge <ian@boundarydevices.com>
-
Troy Kisky authored
ta.h: CONFIG_IPUV3_CLK 264000000 ta: default to Hannstar7 ta.h: change bootdelay to 1 ta: use nitrogen6x/ddr-setup.cfg ta: add CONFIG_CMD_GPIO ta: explicit fbp_detect_i2c ta: use boundary.h ta: add CONFIG_SPI_FLASH_SPANSION ta: no functional change, separate sd3/sd4 pad settings ta: add TM070JDHG30 tianma panel ta: ta_defconfig add CONFIG_BLOCK_CACHE ta: use common code for eth init ta: eth.c now in common directory ta: move misc_init_r/do_kbd to common ta: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common ta: add fb_lvds=tm070jdhg30 to default environment ta: add panel=tm070jdhg30 ta: use common 1066mhz_4x256mx16.cfg ta: use common 1066mhz_4x128mx16.cfg ta: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs ta: use common ddr scripts ta: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
sp.h: CONFIG_IPUV3_CLK 264000000 sp: setup_dispay is done in fbpanel sp: add CONFIG_CMD_GPIO sp: explicit fbp_detect_i2c sp: verify port in board_ehci_hcd_init sp: use boundary.h sp: add CONFIG_SPI_FLASH_SPANSION sp: sp_defconfig add CONFIG_BLOCK_CACHE sp: use common code for eth init sp: eth.c now in common directory sp: move misc_init_r/do_kbd to common sp: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common sp: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs sp: add sp_s512m.cfg sp: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
snap: use nitrogen6x/ddr-setup.cfg snap: add CONFIG_CMD_GPIO snap: use boundary.h snap: add CONFIG_SPI_FLASH_SPANSION snap: snap_defconfig add CONFIG_BLOCK_CACHE snap: use common code for eth init snap: eth.c now in common directory snap: move misc_init_r/do_kbd to common snap: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common snap: use common 1066mhz_4x256mx16.cfg snap: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs snap: use common ddr script snap: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
ses: increase CONFIG_SYS_MALLOC_LEN to 40MB for 1080p display ses: port to v2018.07 Signed-off-by: -
Troy Kisky authored
s.h: CONFIG_IPUV3_CLK 264000000 s: add poweroff to board, and many other changes s: don't include 115200 in console environment variable s: add CONFIG_CMD_GPIO s: explicit fbp_detect_i2c s: verify fuse blown before setting wlmac s: verify port in board_ehci_hcd_init s: use boundary.h s: add CONFIG_SPI_FLASH_SPANSION s: s_defconfig add CONFIG_BLOCK_CACHE s: use common code for eth init s: eth.c now in common directory s: move misc_init_r/do_kbd to common s: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common s: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs s: add s_q2g.cfg s: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
rc: correct AR8035 comments rc.h: CONFIG_IPUV3_CLK 264000000 rc: use nitrogen6x clocks.cfg/ddr-setup.cfg rc: add CONFIG_CMD_GPIO rc: explicit fbp_detect_i2c rc: verify port in board_ehci_hcd_init rc: use boundary.h rc: add CONFIG_SPI_FLASH_SPANSION rc: rc_defconfig add CONFIG_BLOCK_CACHE rc: use common code for eth init rc: eth.c now in common directory rc: move misc_init_r/do_kbd to common rc: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common rc: use common 800mhz_4x128mx16.cfg rc: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs rc: use common ddr script rc: port to v2018.07 Signed-off-by:
Eric Nelson <eric@nelint.com> rc: update to v2017.01 rc: update to v2017.03 Signed-off-by:
-
Troy Kisky authored
per: turn off anx7814/anx7738 per: slimport CBL_DET is high active so add pull down per.h: CONFIG_IPUV3_CLK 264000000 per: use nitrogen6x clocks.cfg/ddr-setup.cfg per: add CONFIG_CMD_GPIO per: explicit fbp_detect_i2c per: use boundary.h per: add CONFIG_SPI_FLASH_SPANSION per: per_defconfig add CONFIG_BLOCK_CACHE per: use common code for eth init per: eth.c now in common directory per: move misc_init_r/do_kbd to common per: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common per: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs per: 1066mhz_2x512mx16.cfg: remove P1 accesses per: use common ddr script per: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
Includes ocquad, ocsolo, and ocsolo1g oc.h: CONFIG_IPUV3_CLK 264000000 oc: setup_dispay is done in fbpanel oc: add CONFIG_CMD_GPIO oc: explicit fbp_detect_i2c oc: verify port in board_ehci_hcd_init oc: use boundary.h oc: add CONFIG_SPI_FLASH_SPANSION oc: ocquad_defconfig add CONFIG_BLOCK_CACHE oc: use common code for eth init oc: eth.c now in common directory oc: move misc_init_r/do_kbd to common oc: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common oc: use common 1066mhz_4x128mx16.cfg oc: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs oc: use common ddr scripts oc: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nw.h: CONFIG_IPUV3_CLK 264000000 nw: add CONFIG_CMD_GPIO nw: explicit fbp_detect_i2c nw2: add CONFIG_CMD_GPIO nw: nw does not have I2C3 nw: remove CONFIG_SYS_I2C_MXC_I2C3 nw: verify port in board_ehci_hcd_init nw: use boundary.h nw: add CONFIG_SPI_FLASH_SPANSION nw: nw_defconfig add CONFIG_BLOCK_CACHE nw: use common code for eth init nw: eth.c now in common directory nw: move misc_init_r/do_kbd to common nw: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nw: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nw: 800mhz_2x256mx16.cfg: use common values MDCFG0: from 0x696c5323 to 0x666a5333 tRFC - from 106 to 103 clocks tXS - from 109 to 107 clocks tFAW - from 19 to 20 clocks MDCFG1: from 0xb66e8d63 to 0xb68e8b63 tRC - from 20 to 21 clocks tWR - from 7 clocks to 6 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x13208030 to 0x15208030 tWR - from 5 to 6 clocks nw: use common ddr script nw: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nitrogen7: add CONFIG_CMD_GPIO nitrogen7: change qspi to 25Mhz nitrogen7: rename imximage.cfg to nitrogen7.cfg nitrogen7: add linking at qspi offset of 0x1000 option nitrogen7: add qspi parameter config nitrogen7: add CONFIG_SPI_FLASH_WINBOND nitrogen7: rename qspi-param to qspi-sst25vf016 nitrogen7: qspi-W25Q128BV initial addition nitrogen7: use boundary.h nitrogen7: add cmd_custom=echo to avoid upgrade message nitrogen7: add wlmac environment variable nitrogen7: fix wlmac nitrogen7: allow 4 bit mode for winbond qspi chip nitrogen7: add qspi-MX25L6405D nitrogen7: swap GPIO1_IO02/GPIO1_IO03, only CLK02 can be slow clock nitrogen7: add CONFIG_SPI_FLASH_SPANSION nitrogen7_defconfig: add CONFIG_SPI_FLASH_MACRONIX nitrogen7_qspi_defconfig: remove unneeded config qspi-sst25vf016: minor changes, such as sflash_B1_size now 0 qspi-SST25VF016B: rename, increase to 76 Mhz nitrogen7: nitrogen7_defconfig add CONFIG_BLOCK_CACHE nitrogen7: use common code for eth init nitrogen7: eth.c now in common directory nitrogen7: move misc_init_r/do_kbd to common nitrogen7: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen7: add display support nitrogen7: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen7: add comment for ddr nitrogen7: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nitrogen6sx: prefer hannstar7 over lg1280x800 nitrogen6sx: add IMX_VD38_AUO_B101EW05 nitrogen6sx: add IMX_VD38_DT070BTFT nitrogen6sx: add CONFIG_CMD_GPIO nitrogen6sx: explicit fbp_detect_i2c nitrogen6sx: use _detect directly nitrogen6sx: LCD should not use FBF_MODESTR nitrogen6sx: use boundary.h nitrogen6sx: print ethernet phy name nitrogen6sx: setup rgb_gpio_pads in board_early_init_f nitrogen6sx: make more like Linux dts file nitrogen6sx: add CONFIG_SPI_FLASH_SPANSION nitrogen6sx: add select MX6SX to Kconfig so that ROM_UNIFIED_SECTIONS is properly selected nitrogen6sx: set usb_ether mac properly nitrogen6sx: nitrogen6sx_defconfig add CONFIG_BLOCK_CACHE nitrogen6sx: turn off power to Silex test module nitrogen6sx: use common code for eth init nitrogen6sx: eth.c now in common directory nitrogen6sx: move misc_init_r/do_kbd to common nitrogen6sx: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen6sx: normal display support nitrogen6sx: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen6sx: add comment for ddr nitrogen6sx: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nitrogen6_vm: prefer hannstar7 over lg1280x800 nitrogen6_vm: add IMX_VD38_AUO_B101EW05 nitrogen6_vm: add IMX_VD38_DT070BTFT nitrogen6_vm.h: CONFIG_IPUV3_CLK 264000000 nitrogen6_vm: setup_dispay is done in fbpanel nitrogen6_vm: add CONFIG_CMD_GPIO nitrogen6_vm: explicit fbp_detect_i2c nitrogen6_vm: use boundary.h nitrogen6_vm: setup rgb_gpio_pads in board_early_init_f nitrogen6_vm: change sdcard drive strength nitrogen6_vm: add CONFIG_SPI_FLASH_SPANSION nitrogen6_vm: change sdcard drive strength(partial revert) nitrogen6_vm: add nitrogen6_vm-pt1g_defconfig nitrogen6_vm: nitrogen6_vm_defconfig add CONFIG_BLOCK_CACHE nitrogen6_vm: use common code for eth init nitrogen6_vm: eth.c now in common directory nitrogen6_vm: move misc_init_r/do_kbd to common nitrogen6_vm: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen6_vm: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen6_vm: use CONFIG_DEFAULT_HITACHI_HVGA nitrogen6_vm: use common ddr scripts nitrogen6_vm: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nitrogen6_som2: add IMX_VD38_AUO_B101EW05 nitrogen6_som2: add IMX_VD38_DT070BTFT nitrogen6_som2: calibrate 1G boards, sample size of only 4 nitrogen6_som2: nitrogen6q_som2_4g.cfg: remove redefine of CONFIG_MX6Q nitrogen6_som2: disable mirroring nitrogen6_som2: 4G calibration nitrogen6_som2: add atheros AR8035 ethernet phy choice nitrogen6_som2: increase drive strength for usdhc2/3, sd card/wifi nitrogen6_som2.h: CONFIG_IPUV3_CLK 264000000 nitrogen6_som2: use nitrogen6x clocks.cfg/ddr-setup.cfg nitrogen6_som2: explicit fbp_detect_i2c nitrogen6_som2: add wlmac nitrogen6_som2: verify port in board_ehci_hcd_init nitrogen6_som2: use boundary.h nitrogen6_som2: setup rgb_gpio_pads in board_early_init_f nitrogen6_som2: add CONFIG_SPI_FLASH_SPANSION nitrogen6q_som2: add CONFIG_CMD_GPIO nitrogen6q_som2: rename some cfg files nitrogen6_som2: add nitrogen6_som2_s512m_defconfig nitrogen6_som2: add nitrogen6_som2_s1g_defconfig nitrogen6_som2: nitrogen6_som2_s1g_defconfig add CONFIG_BLOCK_CACHE nitrogen6_som2: use common code for eth init nitrogen6_som2: eth.c now in common directory nitrogen6_som2: move misc_init_r/do_kbd to common nitrogen6_som2: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen6_som2: use common 1066mhz_4x256mx16.cfg nitrogen6_som2: use common 1066mhz_4x128mx16.cfg nitrogen6_som2: use common 800mhz_4x128mx16.cfg nitrogen6_som2: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen6_som2: fix DEFCONFIG nitrogen6qp_som2_4g nitrogen6_som2: 800mhz_2x128mx16.cfg: remove _P1 accesses nitrogen6_som2: 800mhz_2x256mx16.cfg: remove _P1 accesses nitrogen6_som2: 800mhz_2x128mx16.cfg: use common values CFG0: 0x40435323 to 0x3f435333 tRFC - 65 to 64 clocks tFAW - 19 to 20 clocks CFG1: 0xB66E8D63 to 0xb68e8b63 tRC from 20 to 21 clocks tWR from 7 to 6 clocks MR0: 0x13208030 to 0x15208030 tWR from 5 to 6 clocks nitrogen6_som2: 800mhz_2x256mx16.cfg: :use common values MDCFG0: from 0x696c5323 to 0x666a5333 tRFC - from 106 to 103 clocks tXS - from 109 to 107 clocks tFAW - from 19 to 20 clocks MDCFG1: from 0xb66e8d63 to 0xb68e8b63 tRC - from 20 to 21 clocks tWR - from 7 clocks to 6 clocks MDCFG2: from 0x01ff00dc to 0x01ff00db tRRD from 5 to 4 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x13208030 to 0x15208030 tWR - from 5 to 6 clocks nitrogen6_som2: use common ddr scripts nitrogen6_som2: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nitrogen6_scm: setup rgb_gpio_pads in board_early_init_f nitrogen6_scm: nitrogen6_scm_defconfig add CONFIG_BLOCK_CACHE nitrogen6_scm: use common code for eth init nitrogen6_scm: eth.c now in common directory nitrogen6_scm: move misc_init_r/do_kbd to common nitrogen6_scm: move max77823_init to common nitrogen6_scm: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen6_scm: normal display support nitrogen6_scm: change # of mmc/sdcards to 1 nitrogen6_scm: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen6_scm: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nitrogen6qp_max_defconfig: add imx6qp specific ddr calibration nitrogen6qp_max4g.cfg: add Noc DDR configuration register set nitrogen6qp_max4g.cfg: change IPU priorities for imx6qp nitrogen6_max: prefer hannstar7 over lg1280x800 nitrogen6_max: add IMX_VD38_AUO_B101EW05 nitrogen6_max: add IMX_VD38_DT070BTFT nitrogen6_max: add IMX_VD_LD070WSVGA nitrogen6_max: add IMX_VD38_TM070JDHG30 nitrogen6_max: add IMX_VD_1080P60_J (jeida 1080p dual lvds) nitrogen6_max.h: CONFIG_IPUV3_CLK 264000000 nitrogen6_max: use GP_KSZ9021_xx for KSZ9021 strapping Ready for changing to atheros phy. nitrogen6_max: use nitrogen6x clocks.cfg/ddr-setup.cfg nitrogen6qp_max4g.cfg: Noc DDR config done in ddr-setup now nitrogen6_max4g.cfg: add support for iMX6QP nitrogen6qp_max4g.cfg: use nitrogen6_max4g.cfg instead nitrogen6_max: add CONFIG_CMD_GPIO nitrogen6_max: fix GP_BACKLIGHT_LVDS2 nitrogen6_max.h: make more like nitrogen6x.h nitrogen6_max: explicit fbp_detect_i2c nitrogen6_max: add wlmac nitrogen6_max: verify port in board_ehci_hcd_init nitrogen6_max: use boundary.h nitrogen6_max: add nitrogen6_max_4gr0_defconfig for 4G rank0 nitrogen6_max: setup rgb_gpio_pads in board_early_init_f nitrogen6_max: update comments in 1066mhz_4x512mx16.cfg nitrogen6_max: add nitrogen6_max_dl2g_defconfig nitrogen6_max: add nitrogen6_max_dl4g_defconfig nitrogen6_max: add CONFIG_SPI_FLASH_SPANSION nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 nitrogen6_max: add gt911 touch controller if serializer detected nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 for LVDS2 as well nitrogen6_max: add retries for i2c write failures nitrogen6_max: add ND-070PCAP-1024x600 nitrogen6_max: nitrogen6_max_defconfig add CONFIG_BLOCK_CACHE nitrogen6_max: use common code for eth init nitrogen6_max: eth.c now in common directory nitrogen6_max: move misc_init_r/do_kbd to common nitrogen6_max: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen6_max: add headphone det, drive mute low nitrogen6_max: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen6_max: fix DEFCONFIG nitrogen6_max_4gr0 nitrogen6_max: 800mhz_4x256mx16.cfg: use common values MDCFG0: from 0x686c5343 to 0x666a5333 tRFC - from 105 to 103 clocks tXS - from 109 to 107 clocks tFAW - from 21 to 20 clocks MDCFG1: from 0xb68f8d63 to 0xb68e8b63 tRAS - from 16 to 15 clocks tWR - from 7 clocks to 6 clocks MDCFG2: from 0x01ff00dc to 0x01ff00db tRRD from 5 to 4 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x17208030 to 0x15208030 tWR - from 7 to 6 clocks nitrogen6_max: 800mhz_4x512mx16.cfg: use common values MDCFG0: from 0x686c5343 to 0x666a5343 tRFC - from 105 to 103 clocks tXS - from 109 to 107 clocks MDCFG1: from 0xb68f8d63 to 0xb68e8b63 tRAS - from 16 to 15 clocks tWR - from 7 clocks to 6 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x17208030 to 0x15208030 tWR - from 7 to 6 clocks nitrogen6_max: use common ddr scripts nitrogen6_max: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nitrogen51_vm: add OKAYA_480_272 support nitrogen51_vm: change I2C2 pullup to 47K nitrogen51_vm: nitrogen51_vm_256m_defconfig add CONFIG_BLOCK_CACHE nitrogen51_vm_512m: nitrogen51_vm_512m_defconfig add CONFIG_BLOCK_CACHE nitrogen51_vm: use internal IPU clock for hvga as default nitrogen51_vm: use common code for eth init nitrogen51_vm: eth.c now in common directory nitrogen51_vm: move misc_init_r/do_kbd to common nitrogen51_vm: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen51_vm: swap GPIOKEYS/LEDS pins nitrogen51_vm: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen51_vm: use 32K clock, otherwise clock ticks too fast nitrogen51_vm: initialize more pins, turn off ov5642 nitrogen51_vm: add comment for ddr nitrogen51_vm: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nitrogen51_e: MAINTAINERS: s/NITROGEN6_VM/NITROGEN6_E/ nitrogen51_e: add comment for ddr nitrogen51_e: port to v2018.07 Signed-off-by: -
Troy Kisky authored
Includes nit6xlite and nit6xlite1g nit6xlite: add ASIT500MA6F5D nit6xlite: add CONFIG_IMX_HDMI nit6xlite: add HANNSTAR7/LG1280_800/SHARP_LQ101K1LY04 nit6xlite: add IMX_VD38_AUO_B101EW05 nit6xlite: add IMX_VD38_DT070BTFT nit6xlite.h: CONFIG_IPUV3_CLK 264000000 nit6xlite: setup_dispay is done in fbpanel nit6xlite.h: add basic fastboot support nit6xlite: add CONFIG_CMD_GPIO nit6xlite.c: explicit fbp_detect_i2c nit6xlite: add bd_addr bluetooth mac environment variable nit6xlite: verify fuse blown before setting wlmac nit6xlite: verify fuse blown before setting bd_addr nit6xlite: verify port in board_ehci_hcd_init nit6xlite: use boundary.h nit6xlite: add splash screen support nit6xlite: setup remaining pins nit6xlite: increase sd card drive strength nit6xlite: add secure boot option nit6xlite: add CONFIG_SPI_FLASH_SPANSION nit6xlite: nit6xlite_defconfig add CONFIG_BLOCK_CACHE nit6xlite1g: nit6xlite1g_defconfig add CONFIG_BLOCK_CACHE nit6xlite: use common code for eth init nit6xlite: eth.c now in common directory nit6xlite: move misc_init_r/do_kbd to common nit6xlite: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nit6xlite: mute becomes CEC nit6xlite: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nit6xlite: use common ddr scripts nit6xlite: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
neol: move misc_init_r/do_kbd to common neol: eth.c now in common directory neol: initialize GP_5V_DLP_EN low neol: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common Revert "neol: initialize GP_5V_DLP_EN low" neol: use EIM_DA7 as GP_5V_DLP_EN neol: use common 1066mhz_4x256mx16.cfg neol: leave GP_5V_DLP_EN high for early boards neol: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs neol: drive GP_5V_DLP_EN_REV0 high, don't rely on pull-up neol: use common ddr script neol: port to v2018.07 Signed-off-by:
Stefan Becker <sbecker@neolitics.com>
-
Troy Kisky authored
mx6_r.h: CONFIG_IPUV3_CLK 264000000 mx6_r: add CONFIG_CMD_GPIO mx6_r: explicit fbp_detect_i2c mx6_r: use VDF_LB043 mx6_r: verify port in board_ehci_hcd_init mx6_r: use boundary.h mx6_r: setup rgb_gpio_pads in board_early_init_f mx6_r: add CONFIG_SPI_FLASH_SPANSION mx6_r: mx6_r_defconfig add CONFIG_BLOCK_CACHE mx6_r: use common code for eth init mx6_r: eth.c now in common directory mx6_r: move misc_init_r/do_kbd to common mx6_r: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common mx6_r: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs mx6_r: add mx6_r_q2g.cfg mx6_r: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
mtp.h: CONFIG_IPUV3_CLK 264000000 mtp: use nitrogen6x clocks.cfg/ddr-setup.cfg mtp: add CONFIG_CMD_GPIO mtp: add usbh2 strobe/data mtp: add cmd_custom, to avoid upgrade message mtp: add imx6QP, mtp_qp_defconfig mtp: add wlmac from fuses mtp: s/mac/mac_address/ for consistency mtp: use boundary.h mtp: add 2g config option mtp: add CONFIG_SPI_FLASH_SPANSION mtp: change i2c drive strength to avoid undershoot mtp: s/PAD_CTL_DSE_90ohm/PAD_CTL_DSE_80ohm/ to fix compile error mtp: gadget mac is in ethaddr not eth1addr, because no FEC mtp: update 2G quadplus calibration based on 15 boards mtp: mtp_defconfig add CONFIG_BLOCK_CACHE mtp2g: mtp2g_defconfig add CONFIG_BLOCK_CACHE mtp2g_qp: mtp2g_qp_defconfig add CONFIG_BLOCK_CACHE mtp_qp: mtp_qp_defconfig add CONFIG_BLOCK_CACHE mtp: use common code for eth init mtp: eth.c now in common directory mtp: move misc_init_r/do_kbd to common mtp: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common mtp: use common 1066mhz_4x256mx16.cfg mtp: use common 1066mhz_4x128mx16.cfg mtp: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs mtp: spi: fix at45db041d mtp: use common ddr scripts mtp: port to v2018.07 Signed-off-by:
-
