cm-fx6 is an MX6 based board, and the menuconfig hierarchy should
reflect that. Make TARGET_CM_FX6 dependant on ARCH_MX6.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Move CONFIG_CMD_* options that can be selected in menuconfig to cm-fx6
defconfig.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Refactor display code to only setup hdmi if do_enable_hdmi() is invoked.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Add support for selecting display preset using the environment variable
"displaytype". This is a preparation for future merging of compulab
omap3_display.c display selection code with the cm-fx6 display selection code.

The "panel" environment variable is retained for backwards compatibility.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

Implement a cm-fx6 specific board_video_skip() to provide the option to not
initialize the display.

The new function does not init display if the environment variable "panel" is
not defined, or if it is set to an unsupported value.

Collateral changes:
- Don't use the global displays array (it's CONFIG_IMX_VIDEO_SKIP specific).
- Don't use detect_hdmi(), since env controlled init makes it unnecessary.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>

U-Boot does not explicitly assign the display to an IPU interface. Instead, it
relies on the power-on default of DI0.

Since the kernel reassigns HDMI display to DI1, after a warm reset the HDMI
display no longer works in U-Boot.

Fix this by explicitly assigning HDMI to IPU1 DI0 in U-Boot.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

1. Add DDR script for mx6qpsabreauto board.
2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9]
   and init the enet pll output to 125Mhz.
3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN.

Build target: mx6qpsabreauto_config

Boot Log:
U-Boot 2015.07-rc2-00071-gfd985ff (Jun 29 2015 - 22:10:55 +0800)

CPU:   Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 34C
Reset cause: POR
Board: MX6Q-Sabreauto revA
I2C:   ready
DRAM:  2 GiB
PMIC:  PFUZE100 ID=0x10
Flash: 32 MiB
NAND:  0 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0

Note:
In this patch, we still add a new config mx6qpsabreauto_config,
since SPL is not supported now, and IMX_CONFIG is needed at
build time, so add this config. Future, when SPL is converted,
this config can be removed.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>

Detect the SOC and board variant at runtime and change the dtb name,
but not hardcoding the fdt_file env variable.

Take the following patch as a reference.
Íd58699b157df75f1aa0b363ea9c21add21a0c
"mx6cuboxi: Load the correct 'fdtfile' variable"

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

The i.MX6DQP has a PRG module, need to enable its clock for using IPU.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Brown Oliver <B37094@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

Since the i.MX6QP has fixed the issue in boot ROM, so remove the workaround
for i.MX6QP.

Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

Since i.MX6QP changes some CCM registers, so modify the clocks settings to
follow the hardware changes.

In c files, use runtime check and discard #ifdef.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

Add cpu type for i.MX6QP/DP.

This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP
and MXC_CPU_MX6DP, we should use:
(is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)).

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>

Use more standard boot scripts and also add the capability of
booting via NFS.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

Use the same DCD settings from Congatec's U-boot tree for
the P/N 016113 card.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

Add SATA support.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

Add LVDS and HDMI support.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

Add USB support.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

cgtqmx6eval has a PFUZE100 FSL PMIC connected to I2C2.

Add support for it.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

Add thermal support so that we can see the following message on boot:

CPU:   Industrial temperature grade (-40C to 105C) at 33C

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

cgtqmx6eval has an eMMC connected to ESDHC3.

Add support for it.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

There is no need to use multiple lines when they fit into a single line.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

Perfoming an OR operation on the error is not a good approach.

Return the error immediately for each ESDHC instance instead.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

Declare 'static' when possible.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into
the console and hitting enter afterwards, causes a hang in the system because
CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error
message:
"Unknown command '' - try 'help'".

Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve
this problem.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

Remove the custom prompt and use the default instead.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

DCIMVAC is upgraded to DCCIMVAC for the individual processor
(Cortex-A7) that the DCIMVAC is executed on.

We should follow the linux dma follow. Before DMA read, first
invalidate dcache then after DMA read, invalidate dcache again.

With the DMA direction DMA_FROM_DEVICE, the dcache need be
invalidated again after the DMA completion. The reason is
that we need explicity make sure the dcache been invalidated
thus to get the DMA'ed memory correctly from the physical memory.
Any cache-line fill during the DMA operations such as the
pre-fetching can cause the DMA coherency issue, thus CPU get the stale data.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>

The variable 'ret' is used to store the value returned by pfuze_mode_init(),
so it should be of type 'int' instead of 'unsigned int' in order to
correctly handle negative numbers.

Fix the variable type.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

The variable 'ret' is used to store the value returned by pfuze_mode_init(),
so it should of type 'int' instead of 'unsigned int' in order to correctly
handle negative numbers.

Fix the variable type.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Warp has a MAX77696 PMIC connected via I2C1 bus.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Add support for MAX77696 PMIC.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

It seems that many comments were copied from the I2C uclass, so adjust
the comments for the thermal class.

Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Simon Glass <sjg@chromium.org>

* Extend imximage DCD version 2 to support DCD commands
  CMD_WRITE_CLR_BIT 4 [address] [mask bit] means:
    while ((*address & ~mask) != 0);
  CMD_CHECK_BITS_SET 4 [address] [mask bit] means:
    while ((*address & mask) != mask);
  CMD_CHECK_BITS_CLR 4 [address] [mask bit] means:
    *address = *address & ~mask;
* Add set_dcd_param_v2 helper function to set DCD
  command parameters

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>

This patch adds support for the "OHB System AG" baseboard
with is equipped with the TQMa6S SoM.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Stefano Babic <sbabic@denx.de>

We should not leave the expansion ROM address window open when there
is not a valid ROM.

Suggested-by: Matt Porter <mporter@konsulko.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>

Currently PCI expansion ROM address is assigned by a call to
pciauto_setup_rom() outside of the pci auto config process.
This does not work when expansion ROM is on a device behind
PCI bridge where bridge's memory limit register was already
programmed to a value that does not cover the newly assigned
expansion ROM address. To fix this, we should configure the
ROM address during the auto config process.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>

This driver was originally added to support the native IDE mode for
Intel chipset, however it has some bugs like not supporting ATAPI
devices, endianness issue, or even broken build when CONFIG_LAB48.
Given no board is using this driver as of today, rather than fixing
all these issues we just remove it from the source tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

Update crownbay_defconfig and minnowmax_defconfig with 'savedefconfig'
result so that the config option order matches Kconfig.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

On 32-bit machine strtol() returns LONG_MAX which is 0x7fffffff,
which is wrong for u-boot.rom components like u-boot-x86-16bit.bin.
Change to use strtoll() so that it works on both 32-bit and 64-bit
machines.

Reported-by: Fei Wang <wangfei.jimei@gmail.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>