The jmp _fault generated the following error message, thus change it
to bra _fault:

start.S: Assembler messages:
start.S:310: Error: Conversion of PC relative displacement to absolute

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com>
Cc: Jason Jin <jason.jin@freescale.com>

When the environment sectors in the flash are big, one get those errors :

 mcf547x_8x/start.S:173: relocation truncated to fit: R_68K_PC16 against
  symbol `cpu_init_f' defined in .text section in libmcf547x_8x.a(cpu_init.o)
 mcf547x_8x/start.S:174: relocation truncated to fit: R_68K_PC16 against
  symbol `board_init_f' defined in .text section in libm68k.a(board.o)

Fix that.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com>
Cc: Jason Jin <jason.jin@freescale.com>

The sbc8548/60 (both similar, just variations in UART hardware)
support has been removed from the linux kernel as of v3.6-rc1~132
so lets also now remove it from the u-boot tree as well.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

The mkcksum() function now takes one parameter, the pointer to
11-byte wide character array, which it then operates on.

Currently, the function is wrongly passed (dir_entry)->name, which
is only 8-byte wide character array. Though by further inspecting
the dir_entry structure, it can be noticed that the name[8] entry
is immediatelly followed by ext[3] entry. Thus, name[8] and ext[3]
in the dir_entry structure actually work as this 11-byte wide array
since they're placed right next to each other by current compiler
behavior.

Depending on this is obviously wrong, thus fix this by correctly
passing both (dir_entry)->name and (dir_entry)->ext to the mkcksum()
function and adjust the function appropriately.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>

This information may be useful to compare against command "part uuid",
or if you want to manually paste the information into the kernel
command-line.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
[trini: print_one_part / print_part_dos output strings didn't quite
match before the changes]
Signed-off-by: Tom Rini <trini@ti.com>

Minor cleanups required so later patches don't trigger checkpatch.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

A partition is considered bootable if it either has the "legacy BIOS
bootable" flag set, or if the partition type UUID matches the standard
"system" type.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

When printing the EFI partition table, print the raw attributes. Convert
struct gpt_entry_attributes to a union to allow raw access.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

Add no_block_io_protocol and legacy_bios_bootable attribute definitions.
These are sourced from UEFI Spec 2.3, page 105, table 19. Credits to the
libparted source for the specification pointer.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

When printing the partition table, print the partition type UUID and the
individual partition UUID. Do this unconditionally, since partition UUIDs
are useful.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

The partition name is a long variable-length string. Move it last on
the line to ensure consistent layout and that the entries align with
the "header" line. Also, surround it in quotes, so if it's empty, it's
obvious that something is still being printed.

Also, change the case of the LBA numbers; lower-case looks nicer in my
opinion, and will be more consistent with the UUID printing that is
added later in this series.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

Simplify the partition printing loop in print_part_efi() to bail out
early when the first invalid partition is found, rather than indenting
the whole body of the loop. This simplifies later patches.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

When no valid partitions are found, guarantee that we return -1. This
most likely already happens, since the most recent get_partition_info()
will have returned an error. However, it's best to be explicit.

Remove an unnecessary assignment of ret=0 in the success case; this value
is over-written with the processed partition ID later.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

mpc8xx and mpc5xxx specific includes in cmd_ide.c are not required, remove them.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

Move specific ide_input_data and friends to board-specific file.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

move special case of ide_swap_read() for AU1X00 SoC into SoC-specific directory.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

Keep all IDE-related hooks and overrides in a single file, to avoid confusion

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

Make ide_led() a weak alias instead of global/local function/empty macro
based on CONFIG_IDE_LED value and/or board-specific CONFIGs, to get rid of
board-specific code in cmd_ide.c
Define dummy values to get rid of compoler errors in case where ide_led()
used to be an empty macro

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

Move input_data() and friends to board/cpc45/ide.c, as overrides for weak
aliases in cmd_ide.c

note: checkpatch emits warnings about using volatile

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

This changes input_data() and friends from static function to global symbols
under weak alias, to enable board specific overrides (and therefore get rid of
board-specific code in cmd_ide.c)
Also declare ide_bus_offset in the header file, so other files can use
ATA_CURR_BASE as well.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

Move power control code from ide_reset() into IVM-specific IDE reset code.

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

move most of mpc8xx hooks from cmd_ide.c into ide_preinit() and newly created
ide_init_postreset() (invoked after calling ide_reset after ide_preinit),
some cleanup to make checkpatch happy, enable IDE init hooks in configs of
affected boards.
confusingly, these hooks are used by more than just mpc8xx-based boards, and
therefore are placed in arch/ppc/lib/

note: checkpatch still emits warnings about using volatile

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

There is no difference in codepath with CONFIG_SC3 enabled, so just remove it

Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>

Add STDIO documentation template.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
[trini: Fix DOCBOOKS line as we don't have linker_lists yet]
Signed-off-by: Tom Rini <trini@ti.com>

Add kerneldoc annotations into serial core.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>

Reorder the get_current() function to make it a bit more readable.
The code does not grow and there is minor change in the code logic,
where dev != NULL is now checked in any case.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>

Reorder serial_assign() function to get rid of the extra level of
indentation. Also, adjust the return value to be -EINVAL instead of
positive one to be more consistent.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>

Replace the in-place ad-hoc implementation of serial_puts() within
the drivers with default_serial_puts() call. This cuts down on the
code duplication quite a bit.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>

U-Boot contains a lot of duplicit implementations of serial_puts()
call which just pipes single characters into the port in loop. Implement
function that does this behavior into common code, so others can make
easy use of it.

This function is called default_serial_puts() and it's sole purpose
is to call putc() in loop on the whole string passed to it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>

As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: James F. Dougherty <jfd@broadcom.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Marek Vasut <marex@denx.de>

With almost all the architecture and board BOARD_LATE_INIT does not use.
CONFIG_BOARD_LATE_INIT is used instead.
This changed CONFIG_BOARD_LATE_INIT from BOARD_LATE_INIT.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
CC: Macpaul Lin <macpaul@andestech.com>
[trini: Fixup for context changes]
Signed-off-by: Tom Rini <trini@ti.com>

Provide more information when using redundant environments
Consistently print debug info to stderr

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Fix crash introduced by a073d63a36524453a817ab029fad5b188f46127e
when attempting to delete a variable.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

Both big-endian and little-endian are tested with below commands:
Rom version: (Default, Now we config it as rom version)
qemu-system-mips64el -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic
qemu-system-mips64 -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic
Ram version:
qemu-system-mips64el -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic
qemu-system-mips64 -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic

Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

We define CONFIG_SYS_TEXT_BASE in board's specified header file.
So config.mk is useless, then remove it.

Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com>

Prepare for upcoming mips64 support. This patch add mips64 address
support.

Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com>
[daniel.schwierzeck@gmail.com: prefer _MIPS_SZLONG in posix_types.h to fix some warnings]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

Replace camel-case style with upper-case style globally.

Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com>