To prevent possible double inclusions in future.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

For better readability and setup-handling we refactor the default
environment.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

This define isn't used anymore in the u-boot source tree, so we drop it
from the config header.

We drop it also from the 'config_whitelist.txt'

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

the BMP logo loading has become obsolete and is not used any more. So we
drop the support for it.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

since commit

'd5abcf94' -
ti: boot: Register the MMC controllers in SPL in the same way as in u-boot

MMC boot on brxre1 board is broken, with this commit we make our board
working again.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Adds CONFIG_SPL_USB_GADGET_SUPPORT and CONFIG_SPL_USBETH_SUPPORT.

Removes CONFIG_SPL_NAND_SUPPORT, CONFIG_SPL_MTD_SUPPORT, and CONFIG_SPL_YMODEM_SUPPORT
to free up space to fit in RAM.

Signed-off-by: Michael Welling <mwelling@ieee.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marex@denx.de>

The terminator endif of ifdef _NAND_H_ should be at the
end of file as a fail safe.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>

It turns out this change was not intended to be merged and as such,
revert it.

This reverts commit cdde7de0.

Reported-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

Whistler is an ancient Tegra 2 reference board. I may have been the only
person who ever used it with upstream software, and I've just recycled
the board hardware. Hence, it makes sense to remove support from software.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

Update maintainers for B4860QDS, P1010RDB, P1_TWR, T104xRDB.

Signed-off-by: York Sun <york.sun@nxp.com>

Enable DHCP command by default. Update maintainer info.

Signed-off-by: York Sun <york.sun@nxp.com>

Enable DHCP command by default. Move environmental variable location
to before U-Boot image. Enlarge reserved mem for malloc. Update
maintainer.

Signed-off-by: York Sun <york.sun@nxp.com>

Signed-off-by: York Sun <york.sun@nxp.com>

Signed-off-by: York Sun <york.sun@nxp.com>

Signed-off-by: York Sun <york.sun@nxp.com>

Signed-off-by: York Sun <york.sun@nxp.com>

Signed-off-by: York Sun <york.sun@nxp.com>

Signed-off-by: York Sun <york.sun@nxp.com>

Commit a058052c changed the generic phy_reset() to clear all bits in
BMCR. This inevitably clears the ANEG bit. m88e1145 requires any
change to ANEG bit to be followed by a software reset. This seems to
be different from other PHYs. Implement read-modify-write procedure
for this PHY init.

Signed-off-by: York Sun <york.sun@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

Enable DHCP command to make TFTP easier.
Enable DDR interactive debug by default.

Signed-off-by: York Sun <york.sun@nxp.com>

Fix compiling error of "no member named 'taamin_ps'" for DDR2.

Signed-off-by: York Sun <york.sun@nxp.com>

Enable DHCP command to make TFTP easier. Users don't have to use
static IP address.

Signed-off-by: York Sun <york.sun@nxp.com>

Signed-off-by: York Sun <york.sun@nxp.com>

Signed-off-by: York Sun <york.sun@nxp.com>

Drop support for these two legacy boards.

Signed-off-by: York Sun <york.sun@nxp.com>

commit 06507988 ("board: am335x: Introduce scale_vcores")
updated voltages of each board based on efuse. It updated
beagle bone specific voltages under the condition board_is_bone().
But this is true only for BeagleBoneWhite. Due to which voltages
are not configured for BBB, BBW as wrong device is being probed.

So create a common function board_is_beaglebonex() which includes
am335x based beagle family. Use this for updating voltages.

Also remove extra if condition for selecting voltages which is
done later using a switch case and match usb current limit as
before the commit 06507988.

Fixes: 06507988 ("board: am335x: Introduce scale_vcores")
Reported-by: Emmanuel Vadot <manu@bidouilliste.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Use eMMC (instead of SD card) to store U-Boot environment. Use
"reserved" partition for U-Boot environment.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com>

Increase the size of u-boot.img, so that it conforms with new DFU
configuration (see commit [1]).

[1] 7a53a1a8 ARM: ti: Update layout for MMC and eMMC (env and dfu)

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Increase the size of u-boot.img, so that it conforms with new DFU
configuration (see commit [1]).

[1] 7a53a1a8 ARM: ti: Update layout for MMC and eMMC (env and dfu)

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

Add myself as mpc83xx custodian.

refer in the README to tbots webpage, and delete
the README in tools/tbot, as the latest documentation
for tbot is on this webpage.

Signed-off-by: Heiko Schocher <hs@denx.de>

With Davinci I2C switching to device model, K2HK requires U-boot specific
device tree entries. This is only required for I2C 1 which is needed
extremely early during the boot process.

Fixes: 1743d040 ("ARM: keystone: Enable DM_I2C by default")
Reported-by: Yan Liu <yan-liu@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>

The list of symbols listed in the error message for missing Kconfig
symbols is out of sync with the symbols actually tested.
Add the missing symbols and reorder their appearance to be in sync
with the #if statement for easier checking.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>

commit 06a040a3 ("cmd: mtdparts: fix null pointer dereference in parse_mtdparts")
removed the initialization of a pointer variable, which is
subsequently used in a debug() call. This produces an uninitialized
variable warning, when compiling with DEBUG defined.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>

Current code does not set output level in bcm6345_gpio_direction_output,
fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>

relocate_code() calculates the relocation offset wrt. the symbol
__image_copy_start which happens to have the same value as
CONFIG_TEXT_BASE on most systems.
When creating an i.MX boot image with an integrated IVT it is
convenient to have CONFIG_TEXT_BASE point to the start of the IVT
that is prepended to the actual code. Thus CONFIG_TEXT_BASE will
differ from __image_copy_start, while the calculation
'gd->relocaddr - __image_copy_start' still gives the right relocation
offset.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>