Forked from
Reform / reform-boundary-uboot
Source project has a limited visibility.
-
Troy Kisky authored
nitrogen6qp_max_defconfig: add imx6qp specific ddr calibration nitrogen6qp_max4g.cfg: add Noc DDR configuration register set nitrogen6qp_max4g.cfg: change IPU priorities for imx6qp nitrogen6_max: prefer hannstar7 over lg1280x800 nitrogen6_max: add IMX_VD38_AUO_B101EW05 nitrogen6_max: add IMX_VD38_DT070BTFT nitrogen6_max: add IMX_VD_LD070WSVGA nitrogen6_max: add IMX_VD38_TM070JDHG30 nitrogen6_max: add IMX_VD_1080P60_J (jeida 1080p dual lvds) nitrogen6_max.h: CONFIG_IPUV3_CLK 264000000 nitrogen6_max: use GP_KSZ9021_xx for KSZ9021 strapping Ready for changing to atheros phy. nitrogen6_max: use nitrogen6x clocks.cfg/ddr-setup.cfg nitrogen6qp_max4g.cfg: Noc DDR config done in ddr-setup now nitrogen6_max4g.cfg: add support for iMX6QP nitrogen6qp_max4g.cfg: use nitrogen6_max4g.cfg instead nitrogen6_max: add CONFIG_CMD_GPIO nitrogen6_max: fix GP_BACKLIGHT_LVDS2 nitrogen6_max.h: make more like nitrogen6x.h nitrogen6_max: explicit fbp_detect_i2c nitrogen6_max: add wlmac nitrogen6_max: verify port in board_ehci_hcd_init nitrogen6_max: use boundary.h nitrogen6_max: add nitrogen6_max_4gr0_defconfig for 4G rank0 nitrogen6_max: setup rgb_gpio_pads in board_early_init_f nitrogen6_max: update comments in 1066mhz_4x512mx16.cfg nitrogen6_max: add nitrogen6_max_dl2g_defconfig nitrogen6_max: add nitrogen6_max_dl4g_defconfig nitrogen6_max: add CONFIG_SPI_FLASH_SPANSION nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 nitrogen6_max: add gt911 touch controller if serializer detected nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 for LVDS2 as well nitrogen6_max: add retries for i2c write failures nitrogen6_max: add ND-070PCAP-1024x600 nitrogen6_max: nitrogen6_max_defconfig add CONFIG_BLOCK_CACHE nitrogen6_max: use common code for eth init nitrogen6_max: eth.c now in common directory nitrogen6_max: move misc_init_r/do_kbd to common nitrogen6_max: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen6_max: add headphone det, drive mute low nitrogen6_max: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen6_max: fix DEFCONFIG nitrogen6_max_4gr0 nitrogen6_max: 800mhz_4x256mx16.cfg: use common values MDCFG0: from 0x686c5343 to 0x666a5333 tRFC - from 105 to 103 clocks tXS - from 109 to 107 clocks tFAW - from 21 to 20 clocks MDCFG1: from 0xb68f8d63 to 0xb68e8b63 tRAS - from 16 to 15 clocks tWR - from 7 clocks to 6 clocks MDCFG2: from 0x01ff00dc to 0x01ff00db tRRD from 5 to 4 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x17208030 to 0x15208030 tWR - from 7 to 6 clocks nitrogen6_max: 800mhz_4x512mx16.cfg: use common values MDCFG0: from 0x686c5343 to 0x666a5343 tRFC - from 105 to 103 clocks tXS - from 109 to 107 clocks MDCFG1: from 0xb68f8d63 to 0xb68e8b63 tRAS - from 16 to 15 clocks tWR - from 7 clocks to 6 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x17208030 to 0x15208030 tWR - from 7 to 6 clocks nitrogen6_max: use common ddr scripts nitrogen6_max: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> nitrogen6qp_max: add preliminary support nitrogen6_max.h: add basic fastboot support Only works on eMMC with GPT already present. nitrogen6_max: add secure boot option nitrogen6_max: declare TC358743 interrupt as input nitrogen6_max: update to v2017.01 nitrogen6_max: update to v2017.03 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
Troy Kisky authorednitrogen6qp_max_defconfig: add imx6qp specific ddr calibration nitrogen6qp_max4g.cfg: add Noc DDR configuration register set nitrogen6qp_max4g.cfg: change IPU priorities for imx6qp nitrogen6_max: prefer hannstar7 over lg1280x800 nitrogen6_max: add IMX_VD38_AUO_B101EW05 nitrogen6_max: add IMX_VD38_DT070BTFT nitrogen6_max: add IMX_VD_LD070WSVGA nitrogen6_max: add IMX_VD38_TM070JDHG30 nitrogen6_max: add IMX_VD_1080P60_J (jeida 1080p dual lvds) nitrogen6_max.h: CONFIG_IPUV3_CLK 264000000 nitrogen6_max: use GP_KSZ9021_xx for KSZ9021 strapping Ready for changing to atheros phy. nitrogen6_max: use nitrogen6x clocks.cfg/ddr-setup.cfg nitrogen6qp_max4g.cfg: Noc DDR config done in ddr-setup now nitrogen6_max4g.cfg: add support for iMX6QP nitrogen6qp_max4g.cfg: use nitrogen6_max4g.cfg instead nitrogen6_max: add CONFIG_CMD_GPIO nitrogen6_max: fix GP_BACKLIGHT_LVDS2 nitrogen6_max.h: make more like nitrogen6x.h nitrogen6_max: explicit fbp_detect_i2c nitrogen6_max: add wlmac nitrogen6_max: verify port in board_ehci_hcd_init nitrogen6_max: use boundary.h nitrogen6_max: add nitrogen6_max_4gr0_defconfig for 4G rank0 nitrogen6_max: setup rgb_gpio_pads in board_early_init_f nitrogen6_max: update comments in 1066mhz_4x512mx16.cfg nitrogen6_max: add nitrogen6_max_dl2g_defconfig nitrogen6_max: add nitrogen6_max_dl4g_defconfig nitrogen6_max: add CONFIG_SPI_FLASH_SPANSION nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 nitrogen6_max: add gt911 touch controller if serializer detected nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 for LVDS2 as well nitrogen6_max: add retries for i2c write failures nitrogen6_max: add ND-070PCAP-1024x600 nitrogen6_max: nitrogen6_max_defconfig add CONFIG_BLOCK_CACHE nitrogen6_max: use common code for eth init nitrogen6_max: eth.c now in common directory nitrogen6_max: move misc_init_r/do_kbd to common nitrogen6_max: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen6_max: add headphone det, drive mute low nitrogen6_max: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen6_max: fix DEFCONFIG nitrogen6_max_4gr0 nitrogen6_max: 800mhz_4x256mx16.cfg: use common values MDCFG0: from 0x686c5343 to 0x666a5333 tRFC - from 105 to 103 clocks tXS - from 109 to 107 clocks tFAW - from 21 to 20 clocks MDCFG1: from 0xb68f8d63 to 0xb68e8b63 tRAS - from 16 to 15 clocks tWR - from 7 clocks to 6 clocks MDCFG2: from 0x01ff00dc to 0x01ff00db tRRD from 5 to 4 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x17208030 to 0x15208030 tWR - from 7 to 6 clocks nitrogen6_max: 800mhz_4x512mx16.cfg: use common values MDCFG0: from 0x686c5343 to 0x666a5343 tRFC - from 105 to 103 clocks tXS - from 109 to 107 clocks MDCFG1: from 0xb68f8d63 to 0xb68e8b63 tRAS - from 16 to 15 clocks tWR - from 7 clocks to 6 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x17208030 to 0x15208030 tWR - from 7 to 6 clocks nitrogen6_max: use common ddr scripts nitrogen6_max: port to v2018.07 Signed-off-by:
