Newer
Older
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Memory Functions
*
* Copied from FADS ROM, Dan Malek (dmalek@jlc.net)
*/
#include <common.h>
#include <command.h>
#ifdef CONFIG_HAS_DATAFLASH
#include <dataflash.h>
#endif
#include <watchdog.h>
#ifdef CMD_MEM_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
static int mod_mem(cmd_tbl_t *, int, int, int, char * const []);
/* Display values from last command.
* Memory modify remembered values are different from display memory.
*/
static uint dp_last_addr, dp_last_size;
static uint dp_last_length = 0x40;
static uint mm_last_addr, mm_last_size;
static ulong base_address = 0;
/* Memory Display
*
* Syntax:
* md{.b, .w, .l} {addr} {len}
*/
#define DISP_LINE_LEN 16
int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ulong addr, length;
#if defined(CONFIG_HAS_DATAFLASH)
ulong nbytes, linebytes;
#endif
int size;
int rc = 0;
/* We use the last specified parameters, unless new ones are
* entered.
*/
addr = dp_last_addr;
size = dp_last_size;
length = dp_last_length;
if (argc < 2)
return cmd_usage(cmdtp);
if ((flag & CMD_FLAG_REPEAT) == 0) {
/* New command specified. Check for a size specification.
* Defaults to long if no or incorrect specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
/* Address is specified since argc > 1
*/
addr = simple_strtoul(argv[1], NULL, 16);
addr += base_address;
/* If another parameter, it is the length to display.
* Length is the number of objects, not number of bytes.
*/
if (argc > 2)
length = simple_strtoul(argv[2], NULL, 16);
}
#if defined(CONFIG_HAS_DATAFLASH)
/* Print the lines.
*
* We buffer all read data, so we can make sure data is read only
* once, and all accesses are with the specified bus width.
*/
nbytes = length * size;
do {
char linebuf[DISP_LINE_LEN];
void* p;
linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
rc = read_dataflash(addr, (linebytes/size)*size, linebuf);
p = (rc == DATAFLASH_OK) ? linebuf : (void*)addr;
print_buffer(addr, p, size, linebytes/size, DISP_LINE_LEN/size);
addr += linebytes;
if (ctrlc()) {
rc = 1;
break;
}
} while (nbytes > 0);
#else
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
# if defined(CONFIG_BLACKFIN)
/* See if we're trying to display L1 inst */
if (addr_bfin_on_chip_mem(addr)) {
char linebuf[DISP_LINE_LEN];
ulong linebytes, nbytes = length * size;
do {
linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
memcpy(linebuf, (void *)addr, linebytes);
print_buffer(addr, linebuf, size, linebytes/size, DISP_LINE_LEN/size);
nbytes -= linebytes;
addr += linebytes;
if (ctrlc()) {
rc = 1;
break;
}
} while (nbytes > 0);
} else
# endif
{
/* Print the lines. */
print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size);
addr += size*length;
}
#endif
dp_last_addr = addr;
dp_last_length = length;
dp_last_size = size;
return (rc);
}
int do_mem_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return mod_mem (cmdtp, 1, flag, argc, argv);
}
int do_mem_nm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return mod_mem (cmdtp, 0, flag, argc, argv);
}
int do_mem_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ulong addr, writeval, count;
int size;
if ((argc < 3) || (argc > 4))
return cmd_usage(cmdtp);
if ((size = cmd_get_data_size(argv[0], 4)) < 1)
return 1;
/* Address is specified since argc > 1
*/
addr = simple_strtoul(argv[1], NULL, 16);
addr += base_address;
/* Get the value to write.
*/
writeval = simple_strtoul(argv[2], NULL, 16);
/* Count ? */
if (argc == 4) {
count = simple_strtoul(argv[3], NULL, 16);
} else {
count = 1;
}
while (count-- > 0) {
if (size == 4)
*((ulong *)addr) = (ulong )writeval;
else if (size == 2)
*((ushort *)addr) = (ushort)writeval;
else
*((u_char *)addr) = (u_char)writeval;
#ifdef CONFIG_MX_CYCLIC
int do_mem_mdc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
ulong count;
if (argc < 4)
return cmd_usage(cmdtp);
count = simple_strtoul(argv[3], NULL, 10);
for (;;) {
do_mem_md (NULL, 0, 3, argv);
/* delay for <count> ms... */
for (i=0; i<count; i++)
udelay (1000);
/* check for ctrl-c to abort... */
if (ctrlc()) {
puts("Abort\n");
return 0;
}
}
return 0;
}
int do_mem_mwc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
ulong count;
if (argc < 4)
return cmd_usage(cmdtp);
count = simple_strtoul(argv[3], NULL, 10);
for (;;) {
do_mem_mw (NULL, 0, 3, argv);
/* delay for <count> ms... */
for (i=0; i<count; i++)
udelay (1000);
/* check for ctrl-c to abort... */
if (ctrlc()) {
puts("Abort\n");
return 0;
}
}
return 0;
}
#endif /* CONFIG_MX_CYCLIC */
int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ulong addr1, addr2, count, ngood;
int size;
if (argc != 4)
return cmd_usage(cmdtp);
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
addr1 = simple_strtoul(argv[1], NULL, 16);
addr1 += base_address;
addr2 = simple_strtoul(argv[2], NULL, 16);
addr2 += base_address;
count = simple_strtoul(argv[3], NULL, 16);
#ifdef CONFIG_HAS_DATAFLASH
if (addr_dataflash(addr1) | addr_dataflash(addr2)){
puts ("Comparison with DataFlash space not supported.\n\r");
return 0;
}
#endif
#ifdef CONFIG_BLACKFIN
if (addr_bfin_on_chip_mem(addr1) || addr_bfin_on_chip_mem(addr2)) {
puts ("Comparison with L1 instruction memory not supported.\n\r");
return 0;
}
#endif
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
ngood = 0;
while (count-- > 0) {
if (size == 4) {
ulong word1 = *(ulong *)addr1;
ulong word2 = *(ulong *)addr2;
if (word1 != word2) {
printf("word at 0x%08lx (0x%08lx) "
"!= word at 0x%08lx (0x%08lx)\n",
addr1, word1, addr2, word2);
rcode = 1;
break;
}
}
else if (size == 2) {
ushort hword1 = *(ushort *)addr1;
ushort hword2 = *(ushort *)addr2;
if (hword1 != hword2) {
printf("halfword at 0x%08lx (0x%04x) "
"!= halfword at 0x%08lx (0x%04x)\n",
addr1, hword1, addr2, hword2);
rcode = 1;
break;
}
}
else {
u_char byte1 = *(u_char *)addr1;
u_char byte2 = *(u_char *)addr2;
if (byte1 != byte2) {
printf("byte at 0x%08lx (0x%02x) "
"!= byte at 0x%08lx (0x%02x)\n",
addr1, byte1, addr2, byte2);
rcode = 1;
break;
}
}
ngood++;
addr1 += size;
addr2 += size;
/* reset watchdog from time to time */
if ((count % (64 << 10)) == 0)
WATCHDOG_RESET();
}
printf("Total of %ld %s%s were the same\n",
ngood, size == 4 ? "word" : size == 2 ? "halfword" : "byte",
ngood == 1 ? "" : "s");
return rcode;
}
int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ulong addr, dest, count;
int size;
if (argc != 4)
return cmd_usage(cmdtp);
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
addr = simple_strtoul(argv[1], NULL, 16);
addr += base_address;
dest = simple_strtoul(argv[2], NULL, 16);
dest += base_address;
count = simple_strtoul(argv[3], NULL, 16);
if (count == 0) {
puts ("Zero length ???\n");
return 1;
}
#ifndef CONFIG_SYS_NO_FLASH
if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
if (rc != 0) {
flash_perror (rc);
return (1);
}
puts ("done\n");
return 0;
}
#endif
#ifdef CONFIG_HAS_DATAFLASH
/* Check if we are copying from RAM or Flash to DataFlash */
if (addr_dataflash(dest) && !addr_dataflash(addr)){
int rc;
puts ("Copy to DataFlash... ");
rc = write_dataflash (dest, addr, count*size);
if (rc != 1) {
dataflash_perror (rc);
return (1);
}
puts ("done\n");
return 0;
}
/* Check if we are copying from DataFlash to RAM */
if (addr_dataflash(addr) && !addr_dataflash(dest)
#ifndef CONFIG_SYS_NO_FLASH
&& (addr2info(dest) == NULL)
#endif
){
int rc;
rc = read_dataflash(addr, count * size, (char *) dest);
if (rc != 1) {
dataflash_perror (rc);
return (1);
}
return 0;
}
if (addr_dataflash(addr) && addr_dataflash(dest)){
puts ("Unsupported combination of source/destination.\n\r");
return 1;
}
#endif
#ifdef CONFIG_BLACKFIN
/* See if we're copying to/from L1 inst */
if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
memcpy((void *)dest, (void *)addr, count * size);
return 0;
}
#endif
while (count-- > 0) {
if (size == 4)
*((ulong *)dest) = *((ulong *)addr);
else if (size == 2)
*((ushort *)dest) = *((ushort *)addr);
else
*((u_char *)dest) = *((u_char *)addr);
addr += size;
dest += size;
/* reset watchdog from time to time */
if ((count % (64 << 10)) == 0)
WATCHDOG_RESET();
int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc > 1) {
/* Set new base address.
*/
base_address = simple_strtoul(argv[1], NULL, 16);
}
/* Print the current base address.
*/
printf("Base Address: 0x%08lx\n", base_address);
return 0;
}
int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
int size;
volatile uint *longp;
volatile ushort *shortp;
volatile u_char *cp;
if (argc < 3)
return cmd_usage(cmdtp);
/* Check for a size spefication.
* Defaults to long if no or incorrect specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
/* Address is always specified.
*/
addr = simple_strtoul(argv[1], NULL, 16);
/* Length is the number of objects, not number of bytes.
*/
length = simple_strtoul(argv[2], NULL, 16);
/* We want to optimize the loops to run as fast as possible.
* If we have only one object, just run infinite loops.
*/
if (length == 1) {
if (size == 4) {
longp = (uint *)addr;
for (;;)
i = *longp;
}
if (size == 2) {
shortp = (ushort *)addr;
for (;;)
i = *shortp;
}
cp = (u_char *)addr;
for (;;)
i = *cp;
}
if (size == 4) {
for (;;) {
longp = (uint *)addr;
i = length;
while (i-- > 0)
}
}
if (size == 2) {
for (;;) {
shortp = (ushort *)addr;
i = length;
while (i-- > 0)
}
}
for (;;) {
cp = (u_char *)addr;
i = length;
while (i-- > 0)
int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, length, i, data;
int size;
volatile uint *longp;
volatile ushort *shortp;
volatile u_char *cp;
if (argc < 4)
return cmd_usage(cmdtp);
/* Check for a size spefication.
* Defaults to long if no or incorrect specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
/* Address is always specified.
*/
addr = simple_strtoul(argv[1], NULL, 16);
/* Length is the number of objects, not number of bytes.
*/
length = simple_strtoul(argv[2], NULL, 16);
/* data to write */
data = simple_strtoul(argv[3], NULL, 16);
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
/* We want to optimize the loops to run as fast as possible.
* If we have only one object, just run infinite loops.
*/
if (length == 1) {
if (size == 4) {
longp = (uint *)addr;
for (;;)
*longp = data;
}
if (size == 2) {
shortp = (ushort *)addr;
for (;;)
*shortp = data;
}
cp = (u_char *)addr;
for (;;)
*cp = data;
}
if (size == 4) {
for (;;) {
longp = (uint *)addr;
i = length;
while (i-- > 0)
*longp++ = data;
}
}
if (size == 2) {
for (;;) {
shortp = (ushort *)addr;
i = length;
while (i-- > 0)
*shortp++ = data;
}
}
for (;;) {
cp = (u_char *)addr;
i = length;
while (i-- > 0)
*cp++ = data;
}
}
#endif /* CONFIG_LOOPW */
/*
* Perform a memory test. A more complete alternative test can be
* configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until
* interrupted by ctrl-c or by a failure of one of the sub-tests.
*/
int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
vu_long *addr, *start, *end;
ulong val;
ulong readback;
int iterations = 1;
int iteration_limit;
#if defined(CONFIG_SYS_ALT_MEMTEST)
vu_long offset;
vu_long test_offset;
vu_long pattern;
vu_long temp;
vu_long anti_pattern;
vu_long num_words;
#if defined(CONFIG_SYS_MEMTEST_SCRATCH)
vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH;
vu_long *dummy = 0; /* yes, this is address 0x0, not NULL */
int j;
static const ulong bitpattern[] = {
0x00000001, /* single bit */
0x00000003, /* two adjacent bits */
0x00000007, /* three adjacent bits */
0x0000000F, /* four adjacent bits */
0x00000005, /* two non-adjacent bits */
0x00000015, /* three non-adjacent bits */
0x00000055, /* four non-adjacent bits */
0xaaaaaaaa, /* alternating 1/0 */
};
#else
ulong incr;
ulong pattern;
#endif
start = (ulong *)CONFIG_SYS_MEMTEST_START;
end = (ulong *)(CONFIG_SYS_MEMTEST_END);
if (argc > 4)
iteration_limit = (ulong)simple_strtoul(argv[4], NULL, 16);
else
iteration_limit = 0;
#if defined(CONFIG_SYS_ALT_MEMTEST)
printf ("Testing %08x ... %08x:\n", (uint)start, (uint)end);
PRINTF("%s:%d: start 0x%p end 0x%p\n",
__FUNCTION__, __LINE__, start, end);
for (;;) {
if (ctrlc()) {
putc ('\n');
return 1;
}
if (iteration_limit && iterations > iteration_limit) {
printf("Tested %d iteration(s) with %lu errors.\n",
iterations-1, errs);
return errs != 0;
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
iterations++;
/*
* Data line test: write a pattern to the first
* location, write the 1's complement to a 'parking'
* address (changes the state of the data bus so a
* floating bus doen't give a false OK), and then
* read the value back. Note that we read it back
* into a variable because the next time we read it,
* it might be right (been there, tough to explain to
* the quality guys why it prints a failure when the
* "is" and "should be" are obviously the same in the
* error message).
*
* Rather than exhaustively testing, we test some
* patterns by shifting '1' bits through a field of
* '0's and '0' bits through a field of '1's (i.e.
* pattern and ~pattern).
*/
addr = start;
for (j = 0; j < sizeof(bitpattern)/sizeof(bitpattern[0]); j++) {
val = bitpattern[j];
for(; val != 0; val <<= 1) {
*addr = val;
*dummy = ~val; /* clear the test data off of the bus */
readback = *addr;
if(readback != val) {
printf ("FAILURE (data line): "
errs++;
if (ctrlc()) {
putc ('\n');
return 1;
}
}
*addr = ~val;
*dummy = val;
readback = *addr;
if(readback != ~val) {
printf ("FAILURE (data line): "
"Is %08lx, should be %08lx\n",
errs++;
if (ctrlc()) {
putc ('\n');
return 1;
}
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
}
}
}
/*
* Based on code whose Original Author and Copyright
* information follows: Copyright (c) 1998 by Michael
* Barr. This software is placed into the public
* domain and may be used for any purpose. However,
* this notice must not be changed or removed and no
* warranty is either expressed or implied by its
* publication or distribution.
*/
/*
* Address line test
*
* Description: Test the address bus wiring in a
* memory region by performing a walking
* 1's test on the relevant bits of the
* address and checking for aliasing.
* This test will find single-bit
* address failures such as stuck -high,
* stuck-low, and shorted pins. The base
* address and size of the region are
* selected by the caller.
*
* Notes: For best results, the selected base
* address should have enough LSB 0's to
* guarantee single address bit changes.
* For example, to test a 64-Kbyte
* region, select a base address on a
* 64-Kbyte boundary. Also, select the
* region size as a power-of-two if at
* all possible.
*
* Returns: 0 if the test succeeds, 1 if the test fails.
*/
len = ((ulong)end - (ulong)start)/sizeof(vu_long);
pattern = (vu_long) 0xaaaaaaaa;
anti_pattern = (vu_long) 0x55555555;
PRINTF("%s:%d: length = 0x%.8lx\n",
/*
* Write the default pattern at each of the
* power-of-two offsets.
*/
for (offset = 1; offset < len; offset <<= 1) {
start[offset] = pattern;
}
/*
* Check for address bits stuck high.
*/
test_offset = 0;
start[test_offset] = anti_pattern;
for (offset = 1; offset < len; offset <<= 1) {
temp = start[offset];
if (temp != pattern) {
printf ("\nFAILURE: Address bit stuck high @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx\n",
(ulong)&start[offset], pattern, temp);
errs++;
if (ctrlc()) {
putc ('\n');
return 1;
}
WATCHDOG_RESET();
/*
* Check for addr bits stuck low or shorted.
*/
for (test_offset = 1; test_offset < len; test_offset <<= 1) {
for (offset = 1; offset < len; offset <<= 1) {
temp = start[offset];
if ((temp != pattern) && (offset != test_offset)) {
printf ("\nFAILURE: Address bit stuck low or shorted @"
" 0x%.8lx: expected 0x%.8lx, actual 0x%.8lx\n",
(ulong)&start[offset], pattern, temp);
errs++;
if (ctrlc()) {
putc ('\n');
return 1;
}
}
}
start[test_offset] = pattern;
}
/*
* Description: Test the integrity of a physical
* memory device by performing an
* increment/decrement test over the
* entire region. In the process every
* storage bit in the device is tested
* as a zero and a one. The base address
* and the size of the region are
* selected by the caller.
*
* Returns: 0 if the test succeeds, 1 if the test fails.
*/
num_words = ((ulong)end - (ulong)start)/sizeof(vu_long) + 1;
/*
* Fill memory with a known pattern.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
WATCHDOG_RESET();
start[offset] = pattern;
}
/*
* Check each location and invert it for the second pass.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
WATCHDOG_RESET();
temp = start[offset];
if (temp != pattern) {
printf ("\nFAILURE (read/write) @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
(ulong)&start[offset], pattern, temp);
errs++;
if (ctrlc()) {
putc ('\n');
return 1;
}
}
anti_pattern = ~pattern;
start[offset] = anti_pattern;
}
/*
* Check each location for the inverted pattern and zero it.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
WATCHDOG_RESET();
anti_pattern = ~pattern;
temp = start[offset];
if (temp != anti_pattern) {
printf ("\nFAILURE (read/write): @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
(ulong)&start[offset], anti_pattern, temp);
errs++;
if (ctrlc()) {
putc ('\n');
return 1;
}
}
start[offset] = 0;
}
}
#else /* The original, quickie test */
incr = 1;
for (;;) {
if (ctrlc()) {
putc ('\n');
return 1;
}
if (iteration_limit && iterations > iteration_limit) {
printf("Tested %d iteration(s) with %lu errors.\n",
iterations-1, errs);
return errs != 0;
printf ("\rPattern %08lX Writing..."
"%12s"
"\b\b\b\b\b\b\b\b\b\b",
pattern, "");
for (addr=start,val=pattern; addr<end; addr++) {
WATCHDOG_RESET();
WATCHDOG_RESET();
readback = *addr;
if (readback != val) {
printf ("\nMem error @ 0x%08X: "
"found %08lX, expected %08lX\n",
(uint)(uintptr_t)addr, readback, val);
errs++;
if (ctrlc()) {
putc ('\n');
return 1;
}
}
val += incr;
}
/*
* Flip the pattern each time to make lots of zeros and
* then, the next time, lots of ones. We decrement
* the "negative" patterns and increment the "positive"
* patterns to preserve this feature.
*/
if(pattern & 0x80000000) {
pattern = -pattern; /* complement & increment */
}
else {
pattern = ~pattern;
}
incr = -incr;
}
#endif
return 0; /* not reached */
}
/* Modify memory.
*
* Syntax:
* mm{.b, .w, .l} {addr}
* nm{.b, .w, .l} {addr}
*/
static int
mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
ulong addr, i;
int nbytes, size;
if (argc != 2)
return cmd_usage(cmdtp);
#ifdef CONFIG_BOOT_RETRY_TIME
reset_cmd_timeout(); /* got a good command to get here */
#endif
/* We use the last specified parameters, unless new ones are
* entered.
*/
addr = mm_last_addr;
size = mm_last_size;
if ((flag & CMD_FLAG_REPEAT) == 0) {
/* New command specified. Check for a size specification.
* Defaults to long if no or incorrect specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
/* Address is specified since argc > 1
*/
addr = simple_strtoul(argv[1], NULL, 16);
addr += base_address;
}
#ifdef CONFIG_HAS_DATAFLASH
if (addr_dataflash(addr)){
puts ("Can't modify DataFlash in place. Use cp instead.\n\r");
return 0;
}
#endif
#ifdef CONFIG_BLACKFIN
if (addr_bfin_on_chip_mem(addr)) {
puts ("Can't modify L1 instruction in place. Use cp instead.\n\r");
return 0;
}
#endif
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
/* Print the address, followed by value. Then accept input for
* the next value. A non-converted value exits.
*/
do {
printf("%08lx:", addr);
if (size == 4)
printf(" %08x", *((uint *)addr));
else if (size == 2)
printf(" %04x", *((ushort *)addr));
else
printf(" %02x", *((u_char *)addr));
nbytes = readline (" ? ");
if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
/* <CR> pressed as only input, don't modify current
* location and move to next. "-" pressed will go back.
*/
if (incrflag)
addr += nbytes ? -size : size;
nbytes = 1;
#ifdef CONFIG_BOOT_RETRY_TIME
reset_cmd_timeout(); /* good enough to not time out */
#endif
}
#ifdef CONFIG_BOOT_RETRY_TIME
else if (nbytes == -2) {
break; /* timed out, exit the command */
}
#endif
else {
char *endp;
i = simple_strtoul(console_buffer, &endp, 16);
nbytes = endp - console_buffer;
if (nbytes) {
#ifdef CONFIG_BOOT_RETRY_TIME
/* good enough to not time out
*/
reset_cmd_timeout();
#endif
if (size == 4)
*((uint *)addr) = i;
else if (size == 2)
*((ushort *)addr) = i;
else
*((u_char *)addr) = i;
if (incrflag)
addr += size;
}
}
} while (nbytes);
mm_last_addr = addr;
mm_last_size = size;
return 0;
}
#ifndef CONFIG_CRC32_VERIFY
int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ulong addr, length;
ulong crc;
ulong *ptr;
if (argc < 3)
return cmd_usage(cmdtp);
addr = simple_strtoul (argv[1], NULL, 16);
length = simple_strtoul (argv[2], NULL, 16);
crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32);
addr, addr + length - 1, crc);
if (argc > 3) {
ptr = (ulong *) simple_strtoul (argv[3], NULL, 16);
*ptr = crc;
}
#else /* CONFIG_CRC32_VERIFY */
int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, length;
ulong crc;
ulong *ptr;
char * const *av;
usage:
return cmd_usage(cmdtp);
}
av = argv + 1;
ac = argc - 1;
if (strcmp(*av, "-v") == 0) {
verify = 1;
av++;
ac--;
if (ac < 3)
goto usage;
} else
verify = 0;
addr = simple_strtoul(*av++, NULL, 16);
addr += base_address;
length = simple_strtoul(*av++, NULL, 16);
crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32);
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
if (!verify) {
printf ("CRC32 for %08lx ... %08lx ==> %08lx\n",
addr, addr + length - 1, crc);
if (ac > 2) {
ptr = (ulong *) simple_strtoul (*av++, NULL, 16);
*ptr = crc;
}
} else {
vcrc = simple_strtoul(*av++, NULL, 16);
if (vcrc != crc) {
printf ("CRC32 for %08lx ... %08lx ==> %08lx != %08lx ** ERROR **\n",
addr, addr + length - 1, crc, vcrc);
return 1;
}
}
return 0;
}
#endif /* CONFIG_CRC32_VERIFY */
"memory modify (auto-incrementing address)",
"[.b, .w, .l] address"
#ifndef CONFIG_CRC32_VERIFY
"address count [addr]\n - compute CRC32 checksum [save at addr]"
#else /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
"-v address count crc\n - verify crc of memory area"
);
#endif /* CONFIG_CRC32_VERIFY */
"base off\n - set address offset for memory commands to 'off'"
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
"[.b, .w, .l] address number_of_objects data_to_write"
);
#endif /* CONFIG_LOOPW */
"simple RAM read/write test",
"[start [end [pattern [iterations]]]]"
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
);
U_BOOT_CMD(
);
#endif /* CONFIG_MX_CYCLIC */