The check for sandbox architecture is too early in the Makefile, so
standalone and api are built regardless. This moves the check until
after autoconf.mk has been read.

This fixes a build breakage.

Signed-off-by: Simon Glass <sjg@chromium.org>

This file is required by the new DMA buffer alignment macro.

Signed-off-by: Anton Staaf <robotboy@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>

U-Boot Makefiles contain a number of tests for compiler features etc.
which so far are executed again and again.  On some architectures
(especially ARM) this results in a large number of calls to gcc.

This patch makes sure to run such tests only once, thus largely
reducing the number of "execve" system calls.

Example: number of "execve" system calls for building the "P2020DS"
(Power Architecture) and "qong" (ARM) boards, measured as:
	-> strace -f -e trace=execve -o /tmp/foo ./MAKEALL <board>
	-> grep execve /tmp/foo | wc -l

	Before: After:	Reduction:
==================================
P2020DS 20555	15205	-26%
qong	31692	14490	-54%

As a result, built times are significantly reduced, typically by
30...50%.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Albert Aribaud <albert.aribaud@free.fr>
cc: Graeme Russ <graeme.russ@gmail.com>
cc: Mike Frysinger <vapier@gentoo.org>
Tested-by: Graeme Russ <graeme.russ@gmail.com>
Tested-by: Matthias Weisser <weisserm@arcor.de>
Tested-by: Sanjeev Premi <premi@ti.com>
Tested-by: Simon Glass <sjg@chromium.org>
Tested-by: Macpaul Lin <macpaul@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>

Fix:
post.c: In function 'post_log':
post.c:425:7: warning: variable 'i' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

Make checkpatch-clean..

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

Fix:
cmd_ide.c: In function 'ide_ident':
cmd_ide.c:988:6: warning: variable 'do_retry' set but not used
[-Wunused-but-set-variable]

Delete the unused variable.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Make file acceptable to checkpatch.

This is only a basic clean up to the extend possible without any real
changes to the source code. Warnings due to line over 80 characters
were accepted because these affect only printf()s with user visible
strings.  No attempts were made to fix warnings about volatile and
externs - these need a more thorough cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Fix:
ds1337.c: In function 'rtc_get':
ds1337.c:88:52: warning: variable 'control' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

Fix:
4xx_pci.c: In function 'pci_init_board':
4xx_pci.c:855:6: warning: variable 'busno' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Acked-by: Stefan Roese <sr@denx.de>

Fix:
mv_eth.c: In function 'mv64460_eth_real_open':
mv_eth.c:471:6: warning: variable 'port_status' set but not used [-Wunused-but-set-variable]
mv_eth.c: In function 'mv64460_eth_stop':
mv_eth.c:722:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable]
mv_eth.c: In function 'mv64460_eth_xmit':
mv_eth.c:796:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable]
mv_eth.c: In function 'mv64460_eth_receive':
mv_eth.c:877:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable]
mv_eth.c: In function 'mv64460_eth_get_stats':
mv_eth.c:979:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable]
mv_eth.c: In function 'mv64460_eth_update_stat':
mv_eth.c:1006:24: warning: variable 'dummy' set but not used [-Wunused-but-set-variable]
mv_eth.c:1005:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable]
mv_eth.c: In function 'mv64460_eth_print_stat':
mv_eth.c:1087:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable]
mv_eth.c: In function 'eth_clear_mib_counters':
mv_eth.c:2141:15: warning: variable 'dummy' set but not used [-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

Fix:
4xx_enet.c: In function 'enet_rcv':
4xx_enet.c:1772:21: warning: variable 'ef_ptr' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>

Fix:
4xx_uart.c: In function 'get_serial_clock':
4xx_uart.c:204:6: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>

Fix:
eepro100.c: In function 'read_hw_addr':
eepro100.c:926:6: warning: variable 'eeprom' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

Fix:
strataflash.c: In function 'flash_write_cfiword':
strataflash.c:669:11: warning: variable 'ctladdr' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>

Fix:
flash.c: In function 'flash_erase':
flash.c:304:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]

In addition, remove some dead code.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Fix:
ns8382x.c: In function 'ns8382x_check_duplex':
ns8382x.c:704:6: warning: variable 'hun' set but not used
[-Wunused-but-set-variable]

To fix this, we get rid of the NS8382X_DEBUG code and use standard
debug() instead.

This will now trigger a so far undetected warning:
ns8382x.c:780:2: warning: format '%X' expects argument of type
'unsigned int', but argument 2 has type 'long unsigned int' [-Wformat]

Fix that, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Commit 1272592e "powerpc: Use getenv_ulong() in place of getenv(),
strtoul" instroduced a build warning for some PPC systems:

board.c: In function 'board_init_r':
board.c:626: warning: unused variable 's'

Fix it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

* 'master' of git://git.denx.de/u-boot-mmc:
  tegra2: Move MMC clock initialization into MMC driver
  mmc: sdhci: fix sdma bug for large file transfer
  mmc: sdhci: add timeout for data transfer
  mmc: sdhci: add mmc structure for host
  mmc: sdhci: fix build warning
  mmc: sdhci: fix cache flush
  mmc: CMD7:MMC_CMD_SELECT_CARD response fix
  mmc: test mmc bus width on startup
  mmc: change magic number to macro define
  mmc: mv_sdhci: fix 8bus width access for 88SV331xV5
  mmc: retry the cmd8 to meet 74 clocks requirement in the spec
  PXA: Add MMC driver using the generic MMC framework

* 'master' of git://git.denx.de/u-boot-x86:
  x86: Fix a compiler warning in arch/x86/lib/realmode.c
  x86: Remove the prototype for the unused function board_init
  x86: Rename include/asm/ic to include/asm/arch-sc520
  x86: turn off cache: set control register properly

* 'master' of git://git.denx.de/u-boot-nds32:
  nds32: asm/io.h: add __iormb __iowmb and inline io support
  nds32: cache: define ARCH_DMA_MINALIGN for DMA buffer alignment
  nds32: Use getenv_ulong() in place of getenv(), strtoul

Commit 114d7fc0 "e1000: Rewrite EEPROM checksum error to give more
information" failed to initialize the checksum variable which should
result in random results. Fix that.

Commit 2326a94d caused a ton of "unused variable 'x'" warnings.
Fix these.  While we are at it, remove some bogus parens.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>

This centralizes knowledge of MMC clocking into the MMC driver. This also
removes clock setup from the board files, which will simplify later changes
that modify the Harmony board to support the correct set of MMC controllers.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cc: Andy Fleming <afleming@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>

SDHCI spec need to reset the sdma base address while the software
try to accorss the 512k bytes address boundary. When meet such
accross behavior, sdhci controller would generate a interrupt
automatically, and software need handle this.

Signed-off-by: Lei Wen <leiwen@marvell.com>

Signed-off-by: Lei Wen <leiwen@marvell.com>

So that sdhci host would tell in the driver that the mmc current
attributes.

Signed-off-by: Lei Wen <leiwen@marvell.com>

If CONFIG_MMC_SDHCI_IO_ACCESSORS is defined, the following warning would
shows up:

include/sdhci.h:224: warning: 'struct sdhci_host' declared inside
parameter list
include/sdhci.h:224: warning: its scope is only this definition or
declaration, which is probably not what you want
include/sdhci.h:225: warning: 'struct sdhci_host' declared inside
parameter list
include/sdhci.h:226: warning: 'struct sdhci_host' declared inside
parameter list
include/sdhci.h:227: warning: 'struct sdhci_host' declared inside
parameter list
include/sdhci.h:228: warning: 'struct sdhci_host' declared inside
parameter list
include/sdhci.h:229: warning: 'struct sdhci_host' declared inside
parameter list

Signed-off-by: Lei Wen <leiwen@marvell.com>

Only flush the memory range needed.

Signed-off-by: Lei Wen <leiwen@marvell.com>

As per JEDEC document JESD84-A441 (page 105) response for CMD7
(MMC_CMD_SELECT_CARD) response should be R1 instead of R1b. In uboot we
never take MMC to disconnected state and on powerup its always ideal
state which later goes to stand-by state.

from document footnote:
R1 while selecting from Stand-By State to Transfer State; R1b while
selecting from Disconnected State to Programming State.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>

For we don't know mmc bus width from reading registers, the only way
to check is to test.

Current compare offset is:
EXT_CSD_PARTITIONING_SUPPORT
EXT_CSD_ERASE_GROUP_DEF
EXT_CSD_REV
EXT_CSD_HC_ERASE_GRP_SIZE
EXT_CSD_SEC_CNT

Signed-off-by: Lei Wen <leiwen@marvell.com>

Previous magic number is hard to parse its meaning, change it to
respective macro definition

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: WOlfgang Denk <wd@denx.de>

Marvell 88SV331xV5 platform's sdhci host control is not very standard
with the spec in the 8bit handling. It need to set its private register
to switch to the 8bit mode which is not included in the standard sdhci
registers.

This patch mainly hacks the writeb method, and set its private register
if it find the driver is going to switch to the 8bit mode.

Signed-off-by: Lei Wen <leiwen@marvell.com>

For some controller it has dynamic clock gating, and only toggle out clk
when the first cmd0 send out, while some card strictly obey the 74
clocks rule, the interval may not be sufficient between the cmd0 and
this cmd8, retry to fulfil the clock requirement.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Ensure that the value being passed to a %d format specifier is of type
int.

Signed-off-by: Gabe Black <gabeblack@chromium.org>

Signed-off-by: Gabe Black <gabeblack@chromium.org>

Also include some trivial related cleanups

Bits should be ORed when they are supposed to be added together

Signed-off-by: Ondrej Kupka <ondra.cap@gmail.com>

1. This patch add required __iormb and __iowmb to io.h.
   This also fix some misbehavior to periphal drivers.
   This io.h has been fixed with referencing arm/include/asm/io.h.
2. This patch replaced macro writeb and readb into inline function.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

Add ARCH_DMA_MINALIGN definition to asm/cache.h

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

This changes the board code to use the new getenv_ulong() function.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>