Skip to content
Snippets Groups Projects
at91_gpio.c 11.5 KiB
Newer Older
  • Learn to ignore specific revisions
  • Jens Scharsig's avatar
    Jens Scharsig committed
    /*
    
     * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
    
    Jens Scharsig's avatar
    Jens Scharsig committed
     *
     * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
     *
     *  Copyright (C) 2005 HP Labs
     *
    
     * SPDX-License-Identifier:	GPL-2.0+
    
    Jens Scharsig's avatar
    Jens Scharsig committed
     */
    
    #include <config.h>
    #include <common.h>
    
    #include <linux/sizes.h>
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    #include <asm/arch/hardware.h>
    #include <asm/arch/at91_pio.h>
    
    static struct at91_port *at91_pio_get_port(unsigned port)
    {
    	switch (port) {
    	case AT91_PIO_PORTA:
    		return (struct at91_port *)ATMEL_BASE_PIOA;
    	case AT91_PIO_PORTB:
    		return (struct at91_port *)ATMEL_BASE_PIOB;
    	case AT91_PIO_PORTC:
    		return (struct at91_port *)ATMEL_BASE_PIOC;
    #if (ATMEL_PIO_PORTS > 3)
    	case AT91_PIO_PORTD:
    		return (struct at91_port *)ATMEL_BASE_PIOD;
    #if (ATMEL_PIO_PORTS > 4)
    	case AT91_PIO_PORTE:
    		return (struct at91_port *)ATMEL_BASE_PIOE;
    #endif
    #endif
    	default:
    
    		printf("Error: at91_gpio: Fail to get PIO base!\n");
    
    static void at91_set_port_pullup(struct at91_port *at91_port, unsigned offset,
    				 int use_pullup)
    {
    	u32 mask;
    
    	mask = 1 << offset;
    	if (use_pullup)
    		writel(mask, &at91_port->puer);
    	else
    		writel(mask, &at91_port->pudr);
    	writel(mask, &at91_port->per);
    }
    
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    
    #if defined(CPU_HAS_PIO3)
    	if (use_pullup)
    		at91_set_pio_pulldown(port, pin, 0);
    #endif
    
    
    	if (at91_port && (pin < GPIO_PER_BANK))
    		at91_set_port_pullup(at91_port, pin, use_pullup);
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    	return 0;
    }
    
    /*
     * mux the pin to the "GPIO" peripheral role.
     */
    int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    		mask = 1 << pin;
    
    		writel(mask, &at91_port->idr);
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    		at91_set_pio_pullup(port, pin, use_pullup);
    
    		writel(mask, &at91_port->per);
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    	return 0;
    }
    
    /*
     * mux the pin to the "A" internal peripheral role.
     */
    int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    		mask = 1 << pin;
    
    		writel(mask, &at91_port->idr);
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    		at91_set_pio_pullup(port, pin, use_pullup);
    
    #if defined(CPU_HAS_PIO3)
    
    		writel(readl(&at91_port->abcdsr1) & ~mask,
    		       &at91_port->abcdsr1);
    		writel(readl(&at91_port->abcdsr2) & ~mask,
    		       &at91_port->abcdsr2);
    
    		writel(mask, &at91_port->asr);
    
    		writel(mask, &at91_port->pdr);
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    	return 0;
    }
    
    /*
     * mux the pin to the "B" internal peripheral role.
     */
    int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    		mask = 1 << pin;
    
    		writel(mask, &at91_port->idr);
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    		at91_set_pio_pullup(port, pin, use_pullup);
    
    #if defined(CPU_HAS_PIO3)
    
    		writel(readl(&at91_port->abcdsr1) | mask,
    		       &at91_port->abcdsr1);
    		writel(readl(&at91_port->abcdsr2) & ~mask,
    		       &at91_port->abcdsr2);
    
    		writel(mask, &at91_port->bsr);
    
    		writel(mask, &at91_port->pdr);
    
    #if defined(CPU_HAS_PIO3)
    /*
     * mux the pin to the "C" internal peripheral role.
     */
    int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    		writel(mask, &at91_port->idr);
    
    		at91_set_pio_pullup(port, pin, use_pullup);
    
    		writel(readl(&at91_port->abcdsr1) & ~mask,
    		       &at91_port->abcdsr1);
    		writel(readl(&at91_port->abcdsr2) | mask,
    		       &at91_port->abcdsr2);
    		writel(mask, &at91_port->pdr);
    
    	return 0;
    }
    
    /*
     * mux the pin to the "D" internal peripheral role.
     */
    int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    		writel(mask, &at91_port->idr);
    
    		at91_set_pio_pullup(port, pin, use_pullup);
    
    		writel(readl(&at91_port->abcdsr1) | mask,
    		       &at91_port->abcdsr1);
    		writel(readl(&at91_port->abcdsr2) | mask,
    		       &at91_port->abcdsr2);
    		writel(mask, &at91_port->pdr);
    
    #ifdef CONFIG_DM_GPIO
    static bool at91_get_port_output(struct at91_port *at91_port, int offset)
    {
    	u32 mask, val;
    
    	mask = 1 << offset;
    	val = readl(&at91_port->osr);
    	return val & mask;
    }
    #endif
    
    static void at91_set_port_input(struct at91_port *at91_port, int offset,
    				int use_pullup)
    {
    	u32 mask;
    
    	mask = 1 << offset;
    	writel(mask, &at91_port->idr);
    	at91_set_port_pullup(at91_port, offset, use_pullup);
    	writel(mask, &at91_port->odr);
    	writel(mask, &at91_port->per);
    }
    
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    /*
     * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
     * configure it for an input.
     */
    int at91_set_pio_input(unsigned port, u32 pin, int use_pullup)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    
    	if (at91_port && (pin < GPIO_PER_BANK))
    		at91_set_port_input(at91_port, pin, use_pullup);
    
    static void at91_set_port_output(struct at91_port *at91_port, int offset,
    				 int value)
    {
    	u32 mask;
    
    	mask = 1 << offset;
    	writel(mask, &at91_port->idr);
    	writel(mask, &at91_port->pudr);
    	if (value)
    		writel(mask, &at91_port->sodr);
    	else
    		writel(mask, &at91_port->codr);
    	writel(mask, &at91_port->oer);
    	writel(mask, &at91_port->per);
    }
    
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    /*
     * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
     * and configure it for an output.
     */
    int at91_set_pio_output(unsigned port, u32 pin, int value)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    
    	if (at91_port && (pin < GPIO_PER_BANK))
    		at91_set_port_output(at91_port, pin, value);
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    	return 0;
    }
    
    /*
     * enable/disable the glitch filter. mostly used with IRQ handling.
     */
    int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    		mask = 1 << pin;
    
    		if (is_on) {
    #if defined(CPU_HAS_PIO3)
    
    			writel(mask, &at91_port->ifscdr);
    
    			writel(mask, &at91_port->ifer);
    
    			writel(mask, &at91_port->ifdr);
    
    	return 0;
    }
    
    #if defined(CPU_HAS_PIO3)
    /*
     * enable/disable the debounce filter.
     */
    int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    		mask = 1 << pin;
    		if (is_on) {
    
    			writel(mask, &at91_port->ifscer);
    			writel(div & PIO_SCDR_DIV, &at91_port->scdr);
    			writel(mask, &at91_port->ifer);
    
    			writel(mask, &at91_port->ifdr);
    
    	return 0;
    }
    
    /*
     * enable/disable the pull-down.
     * If pull-up already enabled while calling the function, we disable it.
     */
    int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    		if (is_on) {
    			at91_set_pio_pullup(port, pin, 0);
    
    			writel(mask, &at91_port->ppder);
    
    			writel(mask, &at91_port->ppddr);
    
    	return 0;
    }
    
    /*
     * disable Schmitt trigger
     */
    int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    		writel(readl(&at91_port->schmitt) | mask,
    		       &at91_port->schmitt);
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    	return 0;
    }
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    
    /*
     * enable/disable the multi-driver. This is only valid for output and
     * allows the output pin to run as an open collector output.
     */
    int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    	u32 mask;
    
    	if (at91_port && (pin < GPIO_PER_BANK)) {
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    		mask = 1 << pin;
    		if (is_on)
    
    			writel(mask, &at91_port->mder);
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    		else
    
    			writel(mask, &at91_port->mddr);
    
    static void at91_set_port_value(struct at91_port *at91_port, int offset,
    				int value)
    {
    	u32 mask;
    
    	mask = 1 << offset;
    	if (value)
    		writel(mask, &at91_port->sodr);
    	else
    		writel(mask, &at91_port->codr);
    }
    
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    /*
     * assuming the pin is muxed as a gpio output, set its value.
     */
    int at91_set_pio_value(unsigned port, unsigned pin, int value)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    
    	if (at91_port && (pin < GPIO_PER_BANK))
    		at91_set_port_value(at91_port, pin, value);
    
    static int at91_get_port_value(struct at91_port *at91_port, int offset)
    {
    	u32 pdsr = 0, mask;
    
    	mask = 1 << offset;
    	pdsr = readl(&at91_port->pdsr) & mask;
    
    	return pdsr != 0;
    }
    
    Jens Scharsig's avatar
    Jens Scharsig committed
    /*
     * read the pin's value (works even if it's not muxed as a gpio).
     */
    int at91_get_pio_value(unsigned port, unsigned pin)
    {
    
    	struct at91_port *at91_port = at91_pio_get_port(port);
    
    	if (at91_port && (pin < GPIO_PER_BANK))
    		return at91_get_port_value(at91_port, pin);
    
    /* Common GPIO API */
    
    int gpio_request(unsigned gpio, const char *label)
    {
    	return 0;
    }
    
    int gpio_free(unsigned gpio)
    {
    	return 0;
    }
    
    int gpio_direction_input(unsigned gpio)
    {
    	at91_set_pio_input(at91_gpio_to_port(gpio),
    			   at91_gpio_to_pin(gpio), 0);
    	return 0;
    }
    
    int gpio_direction_output(unsigned gpio, int value)
    {
    	at91_set_pio_output(at91_gpio_to_port(gpio),
    			    at91_gpio_to_pin(gpio), value);
    	return 0;
    }
    
    int gpio_get_value(unsigned gpio)
    {
    	return at91_get_pio_value(at91_gpio_to_port(gpio),
    				  at91_gpio_to_pin(gpio));
    }
    
    int gpio_set_value(unsigned gpio, int value)
    {
    	at91_set_pio_value(at91_gpio_to_port(gpio),
    			   at91_gpio_to_pin(gpio), value);
    
    	return 0;
    }
    
    #endif
    
    #ifdef CONFIG_DM_GPIO
    
    struct at91_port_priv {
    	struct at91_port *regs;
    };
    
    /* set GPIO pin 'gpio' as an input */
    static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
    {
    
    	struct at91_port_priv *port = dev_get_priv(dev);
    
    
    	at91_set_port_input(port->regs, offset, 0);
    
    	return 0;
    }
    
    /* set GPIO pin 'gpio' as an output, with polarity 'value' */
    static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
    				       int value)
    {
    
    	struct at91_port_priv *port = dev_get_priv(dev);
    
    
    	at91_set_port_output(port->regs, offset, value);
    
    	return 0;
    }
    
    /* read GPIO IN value of pin 'gpio' */
    static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
    {
    
    	struct at91_port_priv *port = dev_get_priv(dev);
    
    
    	return at91_get_port_value(port->regs, offset);
    }
    
    /* write GPIO OUT value to pin 'gpio' */
    static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
    			       int value)
    {
    
    	struct at91_port_priv *port = dev_get_priv(dev);
    
    
    	at91_set_port_value(port->regs, offset, value);
    
    	return 0;
    }
    
    static int at91_gpio_get_function(struct udevice *dev, unsigned offset)
    {
    
    	struct at91_port_priv *port = dev_get_priv(dev);
    
    
    	/* GPIOF_FUNC is not implemented yet */
    	if (at91_get_port_output(port->regs, offset))
    		return GPIOF_OUTPUT;
    	else
    		return GPIOF_INPUT;
    }
    
    static const struct dm_gpio_ops gpio_at91_ops = {
    	.direction_input	= at91_gpio_direction_input,
    	.direction_output	= at91_gpio_direction_output,
    	.get_value		= at91_gpio_get_value,
    	.set_value		= at91_gpio_set_value,
    	.get_function		= at91_gpio_get_function,
    };
    
    static int at91_gpio_probe(struct udevice *dev)
    {
    	struct at91_port_priv *port = dev_get_priv(dev);
    	struct at91_port_platdata *plat = dev_get_platdata(dev);
    
    	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
    
    
    	uc_priv->bank_name = plat->bank_name;
    	uc_priv->gpio_count = GPIO_PER_BANK;
    	port->regs = (struct at91_port *)plat->base_addr;
    
    	return 0;
    }
    
    U_BOOT_DRIVER(gpio_at91) = {
    	.name	= "gpio_at91",
    	.id	= UCLASS_GPIO,
    	.ops	= &gpio_at91_ops,
    	.probe	= at91_gpio_probe,
    	.priv_auto_alloc_size = sizeof(struct at91_port_priv),
    };
    #endif