targets: Remove old call to add_spi_flash on targets now using LiteSPI (we'll find it with gitk is required).

Add option for different Fomu SPI ICs.

Signed-off-by: Joey Bushagour <jbushagour@google.com>

This is now required since ECP5PLL now checks that PFD is in required range.

Keep the old add_spi_flash call commented for now just in case we need to compare/test it.

Already better regarding resource usage:
Info: 	         ICESTORM_LC:  2938/ 5280    55%
Info: 	        ICESTORM_RAM:     2/   30     6%
Info: 	               SB_IO:    15/   96    15%
Info: 	               SB_GB:     8/    8   100%
Info: 	        ICESTORM_PLL:     1/    1   100%
Info: 	         SB_WARMBOOT:     0/    1     0%
Info: 	        ICESTORM_DSP:     0/    8     0%
Info: 	      ICESTORM_HFOSC:     0/    1     0%
Info: 	      ICESTORM_LFOSC:     0/    1     0%
Info: 	              SB_I2C:     0/    2     0%
Info: 	              SB_SPI:     0/    2     0%
Info: 	              IO_I3C:     0/    2     0%
Info: 	         SB_LEDDA_IP:     0/    1     0%
Info: 	         SB_RGBA_DRV:     0/    1     0%
Info: 	      ICESTORM_SPRAM:     4/    4   100%

Requires https://github.com/enjoy-digital/litex/commit/80e9d2cea9198b38f62a68bc420328222b3b6709

Already better regarding resource usage:

Info: 	         ICESTORM_LC:  2358/ 5280    44%
Info: 	        ICESTORM_RAM:     2/   30     6%
Info: 	               SB_IO:    15/   96    15%
Info: 	               SB_GB:     8/    8   100%
Info: 	        ICESTORM_PLL:     1/    1   100%
Info: 	         SB_WARMBOOT:     0/    1     0%
Info: 	        ICESTORM_DSP:     0/    8     0%
Info: 	      ICESTORM_HFOSC:     0/    1     0%
Info: 	      ICESTORM_LFOSC:     0/    1     0%
Info: 	              SB_I2C:     0/    2     0%
Info: 	              SB_SPI:     0/    2     0%
Info: 	              IO_I3C:     0/    2     0%
Info: 	         SB_LEDDA_IP:     0/    1     0%
Info: 	         SB_RGBA_DRV:     0/    1     0%
Info: 	      ICESTORM_SPRAM:     4/    4   100%

We can still try to reduce it, but enabling Master should not use that much LCs.

Both XiP from SPI(1X) or QSPI(4X) are working, but resource usage is currently
too high to be able to switch to it by default. We'll first try to reduce it.

Resource usage using SPI(1X) and actual LiteX SPI Flash core:
Info: Device utilisation:
Info: 	         ICESTORM_LC:  2016/ 5280    38%
Info: 	        ICESTORM_RAM:     2/   30     6%
Info: 	               SB_IO:    15/   96    15%
Info: 	               SB_GB:     8/    8   100%
Info: 	        ICESTORM_PLL:     1/    1   100%
Info: 	         SB_WARMBOOT:     0/    1     0%
Info: 	        ICESTORM_DSP:     0/    8     0%
Info: 	      ICESTORM_HFOSC:     0/    1     0%
Info: 	      ICESTORM_LFOSC:     0/    1     0%
Info: 	              SB_I2C:     0/    2     0%
Info: 	              SB_SPI:     0/    2     0%
Info: 	              IO_I3C:     0/    2     0%
Info: 	         SB_LEDDA_IP:     0/    1     0%
Info: 	         SB_RGBA_DRV:     0/    1     0%
Info: 	      ICESTORM_SPRAM:     4/    4   100%


Resource usage using LiteSPI:
Info: Device utilisation:
Info: 	         ICESTORM_LC:  3964/ 5280    75%
Info: 	        ICESTORM_RAM:     2/   30     6%
Info: 	               SB_IO:    15/   96    15%
Info: 	               SB_GB:     8/    8   100%
Info: 	        ICESTORM_PLL:     1/    1   100%
Info: 	         SB_WARMBOOT:     0/    1     0%
Info: 	        ICESTORM_DSP:     0/    8     0%
Info: 	      ICESTORM_HFOSC:     0/    1     0%
Info: 	      ICESTORM_LFOSC:     0/    1     0%
Info: 	              SB_I2C:     0/    2     0%
Info: 	              SB_SPI:     0/    2     0%
Info: 	              IO_I3C:     0/    2     0%
Info: 	         SB_LEDDA_IP:     0/    1     0%
Info: 	         SB_RGBA_DRV:     0/    1     0%
Info: 	      ICESTORM_SPRAM:     4/    4   100%

add FPGA Boards (Digilent CMOD A7, Digilent Nexys 4, Micronova Mercury2)

muselab_icesugar_pro: initial support

Basys3: Invert reset button, so that the board is reset when btnc is pushed.

trenz_tec0117: Add SDCard (SPI and SD mode), move SPI Flash to 0x00000000 and use default l2_cache_min_data_width.