Select Git revision
siglent_sds1104xe.py
siglent_sds1104xe.py 9.00 KiB
#!/usr/bin/env python3
#
# This file is part of LiteX-Boards.
#
# Copyright (c) 2020 Florent Kermarrec <florent@enjoy-digital.fr>
# SPDX-License-Identifier: BSD-2-Clause
# Build/Use ----------------------------------------------------------------------------------------
# Build/Load bitstream:
# ./siglent_ds1104xe.py --with-etherbone --uart-name=crossover --csr-csv=csr.csv --build --load
#
# Test Ethernet:
# ping 192.168.1.50
#
# Test Console:
# litex_server --udp
# litex_term crossover
# --------------------------------------------------------------------------------------------------
import os
import argparse
from migen import *
from litex_boards.platforms import sds1104xe
from litex.build.xilinx.vivado import vivado_build_args, vivado_build_argdict
from litex.soc.cores.clock import *
from litex.soc.integration.soc_core import *
from litex.soc.integration.builder import *
from litex.soc.cores.video import VideoVGAPHY
from litedram.modules import MT41K64M16
from litedram.phy import s7ddrphy
from liteeth.phy.mii import LiteEthPHYMII
# CRG ----------------------------------------------------------------------------------------------
class _CRG(Module):
def __init__(self, platform, sys_clk_freq, with_ethernet=False):
self.rst = Signal()
self.clock_domains.cd_sys = ClockDomain()
self.clock_domains.cd_sys4x = ClockDomain(reset_less=True)
self.clock_domains.cd_sys4x_dqs = ClockDomain(reset_less=True)
self.clock_domains.cd_idelay = ClockDomain()
self.clock_domains.cd_dvi = ClockDomain()
# # #
# Clk / Rst
clk25 = ClockSignal("eth_tx") if with_ethernet else platform.request("eth_clocks").rx
# PLL
self.submodules.pll = pll = S7PLL(speedgrade=-1)
pll.register_clkin(clk25, 25e6)
pll.create_clkout(self.cd_sys, sys_clk_freq)
pll.create_clkout(self.cd_sys4x, 4*sys_clk_freq)
pll.create_clkout(self.cd_sys4x_dqs, 4*sys_clk_freq, phase=90)
pll.create_clkout(self.cd_idelay, 200e6)
pll.create_clkout(self.cd_dvi, 33.3e6)
platform.add_false_path_constraints(self.cd_sys.clk, pll.clkin) # Ignore sys_clk to pll.clkin path created by SoC's rst.
self.submodules.idelayctrl = S7IDELAYCTRL(self.cd_idelay)
# BaseSoC ------------------------------------------------------------------------------------------
class BaseSoC(SoCCore):
def __init__(self, sys_clk_freq=int(100e6), with_etherbone=True, eth_ip="192.168.1.50", with_video_terminal=False, with_video_framebuffer=False, **kwargs):
platform = sds1104xe.Platform()
# SoCCore ----------------------------------------------------------------------------------
if kwargs.get("uart_name", "serial") == "serial":
kwargs["uart_name"] = "crossover" # Defaults to Crossover UART.
SoCCore.__init__(self, platform, sys_clk_freq,
ident = "LiteX SoC on Siglent SDS1104X-E",
ident_version = True,
**kwargs)
# CRG --------------------------------------------------------------------------------------
self.submodules.crg = _CRG(platform, sys_clk_freq, with_ethernet=with_etherbone)
# DDR3 SDRAM -------------------------------------------------------------------------------
if not self.integrated_main_ram_size:
self.submodules.ddrphy = s7ddrphy.A7DDRPHY(platform.request("ddram"),
memtype = "DDR3",
nphases = 4,
sys_clk_freq = sys_clk_freq)
self.add_sdram("sdram",
phy = self.ddrphy,
module = MT41K64M16(sys_clk_freq, "1:4"),
l2_cache_size = kwargs.get("l2_size", 8192),
l2_cache_reverse = False,
)
# Etherbone --------------------------------------------------------------------------------
if with_etherbone:
# FIXME: Simplify LiteEth Hybrid MAC integration.
from liteeth.common import convert_ip
from liteeth.mac import LiteEthMAC
from liteeth.core.arp import LiteEthARP
from liteeth.core.ip import LiteEthIP
from liteeth.core.udp import LiteEthUDP
from liteeth.core.icmp import LiteEthICMP
from liteeth.core import LiteEthUDPIPCore
from liteeth.frontend.etherbone import LiteEthEtherbone
# Ethernet PHY
self.submodules.ethphy = LiteEthPHYMII(
clock_pads = self.platform.request("eth_clocks"),
pads = self.platform.request("eth"))
etherbone_ip_address = convert_ip("192.168.1.51")
etherbone_mac_address = 0x10e2d5000001
# Ethernet MAC
self.submodules.ethmac = LiteEthMAC(phy=self.ethphy, dw=8,
interface = "hybrid",
endianness = self.cpu.endianness,
hw_mac = etherbone_mac_address)
# Software Interface.
self.add_memory_region("ethmac", getattr(self.mem_map, "ethmac", None), 0x2000, type="io")
self.add_wb_slave(self.mem_regions["ethmac"].origin, self.ethmac.bus, 0x2000)
if self.irq.enabled:
self.irq.add("ethmac", use_loc_if_exists=True)
# Hardware Interface.
self.submodules.arp = LiteEthARP(self.ethmac, etherbone_mac_address, etherbone_ip_address, sys_clk_freq, dw=8)
self.submodules.ip = LiteEthIP(self.ethmac, etherbone_mac_address, etherbone_ip_address, self.arp.table, dw=8)
self.submodules.icmp = LiteEthICMP(self.ip, etherbone_ip_address, dw=8)
self.submodules.udp = LiteEthUDP(self.ip, etherbone_ip_address, dw=8)
self.add_constant("ETH_PHY_NO_RESET") # Disable reset from BIOS to avoid disabling Hardware Interface.
# Etherbone
self.submodules.etherbone = LiteEthEtherbone(self.udp, 1234, mode="master")
self.add_wb_master(self.etherbone.wishbone.bus)
# Timing constraints
eth_rx_clk = self.ethphy.crg.cd_eth_rx.clk
eth_tx_clk = self.ethphy.crg.cd_eth_tx.clk
self.platform.add_period_constraint(eth_rx_clk, 1e9/self.ethphy.rx_clk_freq)
self.platform.add_period_constraint(eth_tx_clk, 1e9/self.ethphy.tx_clk_freq)
self.platform.add_false_path_constraints(self.crg.cd_sys.clk, eth_rx_clk, eth_tx_clk)
# Video ------------------------------------------------------------------------------------
video_timings = ("800x480@60Hz", {
"pix_clk" : 33.3e6,
"h_active" : 800,
"h_blanking" : 256,
"h_sync_offset" : 210,
"h_sync_width" : 1,
"v_active" : 480,
"v_blanking" : 45,
"v_sync_offset" : 22,
"v_sync_width" : 1,
})
if with_video_terminal or with_video_framebuffer:
self.submodules.videophy = VideoVGAPHY(platform.request("lcd"), clock_domain="dvi")
if with_video_terminal:
self.add_video_terminal(phy=self.videophy, timings=video_timings, clock_domain="dvi")
if with_video_framebuffer:
self.add_video_framebuffer(phy=self.videophy, timings=video_timings, clock_domain="dvi")
# Build --------------------------------------------------------------------------------------------
def main():
parser = argparse.ArgumentParser(description="LiteX SoC on SDS1104X-E")
parser.add_argument("--build", action="store_true", help="Build bitstream")
parser.add_argument("--load", action="store_true", help="Load bitstream")
parser.add_argument("--sys-clk-freq", default=100e6, help="System clock frequency (default: 100MHz)")
parser.add_argument("--with-etherbone", action="store_true", help="Enable Etherbone support")
parser.add_argument("--eth-ip", default="192.168.1.50", type=str, help="Ethernet/Etherbone IP address")
viopts = parser.add_mutually_exclusive_group()
viopts.add_argument("--with-video-terminal", action="store_true", help="Enable Video Terminal (HDMI)")
viopts.add_argument("--with-video-framebuffer", action="store_true", help="Enable Video Framebuffer (HDMI)")
builder_args(parser)
soc_core_args(parser)
vivado_build_args(parser)
args = parser.parse_args()
soc = BaseSoC(
sys_clk_freq = int(float(args.sys_clk_freq)),
with_etherbone = args.with_etherbone,
eth_ip = args.eth_ip,
with_video_terminal = args.with_video_terminal,
with_video_framebuffer = args.with_video_framebuffer,
**soc_core_argdict(args)
)
builder = Builder(soc, **builder_argdict(args))
builder.build(**vivado_build_argdict(args), run=args.build)
if args.load:
prog = soc.platform.create_programmer()
prog.load_bitstream(os.path.join(builder.gateware_dir, soc.build_name + ".bit"), device=1)
if __name__ == "__main__":
main()