- Aug 07, 2018
-
-
Troy Kisky authored
rc: correct AR8035 comments rc.h: CONFIG_IPUV3_CLK 264000000 rc: use nitrogen6x clocks.cfg/ddr-setup.cfg rc: add CONFIG_CMD_GPIO rc: explicit fbp_detect_i2c rc: verify port in board_ehci_hcd_init rc: use boundary.h rc: add CONFIG_SPI_FLASH_SPANSION rc: rc_defconfig add CONFIG_BLOCK_CACHE rc: use common code for eth init rc: eth.c now in common directory rc: move misc_init_r/do_kbd to common rc: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common rc: use common 800mhz_4x128mx16.cfg rc: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs rc: use common ddr script rc: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> rc: clocks.cfg: set IPU AXI bus priorities Signed-off-by:
Eric Nelson <eric@nelint.com> rc: update to v2017.01 rc: update to v2017.03 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
Troy Kisky authored
ls.h: CONFIG_IPUV3_CLK 264000000 ls: use nitrogen6x/ddr-setup.cfg ls: add CONFIG_CMD_GPIO ls: explicit fbp_detect_i2c ls: add wlmac ls: use boundary.h ls: add CONFIG_SPI_FLASH_SPANSION ls: ls_defconfig add CONFIG_BLOCK_CACHE ls: use common code for eth init ls: eth.c now in common directory ls: move misc_init_r/do_kbd to common ls: move max77823_init to common ls: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common ls: use common 1066mhz_4x256mx16.cfg ls: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs ls: use common ddr script ls: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> ls: update to v2017.01 ls: update to v2017.03 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
Troy Kisky authored
hp: add VD_AFK1024600A02 hp: add tx enable for rs485 hp: add CONFIG_SPI_FLASH_SPANSION hp: initialize otg network always hp: add hp_s512m_defconfig hp: hp_defconfig add CONFIG_BLOCK_CACHE hp_s512m: hp_s512m_defconfig add CONFIG_BLOCK_CACHE hp: add hp_q1g_defconfig hp: use common code for eth init hp: eth.c now in common directory hp: move misc_init_r/do_kbd to common hp: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common hp: use common 1066mhz_4x128mx16.cfg hp: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs hp: 800mhz_2x128mx16.cfg: remove _P1 accesses hp: 800mhz_2x128mx16.cfg: use common values CFG0: 0x40435323 to 0x3f435333 tRFC - 65 to 64 clocks tFAW - 19 to 20 clocks CFG1: 0xB66E8D63 to 0xb68e8b63 tRC from 20 to 21 clocks tWR from 7 to 6 clocks MR0: 0x13208030 to 0x15208030 tWR from 5 to 6 clocks hp: use common ddr scripts hp: check otg_power_detect before enabling otg_vbus hp: ensure otg cable not connected before allowing boot hp: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> hp: update to v2017.01 hp: update to v2017.03 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
Troy Kisky authored
hl: set wlmac for TiWi hl: use common code for eth init hl: eth.c now in common directory hl: move misc_init_r/do_kbd to common hl: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common hl: default to tm070jdhg30 instead of hannstar7 hl: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs hl: 800mhz_2x256mx16.cfg: remove _P1 accesses hl: 800mhz_2x256mx16.cfg: use common values MDCFG2: from 0x01FF0093 to 0x01FF00db tRTP - from 3 to 4 clocks (4 is minimum allowed) tWTR - from 3 to 4 clocks (4 is minimum allowed) MR0: from 0x13208030 to 0x15208030 tWR - from 5 to 6 clocks hl: use common ddr script hl: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com>
-
Troy Kisky authored
ap: forgot file include/configs/ap.h ap: ap_q2g_defconfig: add CONFIG_SPI_FLASH_GIGADEVICE ap: add bootscript_lp8860_eprom.txt ap: add verification to bootscript_lp8860_eprom.txt ap: use common ddr script ap: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com>
-
Gary Bisson authored
ys: update to v2017.01 ys: update to v2017.03 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com> ys: ys_1g_defconfig add CONFIG_BLOCK_CACHE ys_512m: ys_512m_defconfig add CONFIG_BLOCK_CACHE ys: use common code for eth init ys: eth.c now in common directory ys: move misc_init_r/do_kbd to common ys: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common ys: don't define CONFIG_CMD_FBPANEL, no display ys: keep GP_RESET_DSP_N high ys: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs ys: add CONFIG_SPI_FLASH_WINBOND ys: fix eMMC voltage vccq to allows 1.8V ys: add comment for ddr ys: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com>
-
Troy Kisky authored
a: add usb hub reset/uart3/uart4/flexcan pins a: keep USB Huawei Modem in reset a: add leds rx active/tx active a: remove printf of board_mmc_init a.h: add cmd_custom to avoid update u-boot warning a: add CONFIG_CMD_GPIO a: remove redundant CONFIG_CMD_GPIO a: verify port in board_ehci_hcd_init a: use boundary.h a: call preboot_keys a: add CONFIG_SPI_FLASH_SPANSION a: add RV4162 rtc on I2C2 a: a_defconfig add CONFIG_BLOCK_CACHE a: use common code for eth init a: eth.c now in common directory a: move misc_init_r/do_kbd to common a: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common a: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs a: add a_s512m.cfg a: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> a: update to v2017.01 a: update to v2017.03 a.h: add custom BOOT_TARGET_DEVICES priority Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
- Nov 09, 2017
-
-
Lukasz Majewski authored
This commit provides support for LWN's IMX6Q based DISPLAY5 board. Signed-off-by:
Lukasz Majewski <lukma@denx.de>
-