Signed-off-by: Tom Rini <trini@konsulko.com>

As part of 3457bbaf these configs didn't get updated.  Update them now.

Signed-off-by: Tom Rini <trini@konsulko.com>

Previously, ret could be used uninitialized if
blk_get_device_part_str() failed.  Default to ret being set to -1 so
that we always return an err up if we have a problem and then invert the
logic on testing ums_count as when that is non-zero is the time we can
return 0.

Cc: John Tobias <john.tobias.ph@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	configs/bcm28155_ap_defconfig
	configs/dra72_evm_defconfig
	configs/dra74_evm_defconfig
	configs/ma5d4evk_defconfig

Signed-off-by: Tom Rini <trini@konsulko.com>

And also reformat defconfigs using "make savedefconfig" rule.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

Description was borrowed from kernel dwc3 Kconfig.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some
config headers. This is also probably fixes am335x_baltos board.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and
make all UDC controllers select USB_GADGET_DUALSPEED:
  - add next options to Kconfig selecting USB_GADGET_DUALSPEED:
    - USB_GADGET_ATMEL_USBA
    - USB_GADGET_DWC2_OTG
    - USB_DWC3
    - CI_UDC
  - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED

While at it, make some related fixes:
  - remove DUALSPEED from configs that don't enable gadget support:
    - kwb.h
    - tseries.h
  - add missing USB_GADGET option to next configs:
    - novena_defconfig
    - pcm051_rev*_defconfig
    - xfi3_defconfig

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

The description was borrowed from kernel. Definitions were added to
defconfig files in a way that "make savedefconfig" generates exactly
the same file as used defconfig.

Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use
2 mA (as minimal allowed by Kconfig).

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

By applying this patch, it will give us some flexibility to expose
a selected partition/s.

e.g:
1. To expose several partitions
ums 0 mmc 0:1,0:6

2. To expose the all partitions
ums 0 mmc 0:0

3. To expose multiple partititions on several devices
ums 0 mmc 0:1,1:6

4. It support legacy format
ums 0 mmc 0

Signed-off-by: John Tobias <john.tobias.ph@gmail.com>

The USB Mass Storage (ums) works in Windows, Linux and OS X (EL Capitan).
But, not in OS X (Yosemite). By applying the said patch, it extends
the ums support.

Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>

Test HW: Odroid XU3 (./test/py UMS + DFU tests)

Tested-by: John Tobias <john.tobias.ph@gmail.com>

Linux:
    - Run ums to expose all my eMMC partition - shows all correctly
    - Run ums to expose only 1 partition of my eMMC - show correctly

Windows:
    - Run ums to expose all my eMMC partition - it detects but it prompts,
    if I want to format it (due to a non windows partition)
    - Run ums to expose only the FAT32 partition - it show the partition
      correctly.

This enables full ethernet usage, including U-Boot to write the board
specific MAC address (ethaddr) into the DT blob before passing it to
Linux.

Without this, the ethaddr is not detected in U-Boot at all, resulting
in this error upon bootup:

...
Model: EBV SOCrates
Net:
Error: ethernet@ff702000 address not set.
No ethernet found.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

Fix a small typo in some of the SoCFPGA dts files that has spread via
copy-and-paste.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

The code uses a lot of signed numbers, which ended up in variables
of unsigned type, which resulted in all sorts of underflows. This
in turn caused incorrect calibration on certain boards. Moreover,
repair the readout of the DQ delay, which was being pulled from
wrong register.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

Just staticize global variables in sequencer, since there is no
point in having these symbols available outside of the DDR code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

Originally, the DLEVEL selects the debug level within the sequencer code,
but only displays the messages on that particular debug level. Tweak the
handling such that for particular debug level, debug messages on that
level and lower are displayed. This allows better regulation of debug
message verbosity.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

This one last set of delay configuration registers was not properly
zeroed out originally, fix it and zero them out.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

There is no point in resetting the ODT setting if the write test
failed, since the code will always retry the calibration and thus
reconfigure the ODT anyway OR the code will fail calibration and
halt.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

Every invocation of the scc_mgr_set_dqs_en_delay_all_ranks() is
followed by SCC manager update. Moreover, only this function
triggers the SCC manager update internally. Thus, remove the
internal invocation to avoid triggering the update twice.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

The hi address bitfield in the protection rule must be set to
the last address in the region which the rule represents. The
behavior is now in-line with code generated by Quartus 15.1 .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

The code should be setting registers to zero, not one register to value.
Swap the order of arguments to correct the behavior. The behavior is now
in-line with code generated by Quartus 15.1 .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

In the most unlikely case the DQS tracking was to be disabled,
make sure we do not errornously re-enable it. Note that DQS
tracking is enabled on all systems observed thus far.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

The bit 22 is in fact DQS tracking enable bit (dqstrken) and there
is a macro for this bit already, so use it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>

MIPS arch do not update 'reg' property of /memory node.
As a result Linux bootup will not work unless board.dts
file contains right /memory offset-size information or
board implements required memory fixup.
Fixing by renaming (unused) _arch_fixup_memory_node_ to
_arch_fixup_fdt_ in arch/mips/lib/bootm.c inline with ARM arch.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

The current code in ARMv8's lowlevel_init() skips the per-CPU GIC
initialization ifndef CONFIG_ARMV8_MULTIENTRY. However, the per-CPU init
should always occur; it's just the one-time init that should only happen
on the master.

Once this consideration is taken into account, the only difference between
the paths when CONFIG_ARMV8_MULTIENTRY is undefined/defined is the use of
branch_if_slave. Naively, any unified code would need to invoke this
conditionally upon ifdef CONFIG_ARMV8_MULTIENTRY. However, branch_if_slave
already checks CONFIG_ARMV8_MULTIENTRY and does nothing if it isn't
defined, so we don't even need that ifdef at the call site.

Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>

As of commit 69e173eb, CONFIG_OF_LIBFDT
needs to be selected in defconfig instead of board specific header file.
Hence enable CONFIG_OF_LIBFDT in defconfig.

Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>

When there is no $fdtfile variable set, we still have a good chance
that on 32bit arm the fdtfile really is just called $soc-$board.dtb.

Enable the exports for $soc and $board in our distr defaults and make
use of them in the efi boot script.

Reported-by: Andreas Faerber <afaerber@suse.de>
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>

The bootefi cmd today fetches its device tree pointer from either the
location appointed by "fdt addr" with a fallback to the U-Boot control
fdt.

This integration is unusual for U-Boot and diverges from the way we
usually handle parameters to boot commands. So let's pass the fdt
directly into the bootefi command instead and move the control fdt
logic into the distro boot script.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>

Give a valid value here as well to allow things which want
CONFIG_ENV_VARS_UBOOT_CONFIG to build

Signed-off-by: Tom Rini <trini@konsulko.com>

Apparently, all "dave"-related vendor content was removed in commit
5344cc1a; remove remaining directory
board/dave/, which consists solely of board/dave/common/flash.c.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

Ensure data the following sata command used is flushed out of dcache
and written to physical memory or timeout error may happen.

Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>

dm_serial_ops.pending should return the number of characters, not just a
valid C Boolean integer value. The existing code does already does this,
but only as an accident since BCM283X_MU_LSR_RX_READY happens to be
BIT(0). Enhance the code to be more explicit about the values it returns.

Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>

Clean up the ext4 README file.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

Some variables for the distro boot commands were missing, using some
custom name instead. Rename them.

Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>