Commits · e8ae63e4335873b926922becfbc5e95558ae1c1b · Reform / reform-boundary-uboot

Feb 05, 2019

Troy Kisky authored 6 years ago


Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

e8ae63e4

fbpanel: compile for imx8mm · 124dccdc
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
124dccdc
boundary: common: add eth-imx8mm.c padctrl-imx8mm.h · 82317b23
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
82317b23
dt-bindings: pinctrl: pins-imx8mm.h: from imx_v2017.03_4.9.123_imx8mm_ga · f2223471
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
f2223471
dt-bindings: clock:imx8mm-clock.h: from imx_v2017.03_4.9.123_imx8mm_ga · 7eba10d6
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
7eba10d6
fsl-imx8mm.dtsi: from imx_v2017.03_4.9.123_imx8mm_ga · 1520b8f0
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
1520b8f0
mx8m: soc: add arch_misc_init · 3db1bebf
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
3db1bebf
imx8mm_pins: s/imx-common/mach-imx/ · 384a0821
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
384a0821
lpddr4_init: add checks for imx8mq · d51a26ed
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
d51a26ed
imx8m: add is_imx8mq/is_imx8mm · 8e6bf4e9
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
8e6bf4e9
clock_imx8mm: change parameter to dram_pll_init · bbe66cfa
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
bbe66cfa
arch-mx8m: add imx8m ddr files · 1b67cae8
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
1b67cae8
clock_imx8mm: use readl_poll_timeout · fcf3703c
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
fcf3703c
arm: clock_imx8mm: convert intpll_configure to use struct ana_grp2 · 5632f4a2
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
5632f4a2
arm: clock_imx8mm: convert fracpll_configure to use struct ana_grp · 66d47065
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
66d47065
arm: clock_imx8mm: convert decode_fracpll to use struct ana_grp · d0f4202b
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
d0f4202b
arm: clock_imx8mm: convert decode_intpll to use struct ana_grp2 · 16debc62
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
16debc62
arm: clock_imx8mm: rename local variables to drop pll prefix · 6e8239c1
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
6e8239c1
arm: clock_imx8mm s/enum pll_clocks pll/enum pll_clocks clock/ · d8d52b16
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
d8d52b16
arm: clock_imx8mm: add s/clock_init()/clock_init(void)/ · 3ab8fb39
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
3ab8fb39
arm: clock_imx8mm: s/do_mscale_showclocks/do_imx8mm_showclocks/ · 845e2baf
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
845e2baf
arm: clock_imx8mm: add ifdef CONFIG_SPL_BUILD around ddr code · 93a87c09
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
93a87c09
clock_imx8mm: s/ENET_25MHz/ENET_25MHZ/ · 5e8b0fb1
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
5e8b0fb1

MLK-18243-6 arm: imx8m: add clock driver for i.MX8MM · d53abb41

Peng Fan authored 6 years ago


The PLL used on i.MX8MM is different from i.MX8MQ,
so add new clock_imx8mm.c dedicated for i.MX8MM,

Currently use two new files for i.MX8MM, in future
the code could be restructed to share to avoid
code duplication.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

d53abb41

MLK-18243-5 arm: imx-common: iomux: add i.MX8MM PE property · caba24f1

Ye Li authored 6 years ago


i.MX8MM has a PE property, it does not have LVTTL

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

caba24f1

MLK-18243-4 arm: imx8m: add pin header for i.MX8MM · dee19794

Peng Fan authored 6 years ago


Add pin header file for i.MX8MM

To IMX8MM_PAD_NAND_WE_B_USDHC3_CLK, IOMUX_CONFIG_SION needs to be
selected.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

dee19794

MLK-18243-3 arm: imx8m: add clocks definition for i.MX8MM · ae2d722a

Peng Fan authored 6 years ago


Add clock definition for i.MX8MM
Move the original definition in clock.h to clock_imx8mq.h
Use CONFIG_IMX8MQ/M in clock.h to choose the correct header file.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

ae2d722a

MLK-18243-2 arm: imx8m: add regs definition for i.MX8MM · ca5976a2

Peng Fan authored 6 years ago


Move the original imx-regs.h to imx-regs-imx8mq.h
Introduce a new file dedicated for i.MX8MM
Use CONFIG_IMX8MQ/M to choose the header in imx-regs.h

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

ca5976a2

MLK-13602-1 mx6: Add i.MX6ULL fused modules checking support · 6a104008

Ye Li authored 8 years ago


Add the modules disable fuses mapping with FDT nodes and devices name.

Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Bai Ping <ping.bai@nxp.com>
(cherry picked from commit d033825f034467fa9c9aeff6fcf95a146c802cf1)

6a104008

MLK-12483-3 mx6: Add a module fuse checking · 0c303179

Ye Li authored 9 years ago


Implement a functionality to read the soc fuses and check if any module
is fused. For fused module, we have to disable it in u-boot dynamically,
and change the its node in FDT to "disabled" status before starting the kernel.

In this patch, we implement the ft_system_setup for FDT fixup. This function will
be called during boot process or by "fdt systemsetup" command.

To enable the module fuse checking, two configurations must be defined:
CONFIG_MODULE_FUSE
CONFIG_OF_SYSTEM_SETUP

Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 7236051526b73a5a25cc8330a79f5c08b7d70726)

0c303179

mx8m: soc: s/SYSCNT_CTRL_BASE_ADDR/SCTR_BASE_ADDR/ · 9ef63336
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
9ef63336
fsl_esdhc: s/priv->esdhc_regs/priv->c.esdhc_regs/ · 8f8bd76b
Troy Kisky authored 6 years ago
```
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
```
8f8bd76b

Feb 04, 2019
- ltch: add userspace controlled leds · 9eedcc9f
  Troy Kisky authored 6 years ago
  
  Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
  9eedcc9f
Jan 16, 2019
- ltch: add VD_PM9598 panel · ff516e76
  Troy Kisky authored 6 years ago
  
  Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
  ff516e76
- fbpanel: add VD_PM9598 for ltch · 70e4f55b
  Troy Kisky authored 6 years ago
  
  Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
  70e4f55b
Dec 31, 2018
- nitrogen8m: ddr_init: use MHZ(800) · 14552176
  Troy Kisky authored 6 years ago
  
  Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
  14552176
Dec 29, 2018
- clock_imx8mq: change parameter to dram_pll_init · 98110337
  Troy Kisky authored 6 years ago
  
  Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
  98110337
- arch-imx8m: rename clock.h to clock_imx8mq.h · 590601cb
  Troy Kisky authored 6 years ago
  
  Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
  590601cb
- mach-imx: imx8m: rename clock.c to clock_imx8mq.c · b3044b63
  Troy Kisky authored 6 years ago
  
  Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
  b3044b63
- arch: arm: mach-imx: mx8m: Kconfig: add MX8Q/MX8MM differentiation · 3d48226a
  Troy Kisky authored 6 years ago
  
  Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
  3d48226a