Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

So the version never overwrites the logo in case it starts at
the top of the display.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Since from mx7, we use fixed IVT offset for all boot devices.
Introduce a new configuration CONFIG_IMX_FIXED_IVT_OFFSET for this.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 88e0a3552b08627b18d98380a32dbafacb18854b)

Conflicts:
	tools/imximage.h

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

boundary_insert: make more resilient

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

make_boundary: exclude mx6qsabrelite configuration
make_boundary: verify DEFCONFIG macro is set properly
make_boundary: move defcfg test lower so that 'make all' result is not lost
make_boundary: improve boards determination

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

make_boundary: add parallel jobs capability

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>

To resolve USB camera bandwidth issue, the patch sets recommended AQoS
setting from IC team value for peripheral and only on imx6qp.

The address is: 0xbb0608, the value is: 0x80000201

Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit d00e9400bfbfb097ab5b0b26fae92db3dc1dd047)

Since i.MX6DQP has fixed the L2 cache issue, enable the double line
fill feature to provide better performance.

Signed-off-by: Ye.Li <B37916@freescale.com>

The use of the i.MX6 fuses is useful even on designs without
the FEC ethernet controller. Allow boards to request the
routine through CONFIG_FEC_MAC_FUSE.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>

mxc_i2c: add I2C_PADS_INFO_CPU for imx51
mxc_i2c: add mx53 support for I2C_PADS_INFO_ENTRY
mxc_i2c: add MX7D support to I2C_PADS_INFO_ENTRY

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

iomux-v3: add IOMUX_PAD_CTRL for CONFIG_MX7D
iomux-v3: add IOMUX_PAD_CTRL for imx51
iomux-v3: add support for i.mx53 with IOMUX_PAD_CTRL

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>