CHANGELOG:

* On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
   window registers, instead of using a hard-coded value of 8MB.

Signed-off-by: Timur Tabi <timur@freescale.com>

Unified TQM834x variable names with 83xx and consolidated macro
in preparation for the 8360 and other upcoming 83xx devices.

Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>

Incorporated the common unified variable names and the changes in preparation
for releasing mpc8360 patches.

Signed-off-by: Dave Liu <daveliu@freescale.com>

Make pci build for mpc8349emds

Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>

Removed unused file resetvec.S for mpc83xx cpu

Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>

This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
defined
and the write crosses a block boundary. The pointer to the verification
buffer (bufstart) is not being updated to reflect the starting of the
new
block so the verification of the second block fails.

CHANGELOG:

* Fix NAND FLASH page verification across block boundaries

Added a phy initialization to adjust the RGMII RX and TX timing
Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode

Signed-off-by: Nick Spence <nick.spence@freescale.com>

 - add watchdog support
 - enable GPIO_WKUP_7 pin for input
 - code cleanup

      * remove warnings when compiling ethaddr.c
      * adjust linker script (fixes a crash resulting from incorrect
      definition of __u_boot_cmd_start)
- Some MarelV38B code cleanup.

  MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
  Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
  MPC5XXX_WU_GPIO_DATA_O for affected boards.

- Add defintions for some MPC5XXX GPIO pins.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Stefan Roese <sr@denx.de>

Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
numbers in code.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Stefan Roese <sr@denx.de>

chpart, nboot and NAND subsystem related commands now accept also partition
name to specify offset.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Stefan Roese <sr@denx.de>

Make sure the string passed as variable name does not contain a '='
character. This not only prevents the common error or typing
"setenv foo=bar" instead of "setenv foo bar", but (more importantly)
also closes a backdoor which allowed to delete write-protected
environment variables, for example by using "setenv ethaddr=".

When passing the -g option to gcc, gcc automatically selects a
suitable --g<format> option to pass on to the assembler.
Thus, there's no point in forcing a specific debug option on the
assembler using the -Wa mechanism.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Signed-off-by: Jon Loeliger <jdl@freescale.com>

to a TSEC (e.g. a switch is connected via RMII) or
if the PHY is defective/incorrectly configured.

Signed-off-by: Ben Warren <bwarren@qstreams.com>

to a TSEC (e.g. a switch is connected via RMII) or
if the PHY is defective/incorrectly configured.

Signed-off-by: Ben Warren <bwarren@qstreams.com>

Add atstk1002_config target to Makefile and move the AVR32 section
down below Blackfin so that it doesn't end up in the middle of
MIPS.

Drop the autogenerated linker script thing for now. Will have to
revisit how to handle chips with different flash and RAM layout
later.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

If a Multi-Image file contains a third image we try to use it as a
device tree.  The device tree image is assumed to be uncompressed in the
image file.  We automatically allocate space for the device tree in memory
and provide an 8k pad to allow more than a reasonable amount of growth.

Additionally, a device tree that was contained in flash will now automatically
get copied to system memory as part of boot.  Previously an error was
reported if one tried to boot a device tree that was in flash.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Merge with /home/sr/git/u-boot/4xx-idcr

(use "make CHANGELOG" to update it from time to time)

Patch by Stefan Roese, 24 Oct 2006

(Conflicts between Jon Loeliger's and Matthew McClintock's tree
 were resolved by in favour of Jon's version.)