- Aug 07, 2018
-
-
Troy Kisky authored
Includes hsolo1g and hquad2g h.h: CONFIG_IPUV3_CLK 264000000 h: setup_dispay is done in fbpanel h: add CONFIG_CMD_GPIO h: explicit fbp_detect_i2c h: verify port in board_ehci_hcd_init h: use boundary.h h: setup rgb_gpio_pads in board_early_init_f h: add CONFIG_SPI_FLASH_SPANSION h: hquad2g_defconfig add CONFIG_BLOCK_CACHE hsolo1g: hsolo1g_defconfig add CONFIG_BLOCK_CACHE h: use common code for eth init h: eth.c now in common directory h: move misc_init_r/do_kbd to common h: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common h: use common 1066mhz_4x256mx16.cfg h: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs h: use common ddr scripts h: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> h: update to v2017.01 h: update to v2017.03 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
Troy Kisky authored
eo: add eo_duallite_defconfig eo.h: CONFIG_IPUV3_CLK 264000000 eo: use nitrogen6x/ddr-setup.cfg eo: use MX6Q or MX6DL instead of MX6QDL eo: add CONFIG_CMD_GPIO eo: explicit fbp_detect_i2c eo: add wlmac eo: use boundary.h eo: add CONFIG_SPI_FLASH_SPANSION eo: eo_defconfig add CONFIG_BLOCK_CACHE eo_duallite: eo_duallite_defconfig add CONFIG_BLOCK_CACHE eo: use common code for eth init eo: eth.c now in common directory eo: move misc_init_r/do_kbd to common eo: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common eo: use common 1066mhz_4x128mx16.cfg eo: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs eo: use common ddr scripts eo: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
dash.h: CONFIG_IPUV3_CLK 264000000 dash: add CONFIG_CMD_GPIO dash: explicit fbp_detect_i2c dash: verify port in board_ehci_hcd_init dash: use boundary.h dash: add CONFIG_SPI_FLASH_SPANSION dash: dash_defconfig add CONFIG_BLOCK_CACHE dash: use common code for eth init dash: eth.c now in common directory dash: move misc_init_r/do_kbd to common dash: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common dash: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs dash: add dash_q1g.cfg dash: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
cob2: 9 board sample for q1g ddr calibration cob2: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs cob2: use common ddr script cob2: port to v2018.07 Signed-off-by: -
Troy Kisky authored
cob.h: CONFIG_IPUV3_CLK 264000000 cob: use nitrogen6x/ddr-setup.cfg cob: add CONFIG_CMD_GPIO cob: explicit fbp_detect_i2c cob: verify port in board_ehci_hcd_init cob: use boundary.h cob: setup rgb_gpio_pads in board_early_init_f cob: add CONFIG_SPI_FLASH_SPANSION cob.h: skip fuses, they do it themselves cob: cob_defconfig add CONFIG_BLOCK_CACHE cob: use common code for eth init cob: eth.c now in common directory cob: move misc_init_r/do_kbd to common cob: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common cob: use common 1066mhz_4x128mx16.cfg cob: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs cob: use common ddr script cob: port to v2018.07 Signed-off-by:
-
Gary Bisson authored
cnt: add defconfig for 1GB of RAM version cnt: fix boot devs configuration cnt: update to v2017.01 cnt: update to v2017.03 cnt.h: add custom BOOT_TARGET_DEVICES priority Signed-off-by:
-
Troy Kisky authored
cid_tab: delay 3P7V rail turn on cid_tab: turn off boost before poweroff cid_tab: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs cid_tab: tamper support checking TAMPER pin cid_tab: use common ddr script cid_tab: port to v2018.07 Signed-off-by:
-
Gary Bisson authored
cid_2g_defconfig: reduce bootdelay to 0 cid: limit boot sequence to eMMC cid: start fastboot when power and reset are pressed Signed-off-by:
-
Troy Kisky authored
cad.h: CONFIG_IPUV3_CLK 264000000 cad: add CONFIG_CMD_GPIO cad: explicit fbp_detect_i2c cad: use VDF_SPI_QVGA cad: use boundary.h cad: setup rgb_gpio_pads in board_early_init_f cad: add CONFIG_SPI_FLASH_SPANSION cad: cad_defconfig add CONFIG_BLOCK_CACHE cad: use common code for eth init cad: eth.c now in common directory cad: move misc_init_r/do_kbd to common cad: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common cad: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs cad: use common ddr script cad: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
bt2: GPS is thru i2c now bt2: swap J6/J7 bt2: rename J6/J7 - J5V/J12v bt2: use nitrogen6x clock.cfg/ddr-setup.cfg bt2: 1066mhz_4x512mx16.cfg, remove confusing comment bt2: add/use 1066mhz_4x512mx16-r0.cfg for 4G memory option bt2: add CONFIG_CMD_GPIO bt2: explicit fbp_detect_i2c bt2: add wlmac bt2: increase refresh rate for 4G-rank0 bt2: setup rgb_gpio_pads in board_early_init_f bt2: add CONFIG_SPI_FLASH_SPANSION bt2: bt2_2g_defconfig add CONFIG_BLOCK_CACHE bt2_4g: bt2_4g_defconfig add CONFIG_BLOCK_CACHE bt2: use common code for eth init bt2: eth.c now in common directory bt2: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common bt2: use common 1066mhz_4x256mx16.cfg bt2: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs bt2: use common ddr scripts bt2: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
Two configurations bt2g and bt4g for two different memory layouts bt.h: CONFIG_IPUV3_CLK 264000000 bt: rename J6/J7 to J12V/J5V bt: use nitrogen6x clock.cfg/ddr-setup.cfg bt: add CONFIG_CMD_GPIO bt: explicit fbp_detect_i2c bt: use boundary.h bt: add CONFIG_SPI_FLASH_SPANSION bt.h: use BD_CMA to specify cma= on cmd_line bt: bt2g_defconfig add CONFIG_BLOCK_CACHE bt4g: bt4g_defconfig add CONFIG_BLOCK_CACHE bt: use common code for eth init bt: eth.c now in common directory bt: move misc_init_r/do_kbd to common bt: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common bt: use common 1066mhz_4x256mx16.cfg bt: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs bt: use common ddr scripts bt: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
ash2: KEY_COL0 must be UART4_TX_DATA ash2: add power_init_board because mdelay cannot be used in board_early_init_f ash2: use common 800mhz_4x128mx16.cfg, and calibrate ddr ash2: rgb24 vs rgb66 panel have different backlight active levels ash2: fixup dtb backlight levels ash2: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs ash2: use common ddr script ash2: port to v2018.07 Signed-off-by: -
Troy Kisky authored
ash: add poweroff command ash: fix some input gpios(CH_ON_RBL/SG_ON_RBL/DOOR_CLOSED ash: use nitrogen6x/clock.cfg ash: use nitrogen6x ddr-setup.cfg ash: remove micrel phy references(only atheros on this board) ash: add CONFIG_CMD_GPIO ash: set rgb_gpio_pads ash: TP86 becomes lvds backlight enable ash: explicit fbp_detect_i2c ash: default uart1 to rs232 ash: use 800mhz for memory ash: use boundary.h ash: GP_BSL_CB_ON_OFF high, TX23D200_18 default dispay ash: add CONFIG_VIDEO_SKIP_VERSION ash: GP_BSL_CB_ON_OFF default to low again ash: add EIM_EB2 for sd card power control ash: add CONFIG_SPI_FLASH_SPANSION ash: ash_defconfig add CONFIG_BLOCK_CACHE ash: use common code for eth init ash: eth.c now in common directory ash: move misc_init_r/do_kbd to common ash: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common ash: gpio3 is power off, don't redefine ash: add power_init_board because mdelay cannot be used in board_early_init_f ash: use common 800mhz_4x128mx16.cfg ash: rgb24 vs rgb66 panel have different backlight active levels ash: fixup dtb backlight levels ash: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs ash: use common ddr script ash: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
ap: forgot file include/configs/ap.h ap: ap_q2g_defconfig: add CONFIG_SPI_FLASH_GIGADEVICE ap: add bootscript_lp8860_eprom.txt ap: add verification to bootscript_lp8860_eprom.txt ap: use common ddr script ap: port to v2018.07 Signed-off-by: -
Gary Bisson authored
acl: update to v2017.01 acl update to v2017.03 acl: fix scanner gpios initialization Signed-off-by:
-
Gary Bisson authored
ys: update to v2017.01 ys: update to v2017.03 Signed-off-by:
-
Troy Kisky authored
a: add usb hub reset/uart3/uart4/flexcan pins a: keep USB Huawei Modem in reset a: add leds rx active/tx active a: remove printf of board_mmc_init a.h: add cmd_custom to avoid update u-boot warning a: add CONFIG_CMD_GPIO a: remove redundant CONFIG_CMD_GPIO a: verify port in board_ehci_hcd_init a: use boundary.h a: call preboot_keys a: add CONFIG_SPI_FLASH_SPANSION a: add RV4162 rtc on I2C2 a: a_defconfig add CONFIG_BLOCK_CACHE a: use common code for eth init a: eth.c now in common directory a: move misc_init_r/do_kbd to common a: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common a: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs a: add a_s512m.cfg a: port to v2018.07 Signed-off-by:
-
Troy Kisky authored
nitrogen6x: delay before enabling backlight spi_display: set mosi as write in enable_spi_rgb nitrogen6x: add IMX_VD_A030JN01_YUV720 nitrogen6x: add hdmi vga mode nitrogen6x: add hdmi 480p 6x_bootscript-ubuntu-3.14.txt: add imx7d support 6x_bootscript-yocto-3.14.txt: add imx7d support nitrogen6x: prefer hannstar7 over lg1280x800 nitrogen6x: initialize GP_USB_HUB_RESET as low output nitrogen6x: add IMX_VD38_AUO_B101EW05 nitrogen6x: add IMX_VD38_DT070BTFT nitrogen6x: support AR8035 phy as well Needed for new carrier with old SOM cpu card. nitrogen6x: add CONFIG_PHY_ATHEROS nitrogen6x: EIM_D29 high for new carrier with old som 6x_bootscript-ubuntu-3.14.txt: add rw if not using initrd nitrogen6x: add IMX_VD38_TM070JDHG30 nitrogen6x.h: CONFIG_IPUV3_CLK 264000000 nitrogen6x: add imx6qp support for ipu priorities nitrogen6x: ddr-setup.cfg: disable mirroring ddr-setup.cfg: add IMX6QP support nitrogen6x: spacing changes in environment variables nitrogen6x: explicit fbp_detect_i2c nitrogen6x: net_upgradeu.txt initial addition nitrogen6x: net_upgrade_fs.txt initial addition nitrogen6x: ubuntu/yocto add bd_addr for bluetooth mac to 6x_bootscript nitrogen6x: add wlmac nitrogen6x: add wlmac nitrogen6x: verify port in board_ehci_hcd_init nitrogen6x: use boundary.h nitrogen6x: setup rgb_gpio_pads in board_early_init_f nitrogen6x: add VD_KD024FM nitrogen6x: s/board_enable_spi_rgb/board_pre_enable/ nitrogen6x: add CONFIG_SPI_FLASH_SPANSION boundary.h: common include file initial commit boundary: separate bootcmd so it can be overridden 6x_bootscript-ubuntu-3.14.txt: add Laci's changes(cpu/board/bootpart) and nomsi 6x_bootscript-yocto-3.14.txt: add Laci's changes(cpu/board/bootpart) and nomsi net_upgrade_fs.txt: s/dhcp/tftp/ since ipaddr is already valid net_upgradeu.txt: s/dhcp/tftp/ since ipaddr is already valid 6x_bootscript-*-3.14.txt: s/enable_msi/disable_msi/ 6x_bootscript-*-3.14.txt: set bootargs after importing environment variable, as it may reset bootargs net_upgrade_fs.txt: grab decompressed size from end of file net_upgrade_fs: restructure to avoid using exit net_upgradeu: remove offset and friends from environment net_upgradeu_fs: initial addition boundary: allow override of CONFIG_SF_DEFAULT_CS, make fastboot conditional on CONFIG_CI_UDC boundary: add loglevel= environment variable boundary: add cma= option 6x_upgrade.txt: MX25L6405D has 64k erase size net_upgradeu.txt: MX25L6405D has 64k erase size 6x_upgrade.txt: add mx51 support 6x_bootscript*.txt: add i.mx51/i.mx53 support net_upgrade*.txt: add i.mx51/i.mx53 support 6x_bootscript-ubuntu-3.14.txt: add loglevel 6x_bootscript-yocto-3.14.txt: add loglevel 6x_bootscript-mainline.txt: add loglevel 6x_bootscript-mainline.txt: add reset_cause 6x_bootscript-ubuntu-3.14.txt: add reset_cause 6x_bootscript-yocto-3.14.txt: add reset_cause 6x_bootscript-ubuntu-3.14.txt: add run cmd_lcd2 6x_bootscript-yocto-3.14.txt: add run cmd_lcd2 6x_upgrade: add qspi support for Nitrogen7 6x_upgrade: add qspi file checks size/tag 6x_upgrade.txt: use sfname to burn correct qspi paramter file nitrogen6q_fl: add CONFIG_CMD_GPIO configs: boundary: add imx51 specifics ddr-setup.cfg: increase WALAT to 1 cycle include/configs/boundary.h: good default for BD_CONSOLE boundary: add fuse config needed for boards nitrogen6x: add script linking via next variable/prog_fuses boundary.h: allow skipping fuses nitrogen6x: nitrogen6q_defconfig add CONFIG_BLOCK_CACHE nitrogen6x: add CONFIG_BLOCK_CACHE to defconfigs boundary.h: add support for i.mx53 boundary: fix CONFIG_IPUV3_CLK for imx51/imx53 boundary.h: fix build warnings when HAB enabled nitrogen6dl2g_defconfig: remove extra define of CONFIG_SYS_EXTRA_OPTIONS boundary: fix CONFIG_ETHPRIME(FEC0) for imx6sx boundary: add eth.c/padctrl.h nitrogen6x: use common code for eth init nitrogen6x: add CONFIG_SYS_BOARD_MULTIPLE to defconfigs boundary: eth: use mask to compare ksz9021 boundary: move eth.c to common directory nitrogen6x: eth.c now in common directory nitrogen6x: move misc_init_r/do_kbd to common nitrogen6x: remove CONFIG_SYS_BOARD_MULTIPLE use undef CONFIG_SYS_BOARD instead nitrogen6x: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nitrogen6x: const i2c_pads_info nitrogen6x: use common 1066mhz_4x256mx16.cfg nitrogen6x: use common 1066mhz_4x128mx16.cfg nitrogen6x: use common 800mhz_4x128mx16.cfg nitrogen6x: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nitrogen6x: 800mhz_2x128mx16.cfg: remove _P1 accesses nitrogen6x: 800mhz_2x256mx16.cfg: remove _P1 accesses nitrogen6x: 800mhz_2x128mx16.cfg: use common values CFG0: 0x40435323 to 0x3f435333 tRFC - 65 to 64 clocks tFAW - 19 to 20 clocks CFG1: 0xB66E8D63 to 0xb68e8b63 tRC from 20 to 21 clocks tWR from 7 to 6 clocks MR0: 0x13208030 to 0x15208030 tWR from 5 to 6 clocks nitrogen6x: 800mhz_2x256mx16.cfg: use common values MDCFG0: from 0x696c5323 to 0x666a5333 tRFC - from 106 to 103 clocks tXS - from 109 to 107 clocks tFAW - from 19 to 20 clocks MDCFG1: from 0xb66e8d63 to 0xb68e8b63 tRC - from 20 to 21 clocks tWR - from 7 clocks to 6 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x13208030 to 0x15208030 tWR - from 5 to 6 clocks nitrogen6x: 800mhz_4x256mx16.cfg: use common values MDCFG0: from 0x696c5323 to 0x666a5333 tRFC - from 106 to 103 clocks tXS - from 109 to 107 clocks tFAW - from 19 to 20 clocks MDCFG1: from 0xb66e8d63 to 0xb68e8b63 tRC - from 20 to 21 clocks tWR - from 7 clocks to 6 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x13208030 to 0x15208030 tWR - from 5 to 6 clocks nitrogen6x: use common ddr scripts nitrogen6x: port to v2018.07 nitrogen6x: add VD_DT035BTFT panel Signed-off-by:
Laci Tele <laci@boundarydevices.com> 6x_bootscript-yocto-3.14.txt: Yocto boots from zImage 6x_bootscript-*-3.14.txt: Changed address range logic for SX when dtbname set 6x_bootscript-yocto-3.14: Add check for ${board} being undefined 6x_bootscript-ubuntu-3.14: Add check for ${board} being undefined 6x_bootscript-*-3.14.txt: Add dtb support for 6QP Signed-off-by:
Ian Coolidge <ian@boundarydevices.com> 6x_bootscript-mainline: switch to zImage booting nitrogen6x: add basic fastboot support 6x_bootscript-yocto-3.10.53: add Quad Plus dtb option nitrogen6x: declare TC358743 interrupt as input nitrogen6x.h: fixup update to v2017.01 boundary.h: increase fastboot buffer size boundary.h: add secure boot options boundary.h: fix USB host initialization 6x_bootscript-*-3.14.txt: add support for m4 specific dtb 6x_bootscript-mainline: update for new display configuration 6x_bootscript-mainline: switch to new panel naming 6x_bootscript-mainline: add support for BD070LIC2 6x_upgrade: re-introduce fs-specific load commands nitrogen6x: update to v2017.01 nitrogen6x: update to v2017.03 6x_bootscript-mainline: change default bootdir to be / boundary.h: add CONFIG_CMD_PART 6x_bootscript-mainline: fixup LVDS2 display handling 6x_bootscript-mainline: use UUID to identify root partition 6x_bootscript-mainline: introduce rfspart variable fixup boundary.h for 2017.07 boundary.h: use standard config_distro_bootcmd fixup 2 boundary.h for 2017.07 6x_bootscript-*-3.14.txt: add Silex mac address override support 6x_bootscript-yocto: remove obsolete commands 6x_bootscript-yocto: remove obsolete versions of script Signed-off-by:
-
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by: -
Troy Kisky authored
Signed-off-by:
-
- Jul 27, 2018
-
-
Troy Kisky authored
boundary: cmd_kbd bd_common initial addition boundary: add max77823_init common routine boundary: common: more addition boundary: move board_type out of BSS section boundary: pass const i2c_pads_info to common_board_init boundary: add .scr to our script names to run, ie. upgrade.scr boundary: common: padctrl-mx6: add INPUT_FLOAT boundary: common: max77823: add max77823_otg_power boundary: add CONFIG_VIDEO_MXS for imx6sx/imx7d boundary: common: max77823: add max77823_boost_power boundary: common: add MAX77823 for TARGET_CID_TAB boundary: common: add fan53526 0.6-1.4V regulator boundary: common add 1066mhz_4x256mx16.cfg This is replacing nitrogen6x/1066mhz_4x256mx16.cfg boundary: common: max77823: allow wcin source boundary: common: ddr-setup: use WALAT value provided boundary: common: add 1066mhz_4x128mx16.cfg boundary: common: add 800mhz_4x128mx16.cfg boundary: common: add CONFIG_DEFAULT_HITACHI_HVGA boundary: common: add tamper support boundary: common: add uboot_release environment variable boundary: common: padctrl-mx51: add PAD_CTRL_INPUT boundary: common: bd_common: fix warning by declaring snvs_regs boundary: boundary.h: check for CONFIG_ENV_OFFSET already defined boundary: boundary.h: allow override of BD_CONSOLE_STR boundary: common: 800mhz_4x128mx16.cfg: use common values This is in preparation to delete this file. CFG0: 0x40435323 to 0x3f435333 tRFC - 65 to 64 clocks tFAW - 19 to 20 clocks CFG1: 0xB66E8D63 to 0xb68e8b63 tRC from 20 to 21 clocks tWR from 7 to 6 clocks MR0: 0x13208030 to 0x15208030 tWR from 5 to 6 clocks boundary: common: add ddr configuration files boundary: common: remove no longer used files boundary: common: add CONFIG_OTG_CHARGER, used by cid board boundary: common: max77823: determine USB cable type Use cable type to limit chrgin current so that the kernel will not print "vbus is not valid" when battery is mostly charged. U-boot consumption is low enough to not need the current limited, but booting kernel needs it limited. boundary: common: add max77823_is_charging max77823: initialize MAX77823_CHG_CNFG_01 for restart threshold boundary: common: max77823: add max77834_power_check boundary: common: add cmd_otg_cable Signed-off-by:
-
- Jul 19, 2018
-
-
Troy Kisky authored
Signed-off-by:
-
- Jul 13, 2018
-
-
Troy Kisky authored
Signed-off-by:
-
- Jul 11, 2018
-
-
Laci Tele authored
Signed-off-by: -
Gary Bisson authored
Signed-off-by: -
Gary Bisson authored
Signed-off-by: -
Gary Bisson authored
Signed-off-by:
-
- Jul 10, 2018
-
-
Troy Kisky authored
nitrogen8m: add ddr/ddr_memory_map.h nitrogen8m: u-boot update changes nitrogen8m: turn off cameras nitrogen8m: cameras reset/pwrdn use ODE This limits the high level current to the pullup resistor. Signed-off-by:
-
Gary Bisson authored
Signed-off-by: -
Gary Bisson authored
The comparison between the new and old U-boot is still done using $filesize and therefore is correct. Signed-off-by: -
Gary Bisson authored
Signed-off-by: -
Gary Bisson authored
Signed-off-by: -
Gary Bisson authored
Based on 6x_bootscript*.txt but using the variables name from config_distro_bootcmd.h. Also using $prefix as $bootdir for Yocto and Mainline versions. boundary: bootscript: yocto: remove obsolete commands boundary: bootscripts: fix bad disk variable replacement boundary: bootscripts: net_upgradeu_fs: fix loaded script name boundary: bootscripts: net_upgradeu_fs: update to match distro_bootcmd boundary: bootscripts: add README file boundary: bootscripts: rename folder to be plural boundary: bootscripts: net_upgradeu_fs: remove active_partition Signed-off-by:
Stefan Becker <sbecker@neolitics.com>
-
- May 07, 2018
-
-
Tom Rini authored
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by:Tom Rini <trini@konsulko.com>
-
- Aug 16, 2017
-
-
Simon Glass authored
We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by:
Wolfgang Denk <wd@denx.de> Signed-off-by:
Simon Glass <sjg@chromium.org>
-
Simon Glass authored
We are now using an env_ prefix for environment functions. Rename these commonly used functions, for consistency. Also add function comments in common.h. Suggested-by:
-
