- Aug 07, 2018
-
-
Troy Kisky authored
nw.h: CONFIG_IPUV3_CLK 264000000 nw: add CONFIG_CMD_GPIO nw: explicit fbp_detect_i2c nw2: add CONFIG_CMD_GPIO nw: nw does not have I2C3 nw: remove CONFIG_SYS_I2C_MXC_I2C3 nw: verify port in board_ehci_hcd_init nw: use boundary.h nw: add CONFIG_SPI_FLASH_SPANSION nw: nw_defconfig add CONFIG_BLOCK_CACHE nw: use common code for eth init nw: eth.c now in common directory nw: move misc_init_r/do_kbd to common nw: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nw: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nw: 800mhz_2x256mx16.cfg: use common values MDCFG0: from 0x696c5323 to 0x666a5333 tRFC - from 106 to 103 clocks tXS - from 109 to 107 clocks tFAW - from 19 to 20 clocks MDCFG1: from 0xb66e8d63 to 0xb68e8b63 tRC - from 20 to 21 clocks tWR - from 7 clocks to 6 clocks MDRWD: from 0x000026d2 to 0x0f9f26d2 restore unused field to default value MDOR: from 0x006c1023 to 0x006a1023 tXPR - from 109 to 107 clocks MR0: from 0x13208030 to 0x15208030 tWR - from 5 to 6 clocks nw: use common ddr script nw: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> nw: update to v2017.01 nw: update to v2017.03 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
Troy Kisky authored
Includes nit6xlite and nit6xlite1g nit6xlite: add ASIT500MA6F5D nit6xlite: add CONFIG_IMX_HDMI nit6xlite: add HANNSTAR7/LG1280_800/SHARP_LQ101K1LY04 nit6xlite: add IMX_VD38_AUO_B101EW05 nit6xlite: add IMX_VD38_DT070BTFT nit6xlite.h: CONFIG_IPUV3_CLK 264000000 nit6xlite: setup_dispay is done in fbpanel nit6xlite.h: add basic fastboot support nit6xlite: add CONFIG_CMD_GPIO nit6xlite.c: explicit fbp_detect_i2c nit6xlite: add bd_addr bluetooth mac environment variable nit6xlite: verify fuse blown before setting wlmac nit6xlite: verify fuse blown before setting bd_addr nit6xlite: verify port in board_ehci_hcd_init nit6xlite: use boundary.h nit6xlite: add splash screen support nit6xlite: setup remaining pins nit6xlite: increase sd card drive strength nit6xlite: add secure boot option nit6xlite: add CONFIG_SPI_FLASH_SPANSION nit6xlite: nit6xlite_defconfig add CONFIG_BLOCK_CACHE nit6xlite1g: nit6xlite1g_defconfig add CONFIG_BLOCK_CACHE nit6xlite: use common code for eth init nit6xlite: eth.c now in common directory nit6xlite: move misc_init_r/do_kbd to common nit6xlite: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common nit6xlite: mute becomes CEC nit6xlite: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs nit6xlite: use common ddr scripts nit6xlite: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> nit6xlite: update to v2017.01 nit6xlite: update to v2017.03 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
Troy Kisky authored
bt2: GPS is thru i2c now bt2: swap J6/J7 bt2: rename J6/J7 - J5V/J12v bt2: use nitrogen6x clock.cfg/ddr-setup.cfg bt2: 1066mhz_4x512mx16.cfg, remove confusing comment bt2: add/use 1066mhz_4x512mx16-r0.cfg for 4G memory option bt2: add CONFIG_CMD_GPIO bt2: explicit fbp_detect_i2c bt2: add wlmac bt2: increase refresh rate for 4G-rank0 bt2: setup rgb_gpio_pads in board_early_init_f bt2: add CONFIG_SPI_FLASH_SPANSION bt2: bt2_2g_defconfig add CONFIG_BLOCK_CACHE bt2_4g: bt2_4g_defconfig add CONFIG_BLOCK_CACHE bt2: use common code for eth init bt2: eth.c now in common directory bt2: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common bt2: use common 1066mhz_4x256mx16.cfg bt2: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs bt2: use common ddr scripts bt2: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> bt2: update to v2017.01 bt2: update to v2017.03 bt2: move misc_init_r/do_kbd to common Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
Troy Kisky authored
ap: forgot file include/configs/ap.h ap: ap_q2g_defconfig: add CONFIG_SPI_FLASH_GIGADEVICE ap: add bootscript_lp8860_eprom.txt ap: add verification to bootscript_lp8860_eprom.txt ap: use common ddr script ap: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com>
-
Gary Bisson authored
ys: update to v2017.01 ys: update to v2017.03 Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com> ys: ys_1g_defconfig add CONFIG_BLOCK_CACHE ys_512m: ys_512m_defconfig add CONFIG_BLOCK_CACHE ys: use common code for eth init ys: eth.c now in common directory ys: move misc_init_r/do_kbd to common ys: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common ys: don't define CONFIG_CMD_FBPANEL, no display ys: keep GP_RESET_DSP_N high ys: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs ys: add CONFIG_SPI_FLASH_WINBOND ys: fix eMMC voltage vccq to allows 1.8V ys: add comment for ddr ys: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com>
-
Troy Kisky authored
a: add usb hub reset/uart3/uart4/flexcan pins a: keep USB Huawei Modem in reset a: add leds rx active/tx active a: remove printf of board_mmc_init a.h: add cmd_custom to avoid update u-boot warning a: add CONFIG_CMD_GPIO a: remove redundant CONFIG_CMD_GPIO a: verify port in board_ehci_hcd_init a: use boundary.h a: call preboot_keys a: add CONFIG_SPI_FLASH_SPANSION a: add RV4162 rtc on I2C2 a: a_defconfig add CONFIG_BLOCK_CACHE a: use common code for eth init a: eth.c now in common directory a: move misc_init_r/do_kbd to common a: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common a: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs a: add a_s512m.cfg a: port to v2018.07 Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> a: update to v2017.01 a: update to v2017.03 a.h: add custom BOOT_TARGET_DEVICES priority Signed-off-by:
Gary Bisson <gary.bisson@boundarydevices.com>
-
- Nov 09, 2017
-
-
Lukasz Majewski authored
This commit provides support for LWN's IMX6Q based DISPLAY5 board. Signed-off-by:
Lukasz Majewski <lukma@denx.de>
-