Add a simple driver which implements the standard PWM uclass interface.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add a uclass that supports Pulse Width Modulation (PWM) devices. It
provides methods to enable/disable and configure the device.

Signed-off-by: Simon Glass <sjg@chromium.org>

Some video bridges will not have GPIOs to control reset, etc. Allow these
to be optional.

Signed-off-by: Simon Glass <sjg@chromium.org>

Allow the cache-flushing function of a video device to be controlled.

Signed-off-by: Simon Glass <sjg@chromium.org>

We must use the console name in the 'stdout' variable to select the one
we want. At present the name is formed from the driver name with a suffix
indicating the rotation value.

It seems better to name them sequentially since this can be controlled by
driver order. So adjust the code to use 'vidconsole' for the first,
'vidconsole1' for the second, etc.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present there is no indication that an invalid GPIO is used except that
the GPIO status is not displayed. Make the error more explicit to avoid
confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>

When driver model is used for video but not for the keyboard, a compiler
warnings is produced. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Turn on the EC and enable the keyboard.

Signed-off-by: Simon Glass <sjg@chromium.org>

The correct pinctrl is handled automatically so we don't need to do it in
the driver. The exception is when we want to use a different chip select
(other than 0). But this isn't used at present.

Signed-off-by: Simon Glass <sjg@chromium.org>

At present there is an incorrect call to rkspi_enable_chip(). It should
be disabling the chip, not enabling it. Correct this and ensure that the
chip is disabled when releasing the bus.

Signed-off-by: Simon Glass <sjg@chromium.org>

Some devices need delays before and after activiation. Implement these
features in the SPI driver so that we will be able to enable the Chrome
OS EC.

Signed-off-by: Simon Glass <sjg@chromium.org>

Provide this method so that 'gpio status' works fully. It now shows
whether a pin is used for input, output or some other function.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function should return 0 or 1, not a mask. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Implement this so that the GPIO command will be able to report whether a
GPIO is used for input or output.

Signed-off-by: Simon Glass <sjg@chromium.org>

This file has many features that are not needed by SPL. Use #ifdef to
remove the unused features and reduce the code size.

Signed-off-by: Simon Glass <sjg@chromium.org>

The current method assumes that clocks are numbered from 0 and we can
determine a clock by its number. It is safer to use an ID in the clock's
platform data to avoid the situation where another clock is bound before
the one we expect.

Move the existing code into rk3036 since it still works there. Add a new
implementation for rk3288.

Signed-off-by: Simon Glass <sjg@chromium.org>

Two of the init values are created locally so cannot be out of range.
The masking is unnecessary and in one case is incorrect. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>

Rather than changing the clock to the same value on every transaction,
remember the last value and don't adjust the clock unless it is necessary.

Signed-off-by: Simon Glass <sjg@chromium.org>

Use this function in preference to the macro.

Signed-off-by: Simon Glass <sjg@chromium.org>

Use this function in preference to the macro.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function adds quite a bit of code to SPL and we probably don't need
all the features in SPL. Add a simple version (for SPL only) to save space.

Signed-off-by: Simon Glass <sjg@chromium.org>

Some regulators will not implement any operations (e.g. fixed regulators).
This is not an error, so allow the autoset process to continue when one
of these regulators is found.

Signed-off-by: Simon Glass <sjg@chromium.org>

The currect PMIC debugging is a little confusing. Adjust it so that it is
clear whether the operation succeeded or failed. Also, avoid creating a new
error return value when a perfectly good one is already available.

Signed-off-by: Simon Glass <sjg@chromium.org>

It is sometimes useful to be able to find a device before probing it,
perhaps to set up some platform data for it. Allow finding by of_offset
also.

Signed-off-by: Simon Glass <sjg@chromium.org>

GPIO drivers want to be able to show if a pin is enabled for input, output,
or is being used by another function. Some drivers can easily find this
and the code is included in the driver. For some SoCs this is more complex.
Conceptually this should be handled by pinctrl rather than GPIO. Most
pinctrl drivers will have this feature anyway.

Add a method by which a GPIO driver can obtain the pin mux value given a
GPIO reference. This avoids repeating the code in two places.

Signed-off-by: Simon Glass <sjg@chromium.org>

For some boards the pmic interface is useful but the regulator interface
(which comes with it) is too large. Allow them to be separated such that
SPL can decide which it needs.

Signed-off-by: Simon Glass <sjg@chromium.org>

This function currently searches the entire device tree for a node that
it thinks is relevant. But the node is known and is passed in. Correct the
code and enable it only with driver model, since only driver-model boards
will use it.

This avoids bringing in a large number of strings from fdtdec.

Signed-off-by: Simon Glass <sjg@chromium.org>

Since I2C muxes are seldom needed in SPL, and the code for this increases
the size somewhat, add a separate option to enable I2C muxes for SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>

This is not used in SPL so don't allow it to be built there, even if I2C
is enabled in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>

The 'gpio' command allows abbreviations for most subcommands. Allow them
for 'status' also.

Signed-off-by: Simon Glass <sjg@chromium.org>

To reduce the SPL image size, drop the LED features. Jerry does not have
an LED and we can leave out GPIO support also.

Signed-off-by: Simon Glass <sjg@chromium.org>

This is not needed for booting, so drop it from SPL to save about 300 bytes.

Signed-off-by: Simon Glass <sjg@chromium.org>

Enable this PMIC and regulator, which is used on jerry.

Signed-off-by: Simon Glass <sjg@chromium.org>

Use the full pinctrl driver in U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>

We can make use of the device tree to configure pinctrl settings. Add this
support for the driver so we can use it in U-Boot proper.

Signed-off-by: Simon Glass <sjg@chromium.org>

We can use the new clk_get_by_index() function to get the correct clock.

Signed-off-by: Simon Glass <sjg@chromium.org>

If full pinctrl is enabled we don't need to manually set the pinctrl in the
driver. It will happen automatically. Adjust the code to suit - we will
still use manual mode in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>

We can use the new clk_get_by_index() function to get the correct clock.

Signed-off-by: Simon Glass <sjg@chromium.org>

We can use the new clk_get_by_index() function to get the correct clock.

Signed-off-by: Simon Glass <sjg@chromium.org>

The current approach of using uclass_get_device() is error-prone. Another
clock (for example a fixed-clock) may cause it to break. Add a function that
does a proper search.

Signed-off-by: Simon Glass <sjg@chromium.org>