- add support for Analog Devices Blackfin BF533 CPU
- add support for the ADI BF533 Stamp uClinux board
- add support for the ADI BF533 EZKit board
Patches by Richard Klingler, June 11th 2005:

variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005

- Use correct flash sector size
- Use correct memory test end address
- Add support for bzip2 compression
- Various small fixes
Patch by Yuli Barcohen, 05 Jun 2005

- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005

add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005

Patch by Jean-Paul Saman, 01 Mar 2005

Controller.

 * For READ_STATUS and READID commands always 8 bytes need to be read from
   NDDB. Otherwise they stay there and get send to flash as the first data
   word when writing.

 * In nand_base.c the oob variable is not reset so this->oob_buf is
   overwritten what eventually screws up the bad block descriptor table.

code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.

 * Debug message can be turned on and off.
 * Waiting for events now times out.
 * Implemented RESET command.
 * Added appropriate nand_bbt_descriptor and nand_oobinfo.

Remaining Problems:
 * Read Status still behaves weird an returns invalid stuff sometimes.
 * ECC Placement does not respect our scheme in nand_oobinfo.

Patch by Stefan Roese, 1 Mar 2006

use hush shell.

Patch by Stefan Roese, 28 Feb 2006

* Add env-variable "unlock" to handle initial state of sectors
  (locked/unlocked).

  Only the U-Boot image and it's environment is protected,
  all other sectors are unprotected (unlocked) if flash
  hardware protection is used (CFG_FLASH_PROTECTION) and
  the environment variable "unlock" is set to "yes".

  Patch by Stefan Roese, 28 Feb 2006

* Update drivers/cfi_flash.c:
  - find_sector() called in both versions of flash_write_cfiword()
  Patch by Peter Pearse, 27th Feb 2006

* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
  Patch by Jose Maria Lopez, 16 Jan 2006

* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
  Patch by Alex Bastos and Thomas Schaefer, 2005-08-29

* Changes/fixes for drivers/cfi_flash.c:
  We *should* check if there are any error bits if the previous call
  returned ERR_OK (Otherwise we will have output an error message in
  flash_status_check() already.)  The original code would only check for
  error bits if flash_status_check() returns ERR_TIMEOUT.
  Patch by Marcus Hall, 23 Aug 2005

* Changes/fixes for drivers/cfi_flash.c:
  - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
  - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
  Patch by Sangmoon Kim, 19 Aug 2005

* Fixes for drivers/cfi_flash.c:
  - Fix wrong timeout value usage in flash_status_check()
  - Round write_tout up when converting to msec in flash_get_size()
  - Remove clearing flash status at the end of flash_write_cfibuffer()
    which sets Intel 28F640J3 flash back to command mode on CSB472
  Patch by Tolunay Orkun, 02 July 2005

we only see 64MB.

Minimally modified patch by Bluetechnix, Vienna

As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
of all unreleased (untagged) U-Boot images will be automatically
extended upon compiletime with a part of the GIT commit ID and
possibly with "dirty" if uncommited changes are detected.

Here an example for the resulting version:
"U-Boot 1.1.4-g3457ac18-dirty"

The version is now maintained in the toplevel Makefile and the
version headers are autogenerated.

Patch by Stefan Roese, 9 Feb 2006

Signed-off-by: Heiko Schocher <hs@denx.de>

zylonite). Minor pxa-regs.h update.

Register Definitions.

It doesn't run yet.

breaks backward compatibility and I don't trust it. Instead, i'll verify
and merge the parts I need while porting.

other platforms (see c75eba3b)

	* lots of bugfixes in the assembler code
	* reverted hardware.h back to original
	* enabled hardware DRAM calibration
	* GCC-4 fix: modified GLOBAL_DATA_POINTER macro

Patch by Reinhard Arlt, 8 Feb 2006