ARM: uniphier: merge two defconfig files

PH1-Pro5 support and ProXstream2/PH1-LD6b support can coexist in one
image and there is bit more room in SPL to accommodate all of them.
Merge uniphier_pro5_defconfig into uniphier_pxs2_defconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

configs/uniphier_pro5_defconfig

-CONFIG_ARM=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ARCH_UNIPHIER_PH1_PRO5=y
-CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_SYS_TEXT_BASE=0x84000000
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro5-4kbox"
-CONFIG_HUSH_PARSER=y
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_TIME=y
-# CONFIG_CMD_MISC is not set
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_SIMPLE_BUS=y
-CONFIG_GPIO_UNIPHIER=y
-CONFIG_MMC_UNIPHIER=y
-CONFIG_NAND_DENALI=y
-CONFIG_SYS_NAND_DENALI_64BIT=y
-CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_SPL_NAND_DENALI=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_UNIPHIER_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_STORAGE=y

configs/uniphier_pxs2_ld6b_defconfig

 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ARCH_UNIPHIER_PH1_PRO5=y
 CONFIG_ARCH_UNIPHIER_PROXSTREAM2=y
 CONFIG_ARCH_UNIPHIER_PH1_LD6B=y
 CONFIG_MICRO_SUPPORT_CARD=y

doc/README.uniphier

@@ -45,8 +45,8 @@ PH1-Pro4 reference board:
     $ make CROSS_COMPILE=arm-linux-gnueabi-
 
 PH1-Pro5 4KBOX Board:
-    $ make uniphier_pro5_defconfig
-    $ make CROSS_COMPILE=arm-linux-gnueabi-
+    $ make uniphier_pxs2_ld6b_defconfig
+    $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-pro5-4kbox
 
 ProXstream2 Gentil board:
     $ make uniphier_pxs2_ld6b_defconfig