driver/i2c/mxc: Enable I2C bus 3 and 4

Some SoCs have more than two I2C busses. Instead of adding ifdef
to the driver, macros are put into board header file where
CONFIG_SYS_I2C_MXC is defined.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: Heiko Schocher <hs@denx.de>

README

@@ -2395,6 +2395,8 @@ CBFS (Coreboot Filesystem) support
 		  - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE
 		If those defines are not set, default value is 100000
 		for speed, and 0 for slave.
+		  - enable bus 3 with CONFIG_SYS_I2C_MXC_I2C3
+		  - enable bus 4 with CONFIG_SYS_I2C_MXC_I2C4
 
 		- drivers/i2c/rcar_i2c.c:
 		  - activate this driver with CONFIG_SYS_I2C_RCAR

drivers/i2c/mxc_i2c.c

@@ -114,6 +114,9 @@ static u16 i2c_clk_div[50][2] = {
 #ifndef CONFIG_SYS_MXC_I2C3_SPEED
 #define CONFIG_SYS_MXC_I2C3_SPEED 100000
 #endif
+#ifndef CONFIG_SYS_MXC_I2C4_SPEED
+#define CONFIG_SYS_MXC_I2C4_SPEED 100000
+#endif
 
 #ifndef CONFIG_SYS_MXC_I2C1_SLAVE
 #define CONFIG_SYS_MXC_I2C1_SLAVE 0
@@ -124,6 +127,9 @@ static u16 i2c_clk_div[50][2] = {
 #ifndef CONFIG_SYS_MXC_I2C3_SLAVE
 #define CONFIG_SYS_MXC_I2C3_SLAVE 0
 #endif
+#ifndef CONFIG_SYS_MXC_I2C4_SLAVE
+#define CONFIG_SYS_MXC_I2C4_SLAVE 0
+#endif
 
 
 /*
@@ -543,12 +549,17 @@ U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
 			 mxc_i2c_set_bus_speed,
 			 CONFIG_SYS_MXC_I2C2_SPEED,
 			 CONFIG_SYS_MXC_I2C2_SLAVE, 1)
-#if defined(CONFIG_MX31) || defined(CONFIG_MX35) ||\
-	defined(CONFIG_MX51) || defined(CONFIG_MX53) ||\
-	defined(CONFIG_MX6) || defined(CONFIG_LS102XA)
+#ifdef CONFIG_SYS_I2C_MXC_I2C3
 U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
 			 mxc_i2c_read, mxc_i2c_write,
 			 mxc_i2c_set_bus_speed,
 			 CONFIG_SYS_MXC_I2C3_SPEED,
 			 CONFIG_SYS_MXC_I2C3_SLAVE, 2)
 #endif
+#ifdef CONFIG_SYS_I2C_MXC_I2C4
+U_BOOT_I2C_ADAP_COMPLETE(mxc3, mxc_i2c_init, mxc_i2c_probe,
+			 mxc_i2c_read, mxc_i2c_write,
+			 mxc_i2c_set_bus_speed,
+			 CONFIG_SYS_MXC_I2C4_SPEED,
+			 CONFIG_SYS_MXC_I2C4_SLAVE, 3)
+#endif

include/configs/aristainetos.h

@@ -262,6 +262,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0x7f
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x00} }

include/configs/cm_fx6.h

@@ -245,6 +245,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_MXC_I2C3_SPEED	400000
 

include/configs/embestmx6boards.h

@@ -55,6 +55,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* USB Configs */

include/configs/flea3.h

@@ -52,6 +52,7 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
 #define CONFIG_SYS_MXC_I2C3_SLAVE	0xfe
 #define CONFIG_MXC_SPI

include/configs/gw_ventana.h

@@ -95,6 +95,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_I2C_GSC			0
 #define CONFIG_I2C_PMIC			1

include/configs/imx31_phycore.h

@@ -38,6 +38,7 @@
 
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_CLK_OFFSET	I2C2_CLK_OFFSET
 
 #define CONFIG_MXC_UART

include/configs/ls1021aqds.h

@@ -389,6 +389,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
 /*
  * I2C bus multiplexer

include/configs/ls1021atwr.h

@@ -205,6 +205,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
 /* EEPROM */
 #ifndef CONFIG_SD_BOOT

include/configs/ls2085a_common.h

@@ -84,6 +84,8 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4		/* enable I2C bus 4 */
 #define CONFIG_SYS_MXC_I2C1_SPEED	40000000
 #define CONFIG_SYS_MXC_I2C2_SPEED	40000000
 

include/configs/m53evk.h

@@ -176,6 +176,7 @@
 #ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_RTC_BUS_NUM		1 /* I2C2 */
 #endif
 

include/configs/mx35pdk.h

@@ -42,6 +42,7 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 

include/configs/mx53ard.h

@@ -48,6 +48,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC

include/configs/mx53evk.h

@@ -41,6 +41,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
 /* PMIC Configs */
 #define CONFIG_POWER

include/configs/mx53loco.h

@@ -76,6 +76,7 @@
 /* I2C Configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
 /* PMIC Controller */
 #define CONFIG_POWER

include/configs/mx53smd.h

@@ -38,6 +38,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC

include/configs/mx6qsabreauto.h

@@ -56,6 +56,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* NAND flash command */

include/configs/mx6sabresd.h

@@ -52,6 +52,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		  100000
 
 /* PMIC */

include/configs/mx6slevk.h

@@ -52,6 +52,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		  100000
 
 /* PMIC */