board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO

Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arch/arm/dts/at91-sama5d2_xplained.dts

@@ -41,6 +41,31 @@
 		};
 
 		apb {
+			hlcdc: hlcdc@f0000000 {
+				atmel,vl-bpix = <4>;
+				atmel,guard-time = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				display-timings {
+					u-boot,dm-pre-reloc;
+					480x272 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hsync-len = <41>;
+						hfront-porch = <2>;
+						hback-porch = <2>;
+						vfront-porch = <2>;
+						vback-porch = <2>;
+						vsync-len = <11>;
+						u-boot,dm-pre-reloc;
+					};
+				};
+			};
+
 			qspi0: spi@f0020000 {
 				status = "okay";
 
@@ -117,6 +142,41 @@
 						bias-disable;
 					};
 
+					pinctrl_lcd_base: pinctrl_lcd_base {
+						pinmux = <PIN_PC30__LCDVSYNC>,
+							<PIN_PC31__LCDHSYNC>,
+							<PIN_PD1__LCDDEN>,
+							<PIN_PD0__LCDPCK>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_pwm: pinctrl_lcd_pwm {
+						pinmux = <PIN_PC28__LCDPWM>;
+						bias-disable;
+					};
+
+					pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 {
+						pinmux = <PIN_PC10__LCDDAT2>,
+							<PIN_PC11__LCDDAT3>,
+							<PIN_PC12__LCDDAT4>,
+							<PIN_PC13__LCDDAT5>,
+							<PIN_PC14__LCDDAT6>,
+							<PIN_PC15__LCDDAT7>,
+							<PIN_PC16__LCDDAT10>,
+							<PIN_PC17__LCDDAT11>,
+							<PIN_PC18__LCDDAT12>,
+							<PIN_PC19__LCDDAT13>,
+							<PIN_PC20__LCDDAT14>,
+							<PIN_PC21__LCDDAT15>,
+							<PIN_PC22__LCDDAT18>,
+							<PIN_PC23__LCDDAT19>,
+							<PIN_PC24__LCDDAT20>,
+							<PIN_PC25__LCDDAT21>,
+							<PIN_PC26__LCDDAT22>,
+							<PIN_PC27__LCDDAT23>;
+						bias-disable;
+					};
+
 					pinctrl_macb0_phy_irq: macb0_phy_irq {
 						pinmux = <PIN_PC9__GPIO>;
 						bias-disable;

arch/arm/dts/sama5d2.dtsi

@@ -69,6 +69,13 @@
 			#size-cells = <1>;
 			u-boot,dm-pre-reloc;
 
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf0000000 0x2000>;
+				clocks = <&lcdc_clk>;
+				status = "disabled";
+			};
+
 			pmc: pmc@f0014000 {
 				compatible = "atmel,sama5d2-pmc", "syscon";
 				reg = <0xf0014000 0x160>;

arch/arm/mach-at91/Kconfig

@@ -153,6 +153,7 @@ config TARGET_SAMA5D2_XPLAINED
 	select SAMA5D2
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
 
 config TARGET_SAMA5D27_SOM1_EK
 	bool "SAMA5D27 SOM1 EK board"

board/atmel/sama5d2_xplained/sama5d2_xplained.c

@@ -6,10 +6,7 @@
  */
 
 #include <common.h>
-#include <atmel_hlcdc.h>
 #include <debug_uart.h>
-#include <lcd.h>
-#include <version.h>
 #include <asm/io.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/atmel_pio4.h>
@@ -26,90 +23,15 @@ static void board_usb_hw_init(void)
 	atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1);
 }
 
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-	.vl_col = 480,
-	.vl_row = 272,
-	.vl_clk = 9000000,
-	.vl_bpix = LCD_BPP,
-	.vl_tft = 1,
-	.vl_hsync_len = 41,
-	.vl_left_margin = 2,
-	.vl_right_margin = 2,
-	.vl_vsync_len = 11,
-	.vl_upper_margin = 2,
-	.vl_lower_margin = 2,
-	.mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void)	{ /* Empty! */ }
-void lcd_disable(void)	{ /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
 {
-	return 1;
-}
-
-static void board_lcd_hw_init(void)
-{
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0);	/* LCDPWM */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* LCDDISP */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0);	/* LCDVSYNC */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0);	/* LCDHSYNC */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTD,  0, 0);	/* LCDPCK */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTD,  1, 0);	/* LCDDEN */
-
-	/* LCDDAT0 */
-	/* LCDDAT1 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDDAT2 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDDAT3 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0);	/* LCDDAT4 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0);	/* LCDDAT5 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDDAT6 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDDAT7 */
-
-	/* LCDDAT8 */
-	/* LCDDAT9 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDDAT10 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0);	/* LCDDAT11 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDDAT12 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDDAT13 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0);	/* LCDDAT14 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0);	/* LCDDAT15 */
-
-	/* LCDD16 */
-	/* LCDD17 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDDAT18 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDDAT19 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDDAT20 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0);	/* LCDDAT21 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDDAT22 */
-	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDDAT23 */
-
-	at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
-	ulong dram_size;
-	int i;
-	char temp[32];
-
-	lcd_printf("%s\n", U_BOOT_VERSION);
-	lcd_printf("2015 ATMEL Corp\n");
-	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
-		   strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-
-	lcd_printf("%ld MB SDRAM\n", dram_size >> 20);
+#ifdef CONFIG_DM_VIDEO
+	at91_video_show_board_info();
+#endif
+	return 0;
 }
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
+#endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 static void board_uart1_hw_init(void)
@@ -142,9 +64,6 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-#ifdef CONFIG_LCD
-	board_lcd_hw_init();
-#endif
 #ifdef CONFIG_CMD_USB
 	board_usb_hw_init();
 #endif

configs/sama5d2_xplained_mmc_defconfig

@@ -82,3 +82,5 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

configs/sama5d2_xplained_spiflash_defconfig

@@ -79,3 +79,5 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y

include/configs/sama5d2_xplained.h

@@ -35,18 +35,6 @@
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #endif
 
-/* LCD */
-
-#ifdef CONFIG_LCD
-#define LCD_BPP				LCD_COLOR16
-#define LCD_OUTPUT_BPP                  24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#endif
-
 #ifdef CONFIG_SD_BOOT
 
 /* bootstrap + u-boot + env in sd card */