sunxi: Move SUNXI_GMAC to Kconfig

Move the SUNXI_GMAC config option to Kconfig, remove it
from SYS_EXTRA_OPTIONS and rename it into SUN7I_GMAC.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

configs/A20-OLinuXino-Lime2_defconfig

@@ -8,7 +8,7 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SYS_EXTRA_OPTIONS="RGMII,SATAPWR=SUNXI_GPC(3)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -25,6 +25,7 @@ CONFIG_NET_ETHADDR_EEPROM=y
 CONFIG_NET_ETHADDR_EEPROM_I2C=y
 CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
 CONFIG_I2C1_ENABLE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y

configs/A20-OLinuXino-Lime_defconfig

@@ -6,7 +6,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPC(3)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -20,6 +20,7 @@ CONFIG_NET_ETHADDR_EEPROM=y
 CONFIG_NET_ETHADDR_EEPROM_I2C=y
 CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
 CONFIG_I2C1_ENABLE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y

configs/A20-OLinuXino_MICRO_defconfig

@@ -9,7 +9,7 @@ CONFIG_VIDEO_VGA=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPB(8)"
+CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPB(8)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -23,6 +23,7 @@ CONFIG_NET_ETHADDR_EEPROM=y
 CONFIG_NET_ETHADDR_EEPROM_I2C=y
 CONFIG_NET_ETHADDR_EEPROM_I2C_BUS=1
 CONFIG_I2C1_ENABLE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y

configs/A20-Olimex-SOM-EVB_defconfig

@@ -11,7 +11,7 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPC(3)"
+CONFIG_SYS_EXTRA_OPTIONS="RGMII,SATAPWR=SUNXI_GPC(3)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -21,6 +21,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y

configs/Bananapi_defconfig

@@ -7,7 +7,7 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23)"
+CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPH(23)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -18,4 +18,5 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/Bananapro_defconfig

@@ -9,7 +9,7 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23)"
+CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPH(23)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -20,5 +20,6 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO4_VOLT=2500
 CONFIG_USB_EHCI_HCD=y

configs/CSQ_CS908_defconfig

@@ -6,7 +6,6 @@ CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
@@ -15,6 +14,7 @@ CONFIG_SPL=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y

configs/Colombus_defconfig

@@ -16,7 +16,7 @@ CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
 CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
+CONFIG_SYS_EXTRA_OPTIONS="RGMII"
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
@@ -25,5 +25,6 @@ CONFIG_SPL=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y

configs/Cubieboard2_defconfig

@@ -6,7 +6,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPB(8)"
+CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPB(8)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -16,4 +16,5 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/Cubietruck_defconfig

@@ -11,7 +11,7 @@ CONFIG_GMAC_TX_DELAY=1
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPH(12)"
+CONFIG_SYS_EXTRA_OPTIONS="RGMII,SATAPWR=SUNXI_GPH(12)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -24,6 +24,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DFU_RAM=y
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y

configs/Hummingbird_A31_defconfig

@@ -8,7 +8,7 @@ CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
+CONFIG_SYS_EXTRA_OPTIONS="RGMII"
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
@@ -17,5 +17,6 @@ CONFIG_SPL=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y

configs/Itead_Ibox_A20_defconfig

@@ -6,7 +6,7 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPB(8)"
+CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPB(8)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -16,4 +16,5 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/Lamobo_R1_defconfig

@@ -7,7 +7,7 @@ CONFIG_GMAC_TX_DELAY=4
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),SATAPWR=SUNXI_GPB(3)"
+CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPH(23),SATAPWR=SUNXI_GPB(3)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -17,4 +17,5 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/Linksprite_pcDuino3_Nano_defconfig

@@ -8,7 +8,7 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,SATAPWR=SUNXI_GPH(2)"
+CONFIG_SYS_EXTRA_OPTIONS="RGMII,SATAPWR=SUNXI_GPH(2)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -18,4 +18,5 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/Linksprite_pcDuino3_defconfig

@@ -6,7 +6,7 @@ CONFIG_DRAM_ZQ=122
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,SATAPWR=SUNXI_GPH(2)"
+CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPH(2)"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -16,4 +16,5 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/Mele_A1000G_quad_defconfig

@@ -7,7 +7,6 @@ CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
@@ -16,6 +15,7 @@ CONFIG_SPL=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_DCDC1_VOLT=3300
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_AXP_DLDO1_VOLT=3300

configs/Mele_I7_defconfig

@@ -6,7 +6,6 @@ CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
@@ -15,6 +14,7 @@ CONFIG_SPL=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_DCDC1_VOLT=3300
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_AXP_DLDO1_VOLT=3300

configs/Mele_M3_defconfig

@@ -8,7 +8,6 @@ CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -18,4 +17,5 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/Mele_M5_defconfig

@@ -8,7 +8,6 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 CONFIG_SPL=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
@@ -18,4 +17,5 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y

configs/Mele_M9_defconfig

@@ -6,7 +6,6 @@ CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
@@ -15,6 +14,7 @@ CONFIG_SPL=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ETH_DESIGNWARE=y
+CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_DCDC1_VOLT=3300
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_AXP_DLDO1_VOLT=3300