avr32: Rename pm_init() as clk_init() and make SoC-specific

pm_init() was always more about clock initialization than anything
else. Dealing with PLLs, clock gating and such is also inherently
SoC-specific, so move it into a SoC-specific directory.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

cpu/at32ap/at32ap700x/Makefile

@@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)lib$(SOC).a
 
-COBJS	:= gpio.o
+COBJS	:= gpio.o clk.o
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 

cpu/at32ap/at32ap700x/clk.c

+/*
+ * Copyright (C) 2005-2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#include "sm.h"
+
+void clk_init(void)
+{
+	uint32_t cksel;
+
+	/* in case of soft resets, disable watchdog */
+	sm_writel(WDT_CTRL, SM_BF(KEY, 0x55));
+	sm_writel(WDT_CTRL, SM_BF(KEY, 0xaa));
+
+#ifdef CONFIG_PLL
+	/* Initialize the PLL */
+	sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
+			    | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
+			    | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
+			    | SM_BF(PLLOPT, CFG_PLL0_OPT)
+			    | SM_BF(PLLOSC, 0)
+			    | SM_BIT(PLLEN)));
+
+	/* Wait for lock */
+	while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
+#endif
+
+	/* Set up clocks for the CPU and all peripheral buses */
+	cksel = 0;
+	if (CFG_CLKDIV_CPU)
+		cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
+	if (CFG_CLKDIV_HSB)
+		cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
+	if (CFG_CLKDIV_PBA)
+		cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
+	if (CFG_CLKDIV_PBB)
+		cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
+	sm_writel(PM_CKSEL, cksel);
+
+#ifdef CONFIG_PLL
+	/* Use PLL0 as main clock */
+	sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
+#endif
+}

cpu/at32ap/cpu.c

@@ -30,7 +30,6 @@
 #include <asm/arch/memory-map.h>
 
 #include "hsmc3.h"
-#include "sm.h"
 
 /* Sanity checks */
 #if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB)		\
@@ -44,51 +43,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static void pm_init(void)
-{
-	uint32_t cksel;
-
-#ifdef CONFIG_PLL
-	/* Initialize the PLL */
-	sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
-			    | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
-			    | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
-			    | SM_BF(PLLOPT, CFG_PLL0_OPT)
-			    | SM_BF(PLLOSC, 0)
-			    | SM_BIT(PLLEN)));
-
-	/* Wait for lock */
-	while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
-#endif
-
-	/* Set up clocks for the CPU and all peripheral buses */
-	cksel = 0;
-	if (CFG_CLKDIV_CPU)
-		cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
-	if (CFG_CLKDIV_HSB)
-		cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
-	if (CFG_CLKDIV_PBA)
-		cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
-	if (CFG_CLKDIV_PBB)
-		cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
-	sm_writel(PM_CKSEL, cksel);
-
-	gd->cpu_hz = get_cpu_clk_rate();
-
-#ifdef CONFIG_PLL
-	/* Use PLL0 as main clock */
-	sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
-#endif
-}
-
 int cpu_init(void)
 {
 	extern void _evba(void);
 
-	/* in case of soft resets, disable watchdog */
-	sm_writel(WDT_CTRL, SM_BF(KEY, 0x55));
-	sm_writel(WDT_CTRL, SM_BF(KEY, 0xaa));
-
 	gd->cpu_hz = CFG_OSC0_HZ;
 
 	/* TODO: Move somewhere else, but needs to be run before we
@@ -98,8 +56,12 @@ int cpu_init(void)
 	hsmc3_writel(PULSE0, 0x0b0a0906);
 	hsmc3_writel(SETUP0, 0x00010002);
 
-	pm_init();
+	clk_init();
+
+	/* Update the CPU speed according to the PLL configuration */
+	gd->cpu_hz = get_cpu_clk_rate();
 
+	/* Set up the exception handler table and enable exceptions */
 	sysreg_write(EVBA, (unsigned long)&_evba);
 	asm volatile("csrf	%0" : : "i"(SYSREG_EM_OFFSET));
 

include/asm-avr32/arch-at32ap700x/clk.h

@@ -75,6 +75,8 @@ static inline unsigned long get_mci_clk_rate(void)
 }
 #endif
 
+extern void clk_init(void);
+
 /* Board code may need the SDRAM base clock as a compile-time constant */
 #define SDRAMC_BUS_HZ	(MAIN_CLK_RATE >> CFG_CLKDIV_HSB)