Skip to content
Snippets Groups Projects
atmel_pio4.c 7.57 KiB
Newer Older
  • Learn to ignore specific revisions
  • /*
     * Atmel PIO4 device driver
     *
     * Copyright (C) 2015 Atmel Corporation
     *		 Wenyou.Yang <wenyou.yang@atmel.com>
     *
     * SPDX-License-Identifier:	GPL-2.0+
     */
    #include <common.h>
    
    #include <clk.h>
    
    #include <dm.h>
    
    #include <fdtdec.h>
    #include <dm/root.h>
    
    #include <asm/arch/hardware.h>
    
    #include <asm/gpio.h>
    
    #include <mach/gpio.h>
    #include <mach/atmel_pio4.h>
    
    
    DECLARE_GLOBAL_DATA_PTR;
    
    
    static struct atmel_pio4_port *atmel_pio4_port_base(u32 port)
    {
    	struct atmel_pio4_port *base = NULL;
    
    	switch (port) {
    	case AT91_PIO_PORTA:
    		base = (struct atmel_pio4_port *)ATMEL_BASE_PIOA;
    		break;
    	case AT91_PIO_PORTB:
    		base = (struct atmel_pio4_port *)ATMEL_BASE_PIOB;
    		break;
    	case AT91_PIO_PORTC:
    		base = (struct atmel_pio4_port *)ATMEL_BASE_PIOC;
    		break;
    	case AT91_PIO_PORTD:
    		base = (struct atmel_pio4_port *)ATMEL_BASE_PIOD;
    		break;
    	default:
    		printf("Error: Atmel PIO4: Failed to get PIO base of port#%d!\n",
    		       port);
    		break;
    	}
    
    	return base;
    }
    
    static int atmel_pio4_config_io_func(u32 port, u32 pin,
    				     u32 func, u32 use_pullup)
    {
    	struct atmel_pio4_port *port_base;
    	u32 reg, mask;
    
    
    	if (pin >= ATMEL_PIO_NPINS_PER_BANK)
    
    		return -ENODEV;
    
    	port_base = atmel_pio4_port_base(port);
    	if (!port_base)
    		return -ENODEV;
    
    	mask = 1 << pin;
    	reg = func;
    
    	reg |= use_pullup ? ATMEL_PIO_PUEN_MASK : 0;
    
    
    	writel(mask, &port_base->mskr);
    	writel(reg, &port_base->cfgr);
    
    	return 0;
    }
    
    int atmel_pio4_set_gpio(u32 port, u32 pin, u32 use_pullup)
    {
    	return atmel_pio4_config_io_func(port, pin,
    
    					 ATMEL_PIO_CFGR_FUNC_GPIO,
    
    					 use_pullup);
    }
    
    int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 use_pullup)
    {
    	return atmel_pio4_config_io_func(port, pin,
    
    					 ATMEL_PIO_CFGR_FUNC_PERIPH_A,
    
    					 use_pullup);
    }
    
    int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 use_pullup)
    {
    	return atmel_pio4_config_io_func(port, pin,
    
    					 ATMEL_PIO_CFGR_FUNC_PERIPH_B,
    
    					 use_pullup);
    }
    
    int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 use_pullup)
    {
    	return atmel_pio4_config_io_func(port, pin,
    
    					 ATMEL_PIO_CFGR_FUNC_PERIPH_C,
    
    					 use_pullup);
    }
    
    int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 use_pullup)
    {
    	return atmel_pio4_config_io_func(port, pin,
    
    					 ATMEL_PIO_CFGR_FUNC_PERIPH_D,
    
    					 use_pullup);
    }
    
    int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 use_pullup)
    {
    	return atmel_pio4_config_io_func(port, pin,
    
    					 ATMEL_PIO_CFGR_FUNC_PERIPH_E,
    
    					 use_pullup);
    }
    
    int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 use_pullup)
    {
    	return atmel_pio4_config_io_func(port, pin,
    
    					 ATMEL_PIO_CFGR_FUNC_PERIPH_F,
    
    					 use_pullup);
    }
    
    int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 use_pullup)
    {
    	return atmel_pio4_config_io_func(port, pin,
    
    					 ATMEL_PIO_CFGR_FUNC_PERIPH_G,
    
    					 use_pullup);
    }
    
    int atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value)
    {
    	struct atmel_pio4_port *port_base;
    	u32 reg, mask;
    
    
    	if (pin >= ATMEL_PIO_NPINS_PER_BANK)
    
    		return -ENODEV;
    
    	port_base = atmel_pio4_port_base(port);
    	if (!port_base)
    		return -ENODEV;
    
    	mask = 0x01 << pin;
    
    	reg = ATMEL_PIO_CFGR_FUNC_GPIO | ATMEL_PIO_DIR_MASK;
    
    
    	writel(mask, &port_base->mskr);
    	writel(reg, &port_base->cfgr);
    
    	if (value)
    		writel(mask, &port_base->sodr);
    	else
    		writel(mask, &port_base->codr);
    
    	return 0;
    }
    
    int atmel_pio4_get_pio_input(u32 port, u32 pin)
    {
    	struct atmel_pio4_port *port_base;
    	u32 reg, mask;
    
    
    	if (pin >= ATMEL_PIO_NPINS_PER_BANK)
    
    		return -ENODEV;
    
    	port_base = atmel_pio4_port_base(port);
    	if (!port_base)
    		return -ENODEV;
    
    	mask = 0x01 << pin;
    
    	reg = ATMEL_PIO_CFGR_FUNC_GPIO;
    
    
    	writel(mask, &port_base->mskr);
    	writel(reg, &port_base->cfgr);
    
    	return (readl(&port_base->pdsr) & mask) ? 1 : 0;
    }
    
    #ifdef CONFIG_DM_GPIO
    
    
    struct atmel_pioctrl_data {
    	u32 nbanks;
    };
    
    struct atmel_pio4_platdata {
    	struct atmel_pio4_port *reg_base;
    };
    
    static struct atmel_pio4_port *atmel_pio4_bank_base(struct udevice *dev,
    						    u32 bank)
    {
    	struct atmel_pio4_platdata *plat = dev_get_platdata(dev);
    	struct atmel_pio4_port *port_base =
    			(struct atmel_pio4_port *)((u32)plat->reg_base +
    			ATMEL_PIO_BANK_OFFSET * bank);
    
    	return port_base;
    }
    
    
    static int atmel_pio4_direction_input(struct udevice *dev, unsigned offset)
    {
    
    	u32 bank = ATMEL_PIO_BANK(offset);
    	u32 line = ATMEL_PIO_LINE(offset);
    	struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
    	u32 mask = BIT(line);
    
    
    	writel(mask, &port_base->mskr);
    
    
    	clrbits_le32(&port_base->cfgr,
    		     ATMEL_PIO_CFGR_FUNC_MASK | ATMEL_PIO_DIR_MASK);
    
    
    	return 0;
    }
    
    static int atmel_pio4_direction_output(struct udevice *dev,
    				       unsigned offset, int value)
    {
    
    	u32 bank = ATMEL_PIO_BANK(offset);
    	u32 line = ATMEL_PIO_LINE(offset);
    	struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
    	u32 mask = BIT(line);
    
    
    	writel(mask, &port_base->mskr);
    
    
    	clrsetbits_le32(&port_base->cfgr,
    			ATMEL_PIO_CFGR_FUNC_MASK, ATMEL_PIO_DIR_MASK);
    
    
    	if (value)
    		writel(mask, &port_base->sodr);
    	else
    		writel(mask, &port_base->codr);
    
    	return 0;
    }
    
    static int atmel_pio4_get_value(struct udevice *dev, unsigned offset)
    {
    
    	u32 bank = ATMEL_PIO_BANK(offset);
    	u32 line = ATMEL_PIO_LINE(offset);
    	struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
    	u32 mask = BIT(line);
    
    
    	return (readl(&port_base->pdsr) & mask) ? 1 : 0;
    }
    
    static int atmel_pio4_set_value(struct udevice *dev,
    				unsigned offset, int value)
    {
    
    	u32 bank = ATMEL_PIO_BANK(offset);
    	u32 line = ATMEL_PIO_LINE(offset);
    	struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
    	u32 mask = BIT(line);
    
    
    	if (value)
    		writel(mask, &port_base->sodr);
    	else
    		writel(mask, &port_base->codr);
    
    	return 0;
    }
    
    static int atmel_pio4_get_function(struct udevice *dev, unsigned offset)
    {
    
    	u32 bank = ATMEL_PIO_BANK(offset);
    	u32 line = ATMEL_PIO_LINE(offset);
    	struct atmel_pio4_port *port_base = atmel_pio4_bank_base(dev, bank);
    	u32 mask = BIT(line);
    
    
    	writel(mask, &port_base->mskr);
    
    	return (readl(&port_base->cfgr) &
    
    		ATMEL_PIO_DIR_MASK) ? GPIOF_OUTPUT : GPIOF_INPUT;
    
    }
    
    static const struct dm_gpio_ops atmel_pio4_ops = {
    	.direction_input	= atmel_pio4_direction_input,
    	.direction_output	= atmel_pio4_direction_output,
    	.get_value		= atmel_pio4_get_value,
    	.set_value		= atmel_pio4_set_value,
    	.get_function		= atmel_pio4_get_function,
    };
    
    
    static int atmel_pio4_bind(struct udevice *dev)
    {
    	return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
    }
    
    
    static int atmel_pio4_probe(struct udevice *dev)
    {
    
    	struct atmel_pio4_platdata *plat = dev_get_platdata(dev);
    
    	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
    
    	struct atmel_pioctrl_data *pioctrl_data;
    	struct clk clk;
    	fdt_addr_t addr_base;
    	u32 nbanks;
    	int ret;
    
    	ret = clk_get_by_index(dev, 0, &clk);
    	if (ret)
    		return ret;
    
    	ret = clk_enable(&clk);
    	if (ret)
    		return ret;
    
    	clk_free(&clk);
    
    	addr_base = dev_get_addr(dev);
    	if (addr_base == FDT_ADDR_T_NONE)
    		return -EINVAL;
    
    	plat->reg_base = (struct atmel_pio4_port *)addr_base;
    
    	pioctrl_data = (struct atmel_pioctrl_data *)dev_get_driver_data(dev);
    	nbanks = pioctrl_data->nbanks;
    
    	uc_priv->bank_name = fdt_get_name(gd->fdt_blob, dev->of_offset, NULL);
    	uc_priv->gpio_count = nbanks * ATMEL_PIO_NPINS_PER_BANK;
    
    /*
     * The number of banks can be different from a SoC to another one.
     * We can have up to 16 banks.
     */
    static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = {
    	.nbanks	= 4,
    };
    
    static const struct udevice_id atmel_pio4_ids[] = {
    	{
    		.compatible = "atmel,sama5d2-gpio",
    		.data = (ulong)&atmel_sama5d2_pioctrl_data,
    	},
    	{}
    };
    
    
    U_BOOT_DRIVER(gpio_atmel_pio4) = {
    	.name	= "gpio_atmel_pio4",
    	.id	= UCLASS_GPIO,
    	.ops	= &atmel_pio4_ops,
    	.probe	= atmel_pio4_probe,
    
    	.bind	= atmel_pio4_bind,
    	.of_match = atmel_pio4_ids,
    	.platdata_auto_alloc_size = sizeof(struct atmel_pio4_platdata),