Skip to content
Snippets Groups Projects
spl.c 3.31 KiB
Newer Older
  • Learn to ignore specific revisions
  • /*
     * Copyright (c) 2016 Google, Inc
     *
     * SPDX-License-Identifier:     GPL-2.0
     */
    
    #include <common.h>
    #include <debug_uart.h>
    
    #include <init_helpers.h>
    
    #include <spl.h>
    #include <asm/cpu.h>
    #include <asm/mtrr.h>
    #include <asm/processor.h>
    #include <asm-generic/sections.h>
    
    DECLARE_GLOBAL_DATA_PTR;
    
    
    __weak int arch_cpu_init_dm(void)
    {
    	return 0;
    }
    
    
    static int x86_spl_init(void)
    {
    	/*
    	 * TODO(sjg@chromium.org): We use this area of RAM for the stack
    	 * and global_data in SPL. Once U-Boot starts up and releocates it
    	 * is not needed. We could make this a CONFIG option or perhaps
    	 * place it immediately below CONFIG_SYS_TEXT_BASE.
    	 */
    	char *ptr = (char *)0x110000;
    	int ret;
    
    	debug("%s starting\n", __func__);
    	ret = spl_init();
    	if (ret) {
    		debug("%s: spl_init() failed\n", __func__);
    		return ret;
    	}
    	ret = arch_cpu_init();
    	if (ret) {
    		debug("%s: arch_cpu_init() failed\n", __func__);
    		return ret;
    	}
    	ret = arch_cpu_init_dm();
    	if (ret) {
    		debug("%s: arch_cpu_init_dm() failed\n", __func__);
    		return ret;
    	}
    
    	preloader_console_init();
    
    	ret = print_cpuinfo();
    	if (ret) {
    		debug("%s: print_cpuinfo() failed\n", __func__);
    		return ret;
    	}
    	ret = dram_init();
    	if (ret) {
    		debug("%s: dram_init() failed\n", __func__);
    		return ret;
    	}
    	memset(&__bss_start, 0, (ulong)&__bss_end - (ulong)&__bss_start);
    
    	/* TODO(sjg@chromium.org): Consider calling cpu_init_r() here */
    	ret = interrupt_init();
    	if (ret) {
    		debug("%s: interrupt_init() failed\n", __func__);
    		return ret;
    	}
    
    	/*
    	 * The stack grows down from ptr. Put the global data at ptr. This
    	 * will only be used for SPL. Once SPL loads U-Boot proper it will
    	 * set up its own stack.
    	 */
    	gd->new_gd = (struct global_data *)ptr;
    	memcpy(gd->new_gd, gd, sizeof(*gd));
    	arch_setup_gd(gd->new_gd);
    	gd->start_addr_sp = (ulong)ptr;
    
    	/* Cache the SPI flash. Otherwise copying the code to RAM takes ages */
    	ret = mtrr_add_request(MTRR_TYPE_WRBACK,
    			       (1ULL << 32) - CONFIG_XIP_ROM_SIZE,
    			       CONFIG_XIP_ROM_SIZE);
    	if (ret) {
    		debug("%s: SPI cache setup failed\n", __func__);
    		return ret;
    	}
    
    	return 0;
    }
    
    void board_init_f(ulong flags)
    {
    	int ret;
    
    	ret = x86_spl_init();
    	if (ret) {
    		debug("Error %d\n", ret);
    		hang();
    	}
    
    	/* Uninit CAR and jump to board_init_f_r() */
    	board_init_f_r_trampoline(gd->start_addr_sp);
    }
    
    void board_init_f_r(void)
    {
    	init_cache_f_r();
    	gd->flags &= ~GD_FLG_SERIAL_READY;
    	debug("cache status %d\n", dcache_status());
    	board_init_r(gd, 0);
    }
    
    u32 spl_boot_device(void)
    {
    	return BOOT_DEVICE_BOARD;
    }
    
    int spl_start_uboot(void)
    {
    	return 0;
    }
    
    void spl_board_announce_boot_device(void)
    {
    	printf("SPI flash");
    }
    
    static int spl_board_load_image(struct spl_image_info *spl_image,
    				struct spl_boot_device *bootdev)
    {
    	spl_image->size = CONFIG_SYS_MONITOR_LEN;
    	spl_image->entry_point = CONFIG_SYS_TEXT_BASE;
    	spl_image->load_addr = CONFIG_SYS_TEXT_BASE;
    	spl_image->os = IH_OS_U_BOOT;
    	spl_image->name = "U-Boot";
    
    	debug("Loading to %lx\n", spl_image->load_addr);
    
    	return 0;
    }
    SPL_LOAD_IMAGE_METHOD("SPI", 0, BOOT_DEVICE_BOARD, spl_board_load_image);
    
    int spl_spi_load_image(void)
    {
    	return -EPERM;
    }
    
    void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
    {
    	int ret;
    
    	printf("Jumping to 64-bit U-Boot: Note many features are missing\n");
    	ret = cpu_jump_to_64bit_uboot(spl_image->entry_point);
    	debug("ret=%d\n", ret);
    	while (1)
    		;
    }