Skip to content
Snippets Groups Projects
Select Git revision
  • early-display
  • master default protected
  • variant-emmc-nvme-boot
  • 2023-01-25
  • v3
  • variant-emmc-nvme-boot
  • 2020-06-01
7 results
You can move around the graph by using the arrow keys.
Created with Raphaël 2.2.026Feb20865416Jan30Dec28272618125414Nov12976530Oct2518131282120Sep1730Aug271698727Jul191211109865321230Jun292827252324232223222119boundary: bootscripts: add i.MX6ULL supportsquash fsl_qspi: add support for SST_AAI_WPmxc_i2c.h: add not_octal function so 08 worksnitrogen8mm: add panel detectionfbpanel: add FBF_M101NWWB_NO_CMDSfbpanel: fix imx8mm supportnitrogen8m_som: s/GP_I2C4_SN65DSI83_EN/GP_I2C1D_SN65DSI83_EN/nitrogen8mm: make sw3 180 degrees from sw4make_boundary: u-boot-lpddr4-${SOC}-${sz}.${ext} for arm64nitrogen8mm: initial additionnitrogen8m_som: initial additionnitrogen8m: Kconfig: s/freescale/boundary/nitrogen8m: spl: setup pad IMX8MQ_PAD_GPIO1_IO08__GPIO1_IO8ehci-mx6: delay ehci_usb_phy_mode call until after registers are accessibleusb-uclass: add usb_is_host to check if in otg device modemach-imx: imx8m: soc: imx8m_usb_power is needed for imx8mm toogpio-regulator: add .get_enable/.set_enablefsl_esdhc: remove timeout message that I addedfsl_esdhc: fix support for CONFIG_BLK not definedMLK-16499-1 mmc: Add support for HS400MLK-16496-2 mmc: fsl_esdhc: add hs400 es mode supportMLK-16365 mmc: add sd/mmc legacy capabilitymmc: Add a new callback function to check if the card is busymmc: Add a new callback function to enable/disable vddfsl_esdhc: add 10 sec timeout checkfsl_esdhc: fix clock if ddr is usedfsl_esdhc: check wp from dtb if given, from 8mmfsl_esdhc: finish adding regulators vmmc/vqmmcfsl_esdhc: add MMC_HS_400 from 8mm branchfsl_esdhc: add esdhc_dump for debugging, from 8mm branchfsl_esdhc: add IMX8 supportarm: mach-imx: imx8m: clock_imx8mm: add init_clk_usdhcMLK-18243-13 drivers: pinctrl: support i.MX8MMimx8mm_pins.h: add SION to I2C padsMLK-18654-2 imx: Change USB boot device typeMLK-18333-2 imx8m: add QSPI boot devMLK-18243-17: arm: imx-common: fix sd to mmc1 and emmc to mmc2 for i.MX8MMMLK-16758-4 SPL: Add HAB image authentication to FITMLK-16047 imx8mq_evk: Enable eMMC boot supportMLK-18654-3 spl: Un-define the DM USB for SPL