The following commit:

commit 882b7d72
Author: Mike Frysinger <vapier@gentoo.org>
Date:   Wed Oct 20 03:41:17 2010 -0400

    do_reset: unify duplicate prototypes

missed the 74xx_7xx and mpc86xx arches and the ppmc7xx board do_reset()
functions which resulted in build errors such as:
  cpu.c:128: error: conflicting types for 'do_reset'
  include/command.h:102: error: previous declaration of 'do_reset' was here

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

By rearranging the linker script we get support for
relocation of -fpic for free.
Move __got2_entries outside _GOT2_TABLE_ defining scope
matching the rest of PowerPC

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>

By rearranging the linker script we get support for
relocation of -fpic for free.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>

PT7C4338 chip is being manufactured by Pericom Technology Inc.
It is a serial real-time clock which provides:
1)Low-power clock/calendar.
2)Programmable square-wave output.
It has 56 bytes of nonvolatile RAM.

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>

New default partitions on nor flash:

640k   (firmware)
1408k  (kernel)
2m     (initrd)
4m     (small-fs)
24320k (big-fs)
256k   (dts)

Signed-off-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

While we're here, cut out the useless id defines too.

Signed-off-by: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Chong Huang <chuang@ucrobotics.com>
Signed-off-by: Haitao Zhang <minipanda@linuxrobot.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This patch adds the possibility to (optinally) write to the
flash configuration register. The Intel style CFI chips support
such a register that can be used to configure the operation
mode to a non-default value.

This method will be used by the t3corp board, which needs to
configure the DS617 Xilinx flash for async read mode.

Signed-off-by: Stefan Roese <sr@denx.de>

The function sector_erased() is modified to not use pointer
access, but to use the correct accessor functions. This fixes a
problem on the t3corp board with the Xilinx DS617 flash chips. Here
a board specific accessor function is needed to read from flash
in 32bit mode. This patch enables such an operation mode.

Signed-off-by: Stefan Roese <sr@denx.de>

This patch adds some calls to set the flash chip in the read-status-
register- or read-id-mode before the corresponding register is
read back. This problem was detected while porting the common CFI
driver to support the Xilinx DS617 flash chips.

Signed-off-by: Stefan Roese <sr@denx.de>

Use common ppc4xx linker script for xilinx ppc440 and ppc405 related boards.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

This patch changes the PPC4xx ethernet POST loop test count from
currently 192 (256 - 64) to a default of 10. While doing this the max
frame size is increased. Each loop run uses a different frame size,
starting with a max of 1514 bytes, down to 64. The default loop
count of 10 can be overriden using CONFIG_SYS_POST_ETH_LOOPS in the
board config header.

The TEST_NUM loop has been removed as it was never used.

The main reason for this change is to reduce the boot time on boards
using this POST test, like the lwmon5 board. This change reduces the
boot time by about 600ms on the lwmon5 board.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>

This patch includes the following changes for the lwmon5 board support:

- Enable cache in SDRAM
- Use common EHCI driver instead of the PPC4xx specific OHCI driver
  This can be done since only high-speed devices are connected.
- Remove cached TLB entry again after ECC setup
- Use correct define for cache enabling
  (CONFIG_4xx_DCACHE instead of CONFIG_SYS_ENABLE_SDRAM_CACHE)
- Enable FIT image support

Signed-off-by: Stefan Roese <sr@denx.de>

Ths old comment was quite screwed up. Replace it with a new version
that should be a bit more descriptive.

Signed-off-by: Stefan Roese <sr@denx.de>

The t3corp board has an Xilinx DS617 flash chip connected to the
onboard FPGA. This patch adds support for these chips. Board
specific flash accessor functions are needed, since the chips
can only be read correctly in 16bit mode.

Additionally the FPGA chip-selects are configured for device-paced
transfers (ready is enabled).

Signed-off-by: Stefan Roese <sr@denx.de>

Recent GCC (4.4+) performs out-of-line epilogues in some cases, when
optimizing for size.  It causes a link error for _restgpr_30_x (and similar)
if libgcc is not linked.

It actually increases size with very small binaries, due to the fixed size
of the out-of-line code, and not having any functions that actually need to
restore more than 2 or 3 registers.  But I don't see a way to turn it off,
other than asking GCC to optimize for speed -- which may also increase
size for some boards.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>

Aspenite is a Development Board for ASPEN/ARMADA168(88AP168) with
	* Processor upto 1.2GHz
        * Parallel 1Gb x8 DDR2-1066 MHz
        * 16 Mb x16 NOR, 4Gb x8 SLC NAND, footprint for SPI NOR
        * Footprints for eMMC/eSD NAND & MMC x8 card
        * 4-in-1 card reader (xD, MMC/SD/MS Pro), CF True IDE socket
        * SEAF memory board, subset of PISMO2
    With Peripherals:
        * 4.3” WVGA 24-bit LCD
        * Audio codecs (AC97 & I2S), TSI
        * VGA camera
        * Video in via 3 RCA jacks, and HDMI type C out
        * Marvell 88W8688 802.11bg/BT module
        * GPS RF IC
        * Dual analog mics & speakers, headset jack, LED, ambient light sensor
        * USB2.0 HS host  (A), OTG (micro AB)
        * FE PHY, PCIE Mini Card  slot
        * GPIO, GPIO expander with DIP switches for easier selection UART serial over USB, CIR

This patch adds basic board support with DRAM and UART functionality
The patch is tested for boot from DRAM using XDB

Signed-off-by: Mahavir Jain <mjain@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

This patch adds commonly used macros for ARMADA100 based
baords, Also some code reshuffled and updated for typos and comments

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

ARMADA 100 SoCs has NS16550 compatible UART peripheral
This patch enables the same for ARMADA100 platforms

Signed-off-by: Mahavir Jain <mjain@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

On some processors this ier register configuration is different
for ex. Marvell Armada100

This patch introduce CONFIG_SYS_NS16550_IER macro support to
unconditionally initialize this register.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

This patch adds the support MFP support for Marvell ARMADA100 SoCs

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

Most of the Marvell SoCs has Multi Function Pin (MFP) configuration registers
For ex. ARMADA100.

These registers are programmed to expose the specific functionality
associated with respective SoC Pins

This driver provides configuration APIs,
using them, configuration need to be done in board specific code

for ex- following code configures MFPs 107 and 108 for UART_TX/RX functionality

int board_early_init_f(void)
{
        u32 mfp_cfg[] = {
                /* Console on UART1 */
                MFP107_UART1_RXD,
                MFP108_UART1_TXD,
                MFP_EOC         /*End of configureation*/
        };
        /* configure MFP's */
        mfp_config(mfp_cfg);
        return 0;
}

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

ARMADA 100 Family processors are highly integrated SoCs
based on Sheeva_88SV331x-v5 PJ1 cpu core.
Ref: http://www.marvell.com/products/processors/applications/armada_100



SoC versions Supported:
1) ARMADA168/88AP168	(Aspen P)
2) ARMADA166/88AP166	(Aspen M)
3) ARMADA162/88AP162	(Aspen L)

Contributors:
Eric Miao <eric.y.miao@gmail.com>
Lei Wen <leiwen@marvell.com>
Mahavir Jain <mjain@marvell.com>

Signed-off-by: Mahavir Jain <mjain@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

- serial console in PSC1
- 128MiB DRAM
- 32MiB Flash
- FEC Ethernet
- 2 I2C busses
- FPGA on CS3
- IDE
- VGA SMI501

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

This patch fixes the acadia_nand and kilauea_nand linker scripts
which have been missing in commit ee8028b7 [ppc4xx: Cleanup for
partial linking and --gc-sections]

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Bernhard Weirich <Bernhard.Weirich@riedel.net>

Make code build with older tool chains.

Signed-off-by: Wolfgang Denk <wd@denx.de>