Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

Build flash.bin for i.MX8MQ, it will include signed hdmi firmware,
spl, ddr firmware, fit image(bl31.bin, u-boot-nodtb.bin, dtb).
Burn it to 33KB offset of SD card.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

The mkimage_fit_atf.sh SPL FIT generator script requires
u-boot-nodtb.bin, but this was not enforced by the Makefile. This could
cause the generator script to be executed before u-boot-nodtb.bin has
been created.

Signed-off-by: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

As many targets are now commonly built with gcc-6 or later (which
defaults to a newer C standard than older compilers), certain C
constructs are now being used as they produce more readable code.  And
while all compilers that we support building with support the C11
standard (and GNU11) they do not default to that standard.  Ensure that
we pass along -std=gnu11 when building.

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Files *.so are generated files. So the clean target should delete them.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

Files *.efi are generated files. So the clean target should delete them.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>

Align Kconfig to Linux 4.17-rc4 with minimal impact on non-kconfig files.

Previous Kconfig sync was done by commit bf7ab1e7 ("kconfig:
re-sync with Linux 4.10") and it achieved almost perfect alignment with
a few (intended) exceptions, caused by below U-boot commits:

[A] v2015.04 5f9eb220 ("kbuild: remove scripts/multiconfig.sh")
[B] v2015.07 20c20826 ("Kconfig: Enable usage of escape char '\' in string values")
[C] v2016.01 da58dec8 ("Various Makefiles: Add SPDX-License-Identifier tags")
[D] v2016.03 5b8031cc ("Add more SPDX-License-Identifier tags")
[E] v2016.03 192bc694 ("Fix GCC format-security errors and convert sprintfs.")

Here is the list of Kconfig commits which followed the v4.10 alignment:

[F] v2018.01 0931ed3c ("kconfig/symbol.c: use correct pointer type argument for sizeof")
[G] v2018.03 1414e09b ("kconfig: revert change that was not needed for -Wformat-security")
[H] v2018.05 83d290c5 ("SPDX: Convert all of our single license tags to Linux Kernel style")

Commit [F] was subsequently applied to Linux kernel as commit [I]
with the same patch id, so it won't contribute to further misalignment.

[I] v4.15-rc1 88127dae6ed9 ("kconfig/symbol.c: use correct pointer type argument for sizeof")

Commit [G] is a Kconfig-specific revert of commit [E].
Commit [H] relocated and reformatted the license doing no functional change.

In summary, the only functional change that makes U-boot Kconfig
diverge from Linux Kconfig is commit [B]. After a brief analysis,
the purpose of [B] seems to be placing "\n" literals in string symbols
like CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" in order to pass
them directly to printf and expect correct output at runtime. Currently,
Linux doesn't seem to have this requirement, so for the moment [B] looks
like a U-boot specific feature/fix. From point of view of further Kconfig
alignment and backporting efforts, it is highly desired that commits
like [B] are propagated to Linux and any Kconfig fixes/features are
contributed to Linux kernel first. This specific Kconfig re-sync just
keeps [B] in place.

Contrary to 4.10 Kconfig re-sync (which achieves zero non-kconfig
changes), 4.17-rc4 re-sync does some amount of updates in Kbuild
(striving to keep them at minimum), due to a number of reasons:
* Kbuild is affected by the removal of Kconfig "*shipped" files and now
  requires flex and bison pre-installed on the host.
* PYTHON{2,3} variables are defined in top-level Makefile as
  prerequisite for running the newly developed Kconfig unit tests.
* silentoldconfig becomes an "internal implementation detail" deprecated
  for external use, being renamed to syncconfig.

The exact non-kconfig files touched by this commit are:

$ git show --format="" --stat -- ':!scripts/kconfig'
 .gitignore             |  2 ++
 Makefile               |  9 +++++++--
 scripts/Makefile.build | 11 +++++++++++
 scripts/Makefile.lib   | 41 ++++++++++++-----------------------------

The imported Linux commits touching the above files are:

c054be10ffdbd5   ("remove gperf left-overs from build system")
73a4f6dbe70a1b   ("kbuild: add LEX and YACC variables")
033dba2ec06c47   ("kbuild: prepare to remove C files pre-generated by flex and bison")
eea199b445f64c   ("kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX")
e71de5ee08dcb0   ("kbuild: remove remaining use of undefined YACC_PREFIX")
d59fbbd09d5d6b   ("kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)")
911a91c39cabcb H ("kconfig: rename silentoldconfig to syncconfig")
59889300274569   (".gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore")
9a8dfb394c0467   ("kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile")
833e622459432e H ("genksyms: generate lexer and parser during build instead of shipping")
b23d1a241f4eb4 H ("kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically")
e9781b52d4e0e3 H ("kbuild: add PYTHON2 and PYTHON3 variables")

The commits marked with 'H' are assessed as "hard" (build will fail)
prerequisites and the rest of them are assessed as "soft" prerequisites
for the re-sync. In spite of relatively high number of non-H commits,
they belong to this Kconfig update topic-wise and decrease the number of
cherry pick conflicts for many commits in this series. Additional effort
can be put in eliminating the soft prerequisites, if really needed.

The commits which contributed to this Kconfig re-sync are listed below.
Whenever a conflict resolution has been performed (mostly by hand, but
sometimes automatically by git), it is revealed by the '!' sign in the
second column, which means a patch id mismatch between Linux and U-boot
commits:

9be3213b14d44f   ("gconfig: remove misleading parentheses around a condition")
ff85a1a80e0034   ("kconfig: Check for libncurses before menuconfig")
ad8181060788c8   ("kconfig: fix sparse warnings in nconfig")
cb77f0d623ff33 ! ("scripts: Switch to more portable Perl shebang")
bb3290d91695bb ! ("Remove gperf usage from toolchain")
c054be10ffdbd5   ("remove gperf left-overs from build system")
b24413180f5600 ! ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
9059a3493efea6 ! ("kconfig: fix relational operators for bool and tristate symbols")
2c37e08464a850   ("kconfig: Warn if choice default is not in choice")
33ca1a24866373   ("kconfig: Document the 'menu' struct")
52aede4ba5efd1   ("kconfig: Document the 'symbol' struct")
c873443430ebd1   ("kconfig: Sync zconf.y with zconf.tab.c_shipped")
9a826842ff2fbd   ("kconfig: Rename menu_check_dep() to rewrite_m()")
fa8cedaef814ce   ("kconfig: Clarify expression rewriting")
f77850d3fe0c96   ("kconfig: Clean up modules handling and fix crash")
e3b03bf29d6b99   ("kconfig: display recursive dependency resolution hint just once")
73a4f6dbe70a1b ! ("kbuild: add LEX and YACC variables")
033dba2ec06c47 ! ("kbuild: prepare to remove C files pre-generated by flex and bison")
29c833061c1d8c   ("kconfig: generate lexer and parser during build instead of shipping")
26e47a3c11a25c   ("kconfig: Don't leak symbol names during parsing")
24161a6711c945   ("kconfig: Don't leak 'source' filenames during parsing")
bc28fe1d5ede88   ("kconfig: Don't leak 'option' arguments during parsing")
0724a7c32a54e3   ("kconfig: Don't leak main menus during parsing")
ae7440ef0c8013   ("kconfig: Fix automatic menu creation mem leak")
5b1374b3b3c2fc   ("kconfig: Fix expr_free() E_NOT leak")
7cf33f88e29410   ("kconfig: Fix choice symbol expression leak")
05cccce580456d   ("kconfig: Document automatic submenu creation code")
0735f7e5def2ab   ("kconfig: Document important expression functions")
df60f4b92d3d0b   ("kconfig: Remove menu_end_entry()")
b92d804a51796b   ("kconfig: drop 'boolean' keyword")
6479f327dea60d   ("kconfig: Warn if there is more than one help text")
52e58a3caeba5d   ("kconfig: make input_mode static")
5a3dc717b3c785   ("kconfig: make xfgets() really static")
84dd95d4f87a0d   ("kconfig: make conf_unsaved a local variable of conf_read()")
765f4cdef6f80d   ("kconfig: use default 'yy' prefix for lexer and parser")
eea199b445f64c   ("kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX")
e71de5ee08dcb0   ("kbuild: remove remaining use of undefined YACC_PREFIX")
d59fbbd09d5d6b ! ("kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)")
3e41ba05b6d60c   ("kconfig: Document SYMBOL_OPTIONAL logic")
d3465af60f4471   ("kconfig: Clarify choice dependency propagation")
9d1a9e8bc18bea   ("kconfig: Document 'if' flattening logic")
b53688014e3325   ("kconfig: Clarify menu and 'if' dependency propagation")
d0fd0428ecf04b   ("kconfig: fix make xconfig when gettext is missing")
312ee68752faaa   ("kconfig: announce removal of oldnoconfig if used")
1ccb27143360bd   ("kconfig: make "Selected by:" and "Implied by:" readable")
cedd55d49dee94 ! ("kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help")
1b9eda2e4892cb   ("kconfig: Warn if help text is blank")
cb67ab2cd2b8ab   ("kconfig: do not write choice values when their dependency becomes n")
4f208f392103e8   ("kconfig: show '?' prompt even if no help text is available")
cd58a91def2acc   ("kconfig: remove 'config*' pattern from .gitignnore")
d2a04648a5dbc3   ("kconfig: remove check_stdin()")
f3ff6fb5db68bc   ("kconfig: echo stdin to stdout if either is redirected")
9e3e10c725360b   ("kconfig: send error messages to stderr")
d717f24d8c6808   ("kconfig: add xrealloc() helper")
523ca58b7db2e3   ("kconfig: remove const qualifier from sym_expand_string_value()")
cd81fc82b93fa4   ("kconfig: add xstrdup() helper")
f4bc1eefc1608e   ("kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list")
bf0bbdcf100322   ("kconfig: Don't leak choice names during parsing")
1a90ce36c6eff6   ("kconfig: Update ncurses package names for menuconfig")
5ae6fcc4bb82bd   ("kconfig: fix line number in recursive inclusion error message")
07a422bb213adb ! ("kbuild: restore autoksyms.h touch to the top Makefile")
9a47ceec543bfb   ("kconfig: clean-up reverse dependency help implementation")
d9119b5925a03b   ("kconfig: Print reverse dependencies in groups")
f467c5640c29ad   ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols")
59a80b5e892dde   ("kconfig: do not call check_conf() for olddefconfig")
4bb3a5b085cd6f   ("kconfig: remove unneeded input_mode test in conf()")
99f0b6578bab44   ("kconfig: remove redundant input_mode test for check_conf() loop")
2aad9b89621386   ("kconfig: hide irrelevant sub-menus for oldconfig")
81d2bc2273052e   ("kconfig: invoke oldconfig instead of silentoldconfig from local*config")
911a91c39cabcb ! ("kconfig: rename silentoldconfig to syncconfig")
2a61625835c7c8 ! ("kconfig: remove redundant streamline_config.pl prerequisite")
022a4bf6b59dfd   ("kconfig: tests: add framework for Kconfig unit testing")
1903c511905984   ("kconfig: tests: add basic choice tests")
49ac3c0c3aa3b7   ("kconfig: tests: test automatic submenu creation")
b76960c0f6b25d   ("kconfig: tests: test if new symbols in choice are asked")
930c429a656fdb   ("kconfig: tests: check unneeded "is not set" with unmet dependency")
ee236610653ede   ("kconfig: tests: check visibility of tristate choice values in y choice")
beaaddb625400e   ("kconfig: tests: test defconfig when two choices interact")
3e4888c2e3d77d   ("kconfig: tests: test randconfig for choice in choice")
29c434f367ea7b   ("kconfig: tests: test if recursive dependencies are detected")
e2c75e7667c737   ("kconfig: tests: test if recursive inclusion is detected")
f622f827958162   ("kconfig: warn unmet direct dependency of tristate symbols selected by y")
f8f69dc0b4e070   ("kconfig: make unmet dependency warnings readable")
26561514cc9def   ("kconfig: do not include both curses.h and ncurses.h for nconfig")
32a94b8b0c3e5a   ("kconfig: remove duplicated file name and lineno of recursive inclusion")
379a8eb8eb1a55   ("kconfig: detect recursive inclusion earlier")
18492685e479fd   ("kconfig: use yylineno option instead of manual lineno increments")
59889300274569 ! (".gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore")
9a8dfb394c0467 ! ("kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile")
833e622459432e ! ("genksyms: generate lexer and parser during build instead of shipping")
b23d1a241f4eb4 ! ("kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically")
17baab68d337a0   ("kconfig: extend output of 'listnewconfig'")
e9781b52d4e0e3 ! ("kbuild: add PYTHON2 and PYTHON3 variables")

The current Kconfig update generates below build-time warnings:
  YACC    scripts/dtc/dtc-parser.tab.h
scripts/dtc/dtc-parser.y: warning: 3 shift/reduce conflicts [-Wconflicts-sr]
  YACC    scripts/dtc/dtc-parser.tab.c
scripts/dtc/dtc-parser.y: warning: 3 shift/reduce conflicts [-Wconflicts-sr]

This seems to happen because the Kbuild updates apparently didn't make
room for both "*shipped"-based builds and flex/bison-based builds. A
similar problem has been reported for genksyms parser in v4.17-rc1
commit 833e622459432e ("genksyms: generate lexer and parser during build
instead of shipping"). I have figured out empirically that the warnings
are healed after updating the in-tree U-boot DTC to upstream v1.4.6-9,
same as done by Linux v4.17-rc1 commit 9130ba88464032 ("scripts/dtc:
Update to upstream version v1.4.6-9-gaadd0b65c987"). Whether fixing the
DTC-related yacc warnings should be done together with the Kconfig
re-sync, I would like to hear from community.

My testing was limited to:
- make defconfig all
- make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- r8a7795_ulcb_defconfig all
- comparing .config before and after the re-sync
- running the newly imported Kconfig unit tests as seen below:

$ make testconfig
Tested-by: Petr Vorel <petr.vorel@gmail.com>

============================= test session starts =============================
scripts/kconfig/tests/auto_submenu/__init__.py::test PASSED             [  7%]
scripts/kconfig/tests/choice/__init__.py::test_oldask0 PASSED           [ 14%]
scripts/kconfig/tests/choice/__init__.py::test_oldask1 PASSED           [ 21%]
scripts/kconfig/tests/choice/__init__.py::test_allyes PASSED            [ 28%]
scripts/kconfig/tests/choice/__init__.py::test_allmod PASSED            [ 35%]
scripts/kconfig/tests/choice/__init__.py::test_allno PASSED             [ 42%]
scripts/kconfig/tests/choice/__init__.py::test_alldef PASSED            [ 50%]
scripts/kconfig/tests/choice_value_with_m_dep/__init__.py::test PASSED  [ 57%]
scripts/kconfig/tests/err_recursive_inc/__init__.py::test PASSED        [ 64%]
scripts/kconfig/tests/inter_choice/__init__.py::test PASSED             [ 71%]
scripts/kconfig/tests/new_choice_with_dep/__init__.py::test PASSED      [ 78%]
scripts/kconfig/tests/no_write_if_dep_unmet/__init__.py::test PASSED    [ 85%]
scripts/kconfig/tests/rand_nested_choice/__init__.py::test PASSED       [ 92%]
scripts/kconfig/tests/warn_recursive_dep/__init__.py::test PASSED       [100%]
========================== 14 passed in 0.34 seconds ==========================

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>

Following the conversion of the SPDX license tags, a number of files
compiled with -pedantic now generate warnings similar to the following
for using C99-style '//' comments in ISO C90 code:

  tools/gen_eth_addr.c:1:1: warning: C++ style comments are not allowed in ISO C90
   // SPDX-License-Identifier: GPL-2.0+
   ^

The SPDX comment-style change means that these files have adopted C99,
so need to change the language-standard to --std=gnu99 or --std=gnu11
to let the compiler know this.

As we now require GCC 6 or newer for the cross-compiler, the project has
implicitly moved the project to GNU11: let older GCC versions on various
Linux distros know to treat our host tools as GNU11 as well.

References: commit 83d290c5 ("SPDX: Convert all of our single license tags to Linux Kernel style")
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

The __FILE__ macro is used everywhere in U-Boot to locate the file
printing the log message, such as WARN_ON(), etc.  If U-Boot is
built out of tree, this can be a long absolute path.

This is because Kbuild runs in the objtree instead of the srctree,
then __FILE__ is expanded to a file path prefixed with $(srctree)/.

A brand-new option from GCC, -fmacro-prefix-map, solves this problem.
If your compiler supports it, __FILE__ is the relative path from the
srctree regardless of O= option.  This provides more readable log,
more reproducible builds, and smaller image size.

[ Linux commit: a73619a845d5625079cc1b3b820f44c899618388 ]

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Re-sync the logic about which clang warnings to disable from v4.17-rc1.
Note that we don't disable all of the same ones as for now we haven't
run into any cases of warnings from clang in code from upstream Linux.

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

The current makefile logic disables creation of the
SPL.log/u-boot-ivt.img.log etc. files when V=1 is given on the command
line, the rationale presumably being that the user wants and gets the
information on the console.

However, from general principles, I don't think a higher V= level
should affect which build artifacts get generated (and certainly
shouldn't produce fewer). Concretely, it's also a problem that when
doing a V=1 build in a terminal, the relevant HAB blocks lines easily
drown in all the other V=1 output.

Moreover, build systems such as Yocto by default pass V=1, so in that
case the information gets hidden away in the do_compile log file, making
it nigh impossible to create a recipe for creating signed U-boot images
- I don't want to disable V=1, because having verbose output in the log
file is valuable when things go wrong, but OTOH trying to go digging in
the do_compile log file (and getting exactly the right lines) is not
pleasant to even think about.

So change the logic so that for V=0, the mkimage output is redirected
to MKIMAGEOUTPUT (which is also the current behaviour), while for any
other value of V, we _additionally_ write the information to make's
stdout, whatever that might be.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Tested-by: Breno Lima <breno.lima@nxp.com>

Make it possible to use gcc code coverage analysis.

v1 -> v2:
 - Kconfig: remove not needed 'default n'
 - Makefile: use consistent spacing

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

Modifying the default environment via CONFIG_EXTRA_ENV_SETTINGS is
somewhat inflexible, partly because the cpp language does not allow
appending to an existing macro. This prevents reuse of "environment
fragments" for different boards, which in turn makes maintaining that
environment consistently tedious and error-prone.

This implements a Kconfig option for allowing one to define the entire
default environment in an external file, which can then, for example, be
generated programmatically as part of a Yocto recipe, or simply be kept
in version control separately from the U-boot repository.

Tested-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Lukasz Majewski <lukma@denx.de>

With the most recent tools for ARC (arc-2017.09) in case of
"naked" function compiler throws a warning:
---------------------------------->8-----------------------------
board/synopsys/hsdk/hsdk.c: In function 'hsdk_core_init_f':
board/synopsys/hsdk/hsdk.c:345:1: warning: stack usage computation not supported for this target
 }
 ^
---------------------------------->8-----------------------------

That happens because the compiler doesn't handle "naked" functions
as a special case where stack calculation shouldn't be done.

But for now until this is fixed in GCC to get clean buildman output
we're disabling stack-usage check for ARC.

See https://lists.denx.de/pipermail/u-boot/2018-April/324455.html


for more background.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Create u-boot-ivt.img and u-boot-ivt.img.log when building U-Boot
with SPL and Secure Boot enabled for imx7 (like it is done for imx6).

See commit d21bd69b for more info.

Signed-off-by: Eran Matityahu <eran.m@variscite.com>

In README.sunxi64 we tell the user how to optionally create
u-boot-sunxi-with-spl.bin by manually running cat. Instead, have the
build system create the file automatically just like it does for 32-bit
sunxi boards.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

We're going to need this logic for 64-bit builds as well, so move it
out from under arch/arm/cpu/armv7.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

The u-boot-spl.srec is needed for some platforms, add target to generate this file.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Tom Rini <trini@konsulko.com>

The u-boot-elf.srec is needed for some platforms, add target to generate this file.

Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com>
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Most of architectures have .text section situated in the very beginning
of U-Boot binary and thus it is very logical that CONFIG_SYS_TEXT_BASE
is used on final linkage step to specify where U-Boot gets linked to.

For that we pass the following construction to the LD:
---------------------------->8-----------------------
xxx-ld ...  -Ttext $(CONFIG_SYS_TEXT_BASE) ...
---------------------------->8-----------------------

But there could be exceptions. For example:
 1. In case of ARCv2 we want to put vectors table in its own section
    .ivt in front of .text section which means we need either add an
    offset to CONFIG_SYS_TEXT_BASE to compensate for .ivt or don't
    pass "-Ttext" to the LD at all and specify link base in linker
    script directly.

 2. Some architectures even though have .text section in the very
    beginning of the U-Boot image still use different symbols to
    specify link-base:
       * NIOS2: CONFIG_SYS_MONITOR_BASE (which I really like because
         that exactly what makes sense - where out image starts but not
         beginning of its .text section which just happened to match the
         whole image beginning)
       * EXTENSA: CONFIG_SYS_TEXT_ADDR
       * X86: Which doesn't use CONFIG_SYS_MONITOR_BASE in case of EFI
         otherwise sets explicit link base in u-boot.lds

I think that's good to allow for flexibility and don't require each and
every architecture or even platform to specify CONFIG_SYS_TEXT_BASE as well
as use it to set .text section location.

So let's only pass "-Ttext xxx" for those architectures who don't set
link-base explicitly in their linker scripts.

This patch iaddresses comments for previously sent
https://patchwork.ozlabs.org/patch/867540/

.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

The make macro to check if the binary exceeds the board size limit is not
called. Make sure that is the case.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

With CONFIG_SYS_INIT_SP_BSS_OFFSET enabled, the initial (pre-relocation)
stack is placed some distance after bss_start. The control DTB is appended
to the U-Boot binary at bss_start. If the DTB is too large, or the SP BSS
offset too small, then the initial stack could corrupt the DTB. Enhance
the Makefile to check whether this is likely to occur.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

Add prelink-riscv to arrange .rela.dyn and .rela.got
in compile time. So that u-boot can be directly
executed without fixup.

Signed-off-by: Chih-Mao Chen <cmchen@andestech.com>
Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>