Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Declared all functions that were not called outside the file as static

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

This fixes the following warnings when running MAKEALL for coldfire :
cmd_bdinfo.c:354: warning: 'print_eth' defined but not used

Signed-off-by: Philippe De Muyter <phdm at macqel.be>

Support for 16bpp was supposed to be in the code but was not working.
This makes it work and has been tested in the nhk8815 board.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

When issuing a nand scrub command, the entered character is not displayed
this may be confusing. This patch makes the input character being
displayed if it is a 'y' so that an user knows he is about to scrub his
nand.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Allow overwriting defined partitions in the device tree blob
using partition info defined in the 'mtdparts' environment
variable.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Gerald Van Baren <vanbaren@cideas.com>

Match history buffer size to console buffer size. History buffer size
was hard coded to 256, artificially limiting the command buffer size.
The history buffer now tracks CONFIG_SYS_CBSIZE.

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>

When CONFIG_SYS_CBSIZE equals MAX_CMDBUF_SIZE, a command string of
maximum length will overwrite part of the history buffer, causing the
board to die. Expand the console_buffer and hist_lines buffer by one
character each to hold the missing NULL char.

Signed-off-by: John Schmoller <jschmoller@xes-inc.com>

This patch add functionality to use memory addresses in expressions.
This increases the power of expressions substantially

It adheres to the standard convemtions: memory addresses can be given
in the format *address (e.g. *1000)

Rationale for this change is that it allows masking off bits from a
byte that is obtained by reading data from e.g. i2c.

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Fix warning: control reaches end of non-void function
Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

according to some of the comments the subaddress length is 1 or 2, but we are being
prepared for the case it becomes 3. However the code also accepted 4.
This repairs this by changing the constand 4 to 3.

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

If a board uses cfb_console driver and splash image
and also defines CONFIG_SILENT_CONSOLE, the user is
locked out even if "silent" is not set. It is not
possible to get any output, neither on vga console
device nor on serial console after redirecting the
output to the serial console, since the GD_FLG_SILENT
flag remains set.

Fix the problem by redirecting the output from frame
buffer to serial console if splashimage is used.
Only suppress the output if "silent" environment
variable was set and don't set the GD_FLG_SILENT
flag arbitrarily.

Signed-off-by: Anatolij Gustschin <agust@denx.de>

This patch removes the \n after the help message for mmcinfo.
This resulted in an empty line being displayed after the mmcinfo line
when the help command was given.

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

Coding style cleanup, update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>

The length of configured MTDPARTS_DEFAULT string
could be greater than console printbuffer size.
Replace printf() by puts() to avoid potential buffer
overflows.

Signed-off-by: Anatolij Gustschin <agust@denx.de>

The auto-update feature (CONFIG_UPDATE_TFTP) requires that the env
variable serverip be set for the TFTP access. If DHCP is to be used
to get the serverip env variable, this doesn't work as DHCP happens
after the auto-update attempt has run. A solution is to run DHCP in
PREBOOT, but even this is too late.

To solve this, we move update_tftp() below the PREBOOT stuff.

Signed-off-by: Wolfgang Denk <wd@denx.de>

This patch uses gd->relocaddr variable to store uboot's relocated
address in RAM and shows it in bdinfo command.

This patch moves CONFIG_AMIGAONEG3SE style copying of the address
in board_init_f to just before relocation is actually done.

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Tested-by: Detlev Zundel <dzu@denx.de>

fix pointer dereferencing
if the size is .b and .w an 8 or 16 bit access is done.

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>

This patch fixes a problem I've notived on a buggy PPC4xx system. This
system has problems with the PHY MDIO communication and seemed to be
stuck/crashed in miiphy_reset(). But degugging revealed, that the CPU
didn't crash, but "only" hung in this counting loop for about 2 minutes.

This patch now uses a real timeout of 0.5 seconds (as mentioned in the
comment in miiphy_reset).

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

This patch changes usb_control_msg back to the state prior to commit
48867208.

The USB driver ISR routine may update the status.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

Fix compile error:

	cmd_ximg.c: In function 'do_imgextract':
	cmd_ximg.c:234: error: 'i' undeclared (first use in this function)
	cmd_ximg.c:234: error: (Each undeclared identifier is reported only once
	cmd_ximg.c:234: error: for each function it appears in.)

Signed-off-by: Wolfgang Denk <wd@denx.de>

Not all boards defining LCD_COLOR16 are able to set
lcd_color_fg/lcd_color_bg correctly. The issue seems to
be caused by CONFIG_ATMEL_LCD ifdefs in lcd_setfgcolor()
and lcd_setbgcolor(). Actually, the color values passed
to these functions are already correct, we don't need
to fix them. So remove ifdefs here.

Reported-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

env_nand.c would crash silently if a malloc() for the environment
buffers failed; make it print an error message and fail gracefully,
i. e. use the default environment then.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: John Rigby <jcrigby@gmail.com>

Add a disable sub-command to the cpu command that allows for disabling
cores in multicore processors.  This can be useful for systems that are
using multicore chips but aren't utilizing all the cores as a way to
reduce power and possibly improve performance.

Also updated an added missing copyright.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

imxtract currently can not handle compressed images. This patch adds
handling for bzip2 and zip compression. In both cases, a destination
address has to be specified for extraction.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>

Commit b5b004ad caused the sector_size to
be calculated incorrectly when the part size was not hardcoded.  This is
because the new code relied on part->size but tried to do the calculation
before it was initialized properly, and it did not take into consideration
the magic SIZE_REMAINING define.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

If you really want to slim down U-Boot and you would rather use a higher
compression scheme (like LZMA), it'd be nice to disable gzip/zlib since
these code bases take up a significant amount of space.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This patch adds support for "imximage" (MX Boot Image)
to the mkimage utility. The imximage is used on the Freescales's
MX.25, MX.35 and MX.51 processors.

Further details under doc/README.imximage.

This patch was tested on a Freescale mx51evk board.

Signed-off-by: Stefano Babic <sbabic@denx.de>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

cramfsls and cramfsload are added to the command list.
A cramfs placed at 'cramfs_addr' can the be listed with 'cramfsls' and files
can be loaded with 'cramfsload'. 'cramfs_addr' is an environment variable
specifying the address the cramfs is located.
This works for powerpc and for ARM.

Use CONFIG_CMD_CRAMFS.

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
Signed-off-by: Heiko Schocher <hs@denx.de>

Add redundant environment support for environment lying on a EEPROM.

Tested on uppcoming suen3 support

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>

- CONFIG_ENV_EEPROM_IS_ON_I2C
  define this, if you have I2C and SPI activated, and your
  EEPROM, which holds the environment, is on the I2C bus.

- CONFIG_I2C_ENV_EEPROM_BUS
  if you have an Environment on an EEPROM reached over
  I2C muxes, you can now define, how to reach this
  EEPROM.

Signed-off-by: Heiko Schocher <hs@denx.de>

Current code uses the second argument to bootm for standalone images to
override the load address specified in the image instead of passing all
parameters as is to the application.  This behaviour is not documented
and not in line with how the go command works for standalone applications,
so we simply drop it.

Signed-off-by: Detlev Zundel <dzu@denx.de>

In case we boot an image marked as 'standalone' and 'linux', the current
code erroneously tried to load a ramdisk.

Signed-off-by: Detlev Zundel <dzu@denx.de>