CONFIG_OF_EMBED=y is the option which is here only for testing purpose
and shouldn't be enabled by default as is describe at:
"dts: Add a comment about CONFIG_OF_EMBED being for local use"
(sha1: 3d3f60cb)

But still enabling this option locally shouldn't end up with compilation
error when you build SPL. This patch fix it.

Compilation error:
lib/built-in.o: In function `fdtdec_setup':
/mnt/disk/u-boot/lib/fdtdec.c:1246: undefined reference to
`__dtb_dt_begin'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reported-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Dear u-boot community,

I just made a small change on the openrisc-generic platform
configuration to take in account the new naming convention (or1k instead
of or32, so the build process gets fine).

Could you take care to review and approve the following patch, please?

Kind regards,

Looks like one spot got missed. Probably due to the backslash.

Signed-off-by: Andy Fleming <afleming@gmail.com>

-> Add National instrument ethernet transceiver configuration used (DP83848)
-> Change cpsw slave phy address
-> modify nand configuration to use the correct ECC and correct nand features

CONFIG_AHCI_SETFEATURES_XFER is not selected by any user, so delete
the dead code.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

get_clocks is wrapped by CONFIG_FSL_CLK and CONFIG_M68K in seperate
piece code. They can be merged into one snippet.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: "angelo@sysam.it" <angelo@sysam.it>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: "Andreas Bießmann" <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Angelo Dureghello <angelo@sysam.it>

CONFIG_BOOTDELAY is defined in config_distro_defaults.h

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
[trini: Drop omap3_logic.h settings which were a warning and no longer
        correct usage].
Signed-off-by: Tom Rini <trini@konsulko.com>

By reading 2 consecutive bytes from i2c to an u16 value
we have an endianess issue.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Since busses are sorted in alphabetical order, introducing more
than nine busses led to unexpected behaviour.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

osdsize adjusts the gdsys IHS osd dimensions in characters.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

hrcon DH(dual head) has two video outputs per FPGA.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

- i2c addresses for the videoboard port expanders were
  wrong.
- the fpga reset signal was not initialized.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

The strider platform moved some generic code into ioep-fpga.c.
Make use of that on hrcon platform.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

The gdsys strider board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.

On board peripherals include:
- 1x 10/100 Mbit/s Ethernet (optional)
- Lattice ECP3 FPGA connected via eLBC

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
[trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now]
Signed-off-by: Tom Rini <trini@konsulko.com>

hrcon has no CH7301 DVI-transmitter.
Probably not removed when copying from iocon.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

- Reset FPGAs in last_stage_init()

Signed-off-by: Reinhard Pfau <pfau@gdsys.de>
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

Support dlvision-10g hardware with displayport output.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

DP501 only supports DP 1.1a.
Limit settings for link bandwidth and lane count to
values allowed by DP 1.1a.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>

With Club 3D dual link adapter there are AUX-channel timeouts
when EDID is read. Increasing retry interval time to max (400us)
fixes this.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Reviewed-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Reviewed-by: Heiko Schocher <hs@denx.de>

Bus has to be held for repeated start regardless of
read/write access.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Acked-by: Heiko Schocher <hs@denx.de>

Reinhard Pfau complained that macros in ihs_i2c do not follow best practices.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Acked-by: Heiko Schocher <hs@denx.de>

Support two i2c masters per FPGA.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Acked-by: Heiko Schocher <hs@denx.de>

Fix below warnings happening for xilinx_zynqmp_ep_defconfig

drivers/net/zynq_gem.c: In function ‘zynq_gem_init’:
drivers/net/zynq_gem.c:330:7: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
      ((u32)(priv->rxbuffers) +
       ^
In file included from drivers/net/zynq_gem.c:19:0:
drivers/net/zynq_gem.c:336:10: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
   writel((u32)priv->rx_bd, &regs->rxqbase);
          ^
./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’
 #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
                                  ^
drivers/net/zynq_gem.c: In function ‘zynq_gem_send’:
drivers/net/zynq_gem.c:399:9: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  writel((u32)priv->tx_bd, &regs->txqbase);
         ^
./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’
 #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
                                  ^
drivers/net/zynq_gem.c:404:22: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  priv->tx_bd->addr = (u32)ptr;
                      ^
drivers/net/zynq_gem.c:409:9: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  addr = (u32) ptr;
         ^
drivers/net/zynq_gem.c:414:9: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  addr = (u32)priv->rxbuffers;
         ^
drivers/net/zynq_gem.c: In function ‘zynq_gem_recv’:
drivers/net/zynq_gem.c:454:31: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
   net_process_received_packet((u8 *)addr, frame_len);
                               ^
drivers/net/zynq_gem.c: In function ‘zynq_gem_initialize’:
drivers/net/zynq_gem.c:533:35: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE);
                                   ^
drivers/net/zynq_gem.c:533:16: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
  priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE);

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

Fix below compilation warings happening for hikey_defconfig

drivers/usb/eth/smsc95xx.c:698:56: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg);
                                                        ^
include/common.h:109:26: note: in definition of macro ‘debug_cond’
    printf(pr_fmt(fmt), ##args); \
                          ^
drivers/usb/eth/smsc95xx.c:698:2: note: in expansion of macro ‘debug’
  debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg);
  ^
drivers/usb/eth/smsc95xx.c:718:2: warning: format ‘%u’ expects argument of
type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ [-Wformat=]
  debug("Tx: len = %u, actual = %u, err = %d\n",
  ^
drivers/usb/eth/smsc95xx.c: In function ‘smsc95xx_recv’:
drivers/usb/eth/smsc95xx.c:802:19: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
   cur_buf_align = (int)buf_ptr - (int)recv_buf;
                   ^
drivers/usb/eth/smsc95xx.c:802:34: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
   cur_buf_align = (int)buf_ptr - (int)recv_buf;

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

Fix below compilation warings happening for hikey_defconfig

drivers/mmc/dw_mmc.c: In function ‘dwmci_set_idma_desc’:
drivers/mmc/dw_mmc.c:43:20: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac);
                    ^
drivers/mmc/dw_mmc.c: In function ‘dwmci_prepare_data’:
drivers/mmc/dw_mmc.c:61:35: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
  dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac);
                                   ^
drivers/mmc/dw_mmc.c:73:9: warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]
         (u32)bounce_buffer + (i * PAGE_SIZE));
         ^
  CC      drivers/mmc/hi6220_dw_mmc.o
drivers/mmc/hi6220_dw_mmc.c: In function ‘hi6220_dwmci_add_port’:
drivers/mmc/hi6220_dw_mmc.c:51:17: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
  host->ioaddr = (void *)regbase;

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

Fix below compilation warnings-
drivers/gpio/hi6220_gpio.c: In function ‘hi6220_gpio_probe’:
drivers/gpio/hi6220_gpio.c:82:15: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
  bank->base = (u8 *)plat->base;

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

This fixes compilation problems when using a hardfloat toolchain on
ARM, which manifest themselves as "libgcc.a(_udivmoddi4.o) uses
VFP register arguments, u-boot does not".

These problems have been reported in the U-Boot mailing list:
    http://lists.denx.de/pipermail/u-boot/2015-October/230314.html
    http://lists.denx.de/pipermail/u-boot/2015-October/231908.html



Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

short strings can be used in type parameter of gpt command
to replace the guid string for the types known by u-boot

      partitions = name=boot,size=0x6bc00,type=data; \
                   name=root,size=0x7538ba00,type=linux;
      gpt write mmc 0 $partitions

and they are also used to display the type of partition
in "part list" command

  Partition Map for MMC device 0  --   Partition Type: EFI

  Part	Start LBA	End LBA		Name
	Attributes
	Type GUID
	Partition GUID
    1	0x00000022	0x0000037f	"boot"
	attrs:	0x0000000000000000
	type:	ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
	type:	data
	guid:	d117f98e-6f2c-d04b-a5b2-331a19f91cb2
    2	0x00000380	0x003a9fdc	"root"
	attrs:	0x0000000000000000
	type:	0fc63daf-8483-4772-8e79-3d69d8477de4
	type:	linux
	guid:	25718777-d0ad-7443-9e60-02cb591c9737

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>

code under flag CONFIG_PARTITION_TYPE_GUID
add parameter "type" to select partition type guid

example of use with gpt command :

  partitions = uuid_disk=${uuid_gpt_disk}; \
      name=boot,size=0x6bc00,uuid=${uuid_gpt_boot}; \
      name=root,size=0x7538ba00,uuid=${uuid_gpt_root}, \
         type=0fc63daf-8483-4772-8e79-3d69d8477de4;

  gpt write mmc 0 $partitions

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>

Previously, Linux used the same GUID for the data partitions as Windows
(Basic data partition: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7).
This created problems when dual-booting Linux and Windows in UEFI-GPT
Setup, so a new GUID (Linux filesystem data:
0FC63DAF-8483-4772-8E79-3D69D8477DE4) was defined jointly by GPT fdisk
and GNU Parted developers.

Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>

When converting between PCI bus and phys addresses, a two pass search
was introduced with preference to non-PCI_REGION_SYS_MEMORY regions.
See commit 2d43e873.

However, since PCI_REGION_MEM is defined as 0, the if statement was
always asserted true: ((flags & PCI_REGION_MEM) == PCI_REGION_MEM)

This patch uses PCI_REGION_TYPE bit to check if the region is
PCI_REGION_MEM: ((flags & PCI_REGION_TYPE) == PCI_REGION_MEM)

Signed-off-by: Cheng Gu <chenggu@marvell.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Condense these updates down to SPDX tags too while doing this.  This is
a port of a1452a3771c4eb85bd779790b040efdc36f4274e from the Linux
Kernel.

Signed-off-by: Tom Rini <trini@konsulko.com>

On the BeagleBone these i2c1 pins are routed to the expanasion header, where
they can be defined as either pr1_usart0_Xxd/pwm0/spi0/i2c1, dont assume i2c1

Fixes: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/313894/1387696



Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com>
CC: Tom Rini <trini@konsulko.com>

The Cubietruck has a mini-USB connector that can be used to power up the
board and as an OTG connector.

Since we have already some USB host-only ports right beside this one,
enable it in gadget mode

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The A13-Olinuxino has a mini-USB connector that can be used to power up
the board and as an OTG connector.

Since we have already some USB host-only ports right beside this one,
enable it in gadget mode

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

The Android sparse image format is currently supported through a file
called aboot, which isn't really such a great name, since the sparse image
format is only used for transferring data with fastboot.

Rename the file and header to a file called "sparse", which also makes it
consistent with the header defining the image structures.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Tom Rini <trini@konsulko.com>