Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>

Ensure that wrong bitstream won't be loaded
to current device.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>

All fpga functions use devnum as int. Only fpga_loadbitstream
is using it as unsinged long dev.
This patch synchronize it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>

In bitstream decoding you can directly check device
which you want to load and in fpga.c are fpga_validate
and fpga_dev_info functions which should be used for it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>

CONFIG_FPGA in past was a bitfield where bits
were use for vendor identification.

This fix should be the part of this commit:
"Improve configuration of FPGA subsystem"
(sha1: 0133502e)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>

No functional changes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>

Fix compiler warning:

cmd_fpga.c:318: warning: passing argument 3 of 'fit_image_get_data'
from incompatible pointer type

Adding the needed 'const' here entails a whole bunch of additonal
changes all over the FPGA code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andre Schwarz <andre.schwarz@matrix-vision.de>
Cc: Murray Jensen <Murray.Jensen@csiro.au>
Acked-by: Andre <Schwarz&lt;andre.schwarz@matrix-vision.de>

Commit 3b8ac464 "FPGA: add support for downloading Lattice bitstream"
added support for Lattice devices, but failed to add #ifdef's that are
needed when building for non-Lattice devices, which results in build
failures like these:

Configuring for GEN860T board...
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dev_info':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:145: undefined reference to `lattice_info'
drivers/fpga/libfpga.a(fpga.o): In function `fpga_dump':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:269: undefined reference to `lattice_dump'
drivers/fpga/libfpga.a(fpga.o): In function `fpga_load':
/home/wd/git/u-boot/work/drivers/fpga/fpga.c:233: undefined reference to `lattice_load'
make: *** [u-boot] Error 1

Add the missing code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>

The patch adds support to load a Lattice's bitstream
image (called VME file) into a Lattice FPGA. The code
containing the state machine delivered as part of
Lattice's ispVMtools is integrated.

The FPGA is programmed using the JTAG interface. The
board maintainer must provide accessors to drive the
JTAG signals TCK, TMS, TDI and to get the value of the
input signal TDO.

Signed-off-by: Stefano Babic <sbabic@denx.de>

PPC boards are the only users of the current FPGA code which is littered
with manual relocation fixups.  Now that proper relocation is supported
for PPC boards, remove FPGA manual relocation.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Adds Support for Altera's Stratix II.

Within your board specific init file you will have to call

1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);

Altera_desc* contines (for example):
	{
	 Altera_StratixII,	/* part type */
	 passive_serial,	/* interface type */
	 1,			/* bytes of data part can accept */
	 (void *)(&funcs),	/* interface function table */
	 0L,			/* base interface address */
	 0			/* implementation specific cookie */
	 }

funcs is the interface. It is of type altera_board_specific_func.
It looks like this:
altera_board_specific_func func = {
	pre_fn,
	config_fn,
	status_fn,
	done_fn,
	clk_fn,
	data_fn,
	abort_fn,
	post_fn,
};

you will have to implement these functions, which is usually bit
banging some gpio.

Signed-off-by: Eran Liberty <liberty@extricom.com>

This patch removes the FPGA subsystem configuration through
the CONFIG_FPGA bitmask configuration option.

See README for the new options:

	CONFIG_FPGA,
	CONFIG_FPGA_<vendor>,
	CONFIG_FPGA_<family>

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)