The main purpose of this rewrite it to be able to share the same
initialization code on all FSL PowerPC products that have DDR
controllers.  (83xx, 85xx, 86xx).

The code is broken up into the following steps:
	GET_SPD
	COMPUTE_DIMM_PARMS
	COMPUTE_COMMON_PARMS
	GATHER_OPTS
	ASSIGN_ADDRESSES
	COMPUTE_REGS
	PROGRAM_REGS

This allows us to share more code an easily allow for board specific code
overrides.

Additionally this code base adds support for >4G of DDR and provides a
foundation for supporting interleaving on processors with more than one
controller.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Provide a helper function that will setup the last available
LAWs (upto 2) for DDR.  Useful for SPD/dyanmic DDR setting code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Also adds helper functions for DDR1/2 to verify the checksum.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Heiko Schocher <hs@denx.de>

- Remove unused global variable os_data_count.
- Remove unused variable z.

Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>

MVS1 board has reached end-of-life and can be removed completely.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

There is no need for each OS specific function to call do_reset() we
can just do it once in bootm. This means its feasible on an error for
the OS boot function to return.

Also, remove passing in cmd_tbl_t as its not needed by the OS boot
functions.  flag isn't currently used but might be in the future so
we left it alone.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Resize the fdt to size + padding to 4k boundary

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Created a new fdt_initrd() to deal with setting the initrd properties
in the device tree and fixing up the mem reserve.  We can use this
both in the choosen node handling and lets us remove some duplicated
code when we fixup the initrd info in bootm on PPC.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Move the fdt resizing code out of ppc specific boot code and into
common fdt support code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Created a bootm_start() that handles the parsing and detection of all
the images that will be used by the bootm command (OS, ramdisk, fdt).
As part of this we now tract all the relevant image offsets in the
bootm_headers_t struct. This will allow us to have all the needed
state for future sub-commands and lets us reduce a bit of arch
specific code on SPARC.

Created a bootm_load_os() that deals with decompression and loading
the OS image.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

To allow for persistent state between future bootm subcommands we
need the lmb to exist in a global state.
Moving it into the bootm_headers_t allows us to do that.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Set the fdt working address so "fdt FOO" commands can be used as part
of the bootm flow.  Also set an the environment variable "fdtaddr"
with the value.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Move the code that handles finding a device tree blob and relocating
it (if needed) into common code so all arch's have access to it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Move determing if we have a ramdisk and where its located into the
common code. Keep track of the ramdisk start and end in the
bootm_headers_t image struct.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Move entry point code out of each arch and into common code.
Keep the entry point in the bootm_headers_t images struct.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
space such that 0xFA000000 in the processor's address space maps to 0
on the PCI I/O bus.

Signed-off-by Randy Vinson <rvinson@mvista.com>
Acked-by: Roy Zang <tie-fei.zang@freescale.com>

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>

Use the same mapping in flash as used by Linux

Signed-off-by: Wolfgang Denk <wd@denx.de>

Bug was introced by "Big white-space cleanup" (53677ef1)

Signed-off-by: Wolfgang Denk <wd@denx.de>

fix mvBL-M7 config and move to matrix_vision subdir

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

This patch adds elements to the 83xx sysconf structure and #define values that are used
by mpc83xx family devices.

Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
PCI card rather than a host computer.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

This adds a helper function to unlock the PCI configuration bit, so that
any extra PCI setup (such as outbound windows, etc.) can be done after
using the 83XX_GENERIC_PCI code to set up the PCI bus.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Change the MPC8349EMDS board to use the generic PCI initialization code
for the mpc83xx cpu.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
to combine both config options into one line. This even allows defining
both options and not generating the target object twice.

Signed-off-by: Stefan Roese <sr@denx.de>

Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.

Signed-off-by: Jens Gehrlein <sew_s@tqs.de>

 - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
   -- Timer Value Register @ TIMER Base + 4 is Read-only.
   -- Prescale Value (Bits 3-2 of TIMER Control register)
	can only be one of 00,01,10. 11 is undefined.
   -- CFG_HZ for Versatile board is set to
	#define CFG_HZ		(1000000 / 256)
	So Prescale bits is set to indicate
	- 8 Stages of Prescale, Clock divided by 256
 - The Timer Control Register has one Undefined/Shouldn't Use Bit
   So we should do read/modify/write Operation

Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>

Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>

ARM DaVinci: Removed redundant NAND initialization code.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

ARM DaVinci: Fix compilation error with new MTD code.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

Replace the "must quote special characters" note with a hint on
how to dereference /aliases pointers by omitting the leading "/".
This feature was introduced by Kumar Gala as a libfdt enhancement
in commit ed035708235332c3c117ee3bb1a426063f03cfcb.

Example:

=> fdt print /aliases
aliases {
        ethernet0 = "/qe@e0100000/ucc@2000";
        ethernet1 = "/qe@e0100000/ucc@3000";
        serial0 = "/soc8360@e0000000/serial@4500";
        serial1 = "/soc8360@e0000000/serial@4600";
        pci0 = "/pci@e0008500";
};
=> fdt print ethernet0
ucc@2000 {
        device_type = "network";
        compatible = "ucc_geth";
        cell-index = <0x1>;
        reg = <0x2000 0x200>;
        interrupts = <0x20>;
        interrupt-parent = <0x2>;
        local-mac-address = [00 00 00 00 00 00];
        rx-clock-name = "none";
        tx-clock-name = "clk9";
        phy-handle = <0x3>;
        phy-connection-type = "rgmii-id";
        pio-handle = <0x4>;
};

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>

If the path doesn't start with '/' check to see if it matches some alias
under "/aliases" and substitute the matching alias value in the path
and retry the lookup.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>

As well as fdt_subnode_offset(), libfdt includes an
fdt_subnode_offset_namelen() function that takes the subnode name to
look up not as a NUL-terminated string, but as a string with an
explicit length.  This can be useful when the caller has the name as
part of a longer string, such as a full path.

However, we don't have corresponding 'namelen' versions for
fdt_get_property() and fdt_getprop().  There are less obvious use
cases for these variants on property names, but there are
circumstances where they can be useful e.g. looking up property names
which need to be parsed from a longer string buffer such as user input
or a configuration file, or looking up an alias in a path with
IEEE1275 style aliases.

So, since it's very easy to implement such variants, this patch does
so.  The original NUL-terminated variants are, of course, implemented
in terms of the namelen versions.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>