This commit fixes two problems:

[1] We could not do board configuration and "make all"
    in one command line.

For example, the following did not work as we expect:
  $ make sandbox_config all
  Configuring for sandbox board...
  make: Nothing to be done for `all'.

[2] mixed-target build did not work with -j option

For example, the following did not work:
  $ make -j8 sandbox_config u-boot
  Makefile:481: *** "System not configured - see README".  Stop.
  make: *** [u-boot] Error 2
  make: *** Waiting for unfinished jobs....
  Configuring for sandbox board...

Going forward, we can do
  $ make -j8 sandbox_config all

This is the same as
  $ make sandbox_config
  $ make -j8

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit refactors cleaning targets such as
clean, clobber, mrpropper, distclean
with scripts/Makefile.clean.

By using scripts/Makefile.clean, we can recursively descend
into subdirectories and delete generated files there.

We do not need add a big list of generated files
to the "clean" target.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

- Move "easylogo", "gdb" tagets to tools/Makefile
 - Delete "gdbtools" target (same as "gdb")

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

$(MTD_VERSION) is used in tools/env/Makefile

If you specify a variable at a command line like:
  $ make MTD_VERSION=old env
or specify it thru an envrionment variable like:
  $ export MTD_VERSION=old
  $ make env
it is inherited to the sub-make too.
We do not need to pass it from the top Makefile explicitely.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit refactors rules of directory descending
and defines u-boot-dirs and u-boot-all-dirs.
(We will need u-boot-all-dirs when using
scripts/Makefile.clean)

Additionally, rename LIBS-y to libs-y.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit changes the top Makefile to handle various targets
nicely.
Make targets are divided into four categories:

 - mixed-targets
     We can call a configuration target and build targets
     at one command line like follows:
     $ make <board_name>_config u-boot

     They are handled one by one.

 - config targets
     <board_name>_config

 - no-dot-config-targets
     Targets we can run without board configuration such as
       clean, mrproper, distclean, TAGS, %docs, etc.

 - build targets
     The other target which need board configuration.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Before this commit, "make tidy" did
"make clean" + delete "*.depend*" files.

But, we do not have "*.depend*" files any more,
which means "make tidy" is the same as "make clean".

This commit removes the redandant target "tidy".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Before this commit, {spl,tpl}-autoconf.mk was always generated
at the top Makefile even if SPL(TPL) build was not selected.

This commit moves the build rule of {spl,tpl}-autoconf.mk
from the top Makefile to spl/Makefile.
It prevents unnecessary {spl,tpl}-autoconf.mk from being
generated.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit changes the location of include directives
of board configuration files.

The purpose of this change is:
 - Slim down $(TOPDIR)/config.mk
 - Prevent $(TOPDIR)/Makefile from including the same
    configuration file twice
 - Do not include include/config.mk multiple times
    because ARCH, CPU, BOARD, VENDOR, SOC are exported

Before this commit:

 - include/autoconf.mk was included from $(TOPDIR)/Makefile
   and $(TOPDIR)/config.mk
   (This means $(TOPDIR)/Makefile included include/autoconf.mk twice)

 - include/{spl,tpl}-autoconf.mk was included from $(TOPDIR)/config.mk

 - include/config.mk was included from $(TOPDIR)/Makefile
   and $(TOPDIR)/config.mk
   (This means $(TOPDIR)/Makefile included include/config.mk twice)

After this commit:

 - include/autoconf.mk is included from $(TOPDIR)/Makefile
   and $(TOPDIR)/scripts/Makefile.build

 - include/{spl,tpl}-autoconf.mk is included from $(TOPDIR)/spl/Makefile
   and $(TOPDIR)/scripts/Makefile.build

 - include/config.mk is included from $(TOPDIR)/config.mk and
   $(TOPDIR)/spl/Makefile

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

We can get Kbuild-ish log style like this:
  GEN     include/autoconf.mk
  GEN     include/autoconf.mk.dep

We do not need XECHO any more.

And also change checkstack target like Linux Kernel.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

We had switched to Kbuild.
We do not need old build scripts any more.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Now we are ready to switch over to real Kbuild.

This commit disables temporary scripts:
  scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
  scripts/{Makefile.build,Makefile.host,Makefile.lib}.

This switch is triggered by the line in scripts/Kbuild.include
  -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
  +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj

We need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.

Additionally, we need to fix compiler flags which are
locally added or removed.

In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>

This commit imports build scripts from Linux Kernel v3.13
as they are.

I know they include some trailing spaces
but I am intentionally keeping them untouched.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Some build scripts including scripts/Makefile.build
will be imported from Linux Kernel in the next commit.
We need to adjust them for U-Boot in the following commits.

To make it easier for reviewers to track the modification,
this commit renames scripts/Makefile.build to
scripts/Makefile.build.tmp beforehand.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

We are going to switch over to Kbuild in upcoming commits.

Each makefile must have non-empty obj- or obj-y
to generate built-in.o on Kbuild.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit changes the working directory
where the build process occurs.

Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.

That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
  $(obj)u-boot.bin:  $(obj)u-boot

Here, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.

And our old build system changes the current working directory
with "make -C <sub-dir>" syntax when descending into the
sub-directories.

On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.

The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.

Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>"
syntax for descending into sub-directories.
(We can write it like "make $(obj)=<sub-dir>" with a shorthand.)
This means the current working directory is always the top
of the output directory.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>

This commit moves some flags which are used
under examples/ directory only.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Some flags are used for SPL (and TPL) build only.
This commit moves them from config.mk to spl/Makefile.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit merges commonly-used header include paths
to UBOOTINCLUDE and NOSTDINC_FLAGS variables, which are placed
at the top Makefile.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Before this commit, most of compiler flags were defined in config.mk.
But it is redundant because config.mk is included from all recursive make.

This commit moves many complier flags to the top Makefile
and export them.
And we use new vaiarables to store them:
KBUILD_CPPFLAGS, KBUILD_CFLAGS, KBUILD_AFLAGS.
This will allow us to switch more smoothly to Kbuild.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit adjusts some files to use Kbuild.include.

 - Use cc-option defined in Kbuild.include
    (Delete cc-option in config.mk)
 - Use cc-version defined in
    (Delete cc-version in config.mk)
 - Move binutils-version and dtc-version to Kbuild.include
     by analogy to cc-version

This commit also adds srctree (same as SRCTREE)
to use Kbuild scripts.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

BFD_ROOT_DIR is used only in tools/gdb/Makefile

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit moves some variable definitions from config.mk
to the top Makefile:

  - HOSTCC, HOSTCFLAGS, HOSTLDFLAGS
  - AS, LD, CC, CPP, etc.
  - SHELL (renamed to CONFIG_SHELL)

I'd like to slim down config.mk file
because it is included from all recursive make.
It is redundant to re-define the variables
every time descending into sub directories.
We should rather define them at the top Makefile
and export them.

U-Boot makefiles has been used "SHELL" variable to store shell
chosen for the user, whereas Linux Kernel uses "CONFIG_SHELL".

We should never use "SHELL" variable because it is
a special variable for GNU Make.
Changing SHELL may cause unpredictable side effects
whose root cause is usually difficult to find.
We should use a generic variable name "CONFIG_SHELL".

We should not use the syntax as follows either:

    rm -f $(obj)tools/env/{fw_printenv,fw_setenv}

This depends on "bash" although GNU Make generally
invokes "sh" to run the each rule.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit moves suffix rules from config.mk
to scripts/Makefile.build, which will allow us
to switch smoothly to real Kbuild.

Note1:
post/lib_powerpc/fpu/Makefile has
its own rule to compile C sources.
We need to tweak it to keep the same behavior.

Note2:
There are two file2 with the same name:
arch/arm/lib/crt0.S and eamples/api/crt0.S.
To keep the same build behavior,
examples/api/Makefile also has to be treaked.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Some Samsung boards have their own tools under board/samsung/<board>/tools/.
This commit refactor more makefiles with "hostprogs-y".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Before this commit, makefiles under tools/ directory
were implemented with their own way.

This commit refactors them by using "hostprogs-y" variable.

Several C sources have been added to wrap other C sources
to simplify Makefile.
For example, tools/crc32.c includes lib/crc32.c

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

This commit adds scripts/Makefile.host.tmp which will
be used in the next commit to convert makefiles
under tools/ directory to Kbuild style.

Notice this script, scripts/Makefile.host.tmp
is temporary.

When switching over to real Kbuild,
it will be replaced with scripts/Makefile.host of Linux Kernel.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Ignore generated files by Kbuild such as .*.cmd, *.order, etc.

Besides above,
 - Ignore *.s files
   We do not need to ignore with file name, asm-offsets.s
 - Do not ignore *.rej (for quilt)
 - Ignore backup files, \#*#

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

Commit 779bf42c moved timer functions from
arch/microblaze/lib/time.c to arch/microblaze/cpu/timer.c.

But the empty file, arch/microblaze/lib/time.c
has been remaining probably for a human mistake.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Michal Simek <michal.simek@xilinx.com>

Add the SATA boot support for OMAP5 and dra7xx.

Renamed the omap_sata_init to the common init_sata(int dev)
for commonality in with sata stack.

Added the ROM boot device ID for SATA.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>

Add spl_sata to read a fat partition from a bootable SATA
drive.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>

The incorrect substitution made it rebuild every time.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>

Unlike other commands (for example, "fatwrite"), ext4write would
interpret the "sizebytes" as decimal number.  This is not only
inconsistend and unexpected to most users, it also breaks usage
like this:

	tftp ${addr} ${name}
	ext4write mmc 0:2 ${addr} ${filename} ${filesize}

Change this to use the standard notation of base 16 input format.
See also commit b770e88a

WARNING: this is a change to the user interface!!

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Uma Shankar <uma.shankar@samsung.com>
Cc: Stephen Warren <swarren@nvidia.com>

commit 626ee1e3 "phylib: update atheros ar803x phy"

leads in failing ethernet on the pxm2 board.

Calling genphy_config() instead of ar8021_config(),
which seems for ar8021 phys not ar803x phys, make
it working again.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>