Signed-off-by: Asen Dimov <dimov@ronetix.at>

Signed-off-by: Asen Dimov <dimov@ronetix.at>

Make code build with older tool chains.

Signed-off-by: Wolfgang Denk <wd@denx.de>

DECLARE_GLOBAL_DATA_PTR declarations in functions are inherently
troublesome with various compilers (e.g. gcc 4.5)

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss
values in the OMAP timer driver.

The usage of bss values in drivers before initialisation of bss is forbidden.
In that special case some data in .rel.dyn gets corrupted.

Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Tested-by: Steve Sakoman <steve.sakoman@linaro.org>
Tested-by: John Rigby <john.rigby@linaro.org>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

The DM6446 does not build due to the ARM
relocation patch.

Also the board does not build in the NOR
mode. Changed default to NAND to ensure
no build failure.
While at it removed CONFIG_CMD_KGDB

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

This change allows the davinci timer functions to be used before
relocation since it avoids using static variables prior to BSS being
made available.

The code is based on that used in the at91 timers, modified to use
a davinci specific hardware timer. It also maintains reset_timer()
to allow deprecated timer usage to continue to work (for example,
in nand_base.c)

Signed-off-by: Nick Thompson <nick.thompson@ge.com>
Tested-by: Ben Gardiner <bengardiner@nanometrics.ca>
Tested-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Tested-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

This file has been synced (copy) from Linux source code.
This commit was based on kernel 2.6.32.
It updates gigabit related phy registers and basic definitions.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

All code that attemots to access variables in BSS before relocation
(for example directly or indirectly by board_init_f()) needs to be
fixed. Especially timer.c needs to fix on most of the ARM platforms.

This patch makes timer related variables in gd_t available for
all ARM implementations.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

Edited commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>

I doubt the stack_setup() was defective before:
 we load the current location of _start and compare against destination
 of relocate_code(). If we are already there we shoud skip the
 relocation and jump over to clear_bss. Before the clear_bss was also skipped.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

r8 is used for global_data and should therefore be left alone!

For C code the compiler flag --fixed-r8 does the job, but in assembler
we need to be aware of that fact.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

In case we are still at relocation target address before relocation we
do not need to load the registers needed for relocation. We should
instead skip the whole relocation part and jump over to clear_bss
immediately.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

This patch uses r1 as scratch register for copy_loop(). Therefore we do
not longer need r7 for the storage of relocate_code()'s 'addr_moni' (the
destination address of relocation).
Therefore r7 can be used later on for other purposes.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

The handling of env_hwconfig, board_hwconfig, and cpu_hwconfig got
broken when we removed the boards defining dummy board_hwconfig
& cpu_hwconfig values.

We fix this by handling the various strings in priority order.  If
hwconfig_parse returns NULL for a given string we check the next one
in order (env_hwconfig, board_hwconfig, followed by cpu_hwconfig).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

suggested from Daniel Hobi<daniel.hobi@schmid-telecom.ch>

Tested on following boards:
arm1136: qong
armv7: omap3_beagle
arm926ejs: magnesium, tx25

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
cc: Albert ARIBAUD <albert.aribaud@free.fr>

Fix ca9x4_ct_vxp build error

Configuring for ca9x4_ct_vxp board...
board/armltd/vexpress/libvexpress.o: In function `udelay':
u-boot.git/board/armltd/vexpress/ca9x4_ct_vxp.c:161: multiple
definition of `udelay'
lib/libgeneric.o:u-boot.git/lib/time.c:34: first defined here

lib/libgeneric.o: In function `udelay':

zlib.c:(.text+0x1ee8): undefined reference to `__udelay'

Signed-of-by: Dirk Behme <dirk.behme@googlemail.com>

Fixed "pointer from integer without a cast" warnings in Vexpress.

Signed-off-by: Matt Waddel <matt.waddel@linaro.org>

This patch fixes build errors in the vexpress system:
  - Removed sys_proto.h requirement from syslib.c.
  - Switched vexpress to the default armv7 linker script.
  - Renamed TEXT_BASE to CONFIG_SYS_TEXT_BASE.

Signed-off-by: Matt Waddel <matt.waddel@linaro.org>

Seems original implementation forget to set the pointer to point
to the oobbuf, so when we want to see oob buf, we see nothing...
Fix it by get pointer as the oobbuf set.

Signed-off-by: Lei Wen <leiwen@marvell.com>

Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc
bss values in arm920t/at91/timer driver.
The usage of bss values in driver before initialisation of bss is
forbidden. In that special case some data in .rel.dyn gets corrupted by
the arm920t/at91/timer driver.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

* add boards_by_soc()
 * remove boards already in boards.cfg from LIST_AT91

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

This patch also removes now unnecessary config.mk in board directory and
make usage of new features in boards.cfg.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

Adds support for the EMK TOP9000 CPU Module which is
based on ATMELs ARM926EJS AT91SAM9XE SoC.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

The AT91SAM9G20 BOOT ROM apparently initializes PA23 and PA24 to multi drive
(open drain). Revert this, if those pins are going to be used for MII.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

This patch http://patchwork.ozlabs.org/patch/72962/

 included a boards.cfg
change, but it was omitted when applied as
f1c574d4

This fixes the NAND SPL build on MPC8315ERDB.

Signed-off-by: Scott Wood <scottwood@freescale.com>

The attached patch fixes wrong timing default values and adds the
possibility to specify board specific timing value in the board config file.

Signed-off-by: David Mueller <d.mueller@elsoft.ch>

The nand-read function returns an error code if correctable errors have occurred.
This is not desirable, since the errors have been corrected!

This patch switches to the nand_read_skip_bad function which does not
return an error code if the errors are correctable.

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Acked-by: Scott Wood <scottwood@freescale.com>

The link_name variable is declared inside the if block and it is used
outside it through the name pointer.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

Automatically unmount UBIFS partition when user changes the UBI device.
Otherwise the following UBIFS commands will crash.

Signed-off-by: Stefan Roese <sr@denx.de>

Until now ubifsload pads the destination with 0 up to a multiple of
UBIFS_BLOCK_SIZE (4KiB) while reading a file to memory. This patch
changes this behaviour to only read to the requested length. This
is either the file length or the length/size provided as parameter
to the ubifsload command.

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Stefan Roese <sr@denx.de>

This new ubifsumount command allows the user to unmount a previously
mounted UBIFS volume.

Signed-off-by: Stefan Roese <sr@denx.de>

CONFIG_FSL_DIU_LOGO_BMP has been removed while refactoring
MPC8610 and MPC5121 DIU code, so remove it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>