Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

We need to wait while drawing engine clears frame
buffer before any further software accesses to frame
buffer will be initiated. Otherwise software drawn
parts could be partially destroyed by the drawing
engine or even GDC chip freeze could occur (as
observed on socrates board).

Signed-off-by: Anatolij Gustschin <agust@denx.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>

Clean Makefile
Move device specific values to driver for better reading

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>

Microblaze and PowerPC use boot_get_ramdisk for loading
ramdisk to memory with checking return value.
Return 0 means success. Return 1 means failed.
Here is correspond part of code from bootm.c which check
return code.

ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
		&rd_data_start, &rd_data_end);
if (ret)
	goto error;

Signed-off-by: Michal Simek <monstr@monstr.eu>

Signed-off-by: Michal Simek <monstr@monstr.eu>

Redesign uartlite driver to in_be32 and out_be32 macros
Fix missing header in io.h

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>

which happened when rounding the serial port clock divisor

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

caused by missing dcache status/enable/disable functions.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

This patch removes some ft_board_setup() functions from some 4xx boards.
This can be done since we now have a default weak implementation for this
in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
implementation like canyonlands need their own version.

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Mail to kharris@nexus-tech.net bounces because the user doesn't exist
anymore. You can't be a maintainer without a valid e-mail address, so
move all boards that used to be maintained by Kyle Harris to the
"orphaned" list.

Currently, only PowerPC has a list of orphaned boards, so this patch
creates one for ARM as well.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

On the at91sam9260ep development board there is an EEPROM
connected to the TWI interface (PA23, PA24 Peripheral A
multiplexing), so we cannot use these pins as ETX2, ETX3.
This patch configures PA10, PA11 pins for ETX2, ETX3
instead of PA23, PA24 pins.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>

The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
so it was not possible to set a slow pixel clock and thus prevented
display on small screens.

Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
Acked-by: John Rigby <jrigby@freescale.com>

board/ads5121/iopin.c
    Replace bit fields in struct iopin_t with a single
    field and intialize it via plain old macros.
    This fixes the type pun warnings and makes the code
    more readable.

board/ads5121/ads5121.c
    Add include iopin.h to ads5121.c for the iopin_initialize
    prototype.

    Add an extern void ads5121_diu_init(void)

Signed-off-by: John Rigby <jrigby@freescale.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Signed-off-by: Wolfgang Denk <wd@denx.de>

Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
CFG_CSn_RO is defined as 0, the chipselect will not
be assigned.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
clock module in cpu/<cf arch>/cpu_init.c

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Rename int mii_init(void) to void mii_init(void)

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

The compiling error was caused by missing a closed parentheses
in speed.c

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

The timer was assigned to wrong timer memory mapped which
caused udelay() and timer() not working properly.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Signed-off-by: Kurt Mahan <kmahan@freescale.com>

Signed-off-by: Kurt Mahan <kmahan@freescale.com>

Signed-off-by: Kurt Mahan <kmahan@freescale.com>