Convert CONFIG_SCSI to Kconfig

This converts the following to Kconfig:
   CONFIG_SCSI

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

README

@@ -826,7 +826,6 @@ The following options need to be configured:
 		CONFIG_CMD_RUN		  run command in env variable
 		CONFIG_CMD_SANDBOX	* sb command to access sandbox features
 		CONFIG_CMD_SAVES	* save S record dump
-		CONFIG_SCSI		* SCSI Support
 		CONFIG_CMD_SDRAM	* print SDRAM configuration information
 					  (requires CONFIG_CMD_I2C)
 		CONFIG_CMD_SF		* Read/write/erase SPI NOR flash

arch/Kconfig

@@ -75,6 +75,7 @@ config SANDBOX
 	imply FAT_WRITE
 	imply HASH_VERIFY
 	imply LZMA
+	imply SCSI
 
 config SH
 	bool "SuperH architecture"

arch/arm/Kconfig

@@ -792,6 +792,7 @@ config TARGET_LS2080AQDS
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	select ARCH_MISC_INIT
+	imply SCSI
 	help
 	  Support for Freescale LS2080AQDS platform
 	  The LS2080A Development System (QDS) is a high-performance
@@ -806,6 +807,7 @@ config TARGET_LS2080ARDB
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	select ARCH_MISC_INIT
+	imply SCSI
 	help
 	  Support for Freescale LS2080ARDB platform.
 	  The LS2080A Reference design board (RDB) is a high-performance
@@ -866,6 +868,7 @@ config TARGET_LS1012ARDB
 	select ARCH_LS1012A
 	select ARM64
 	select BOARD_LATE_INIT
+	imply SCSI
 	help
 	  Support for Freescale LS1012ARDB platform.
 	  The LS1012A Reference design board (RDB) is a high-performance
@@ -894,6 +897,7 @@ config TARGET_LS1021AQDS
 	select LS1_DEEP_SLEEP
 	select SYS_FSL_DDR
 	select BOARD_EARLY_INIT_F
+	imply SCSI
 
 config TARGET_LS1021ATWR
 	bool "Support ls1021atwr"
@@ -906,6 +910,7 @@ config TARGET_LS1021ATWR
 	select ARCH_SUPPORT_PSCI
 	select LS1_DEEP_SLEEP
 	select BOARD_EARLY_INIT_F
+	imply SCSI
 
 config TARGET_LS1021AIOT
 	bool "Support ls1021aiot"
@@ -916,6 +921,7 @@ config TARGET_LS1021AIOT
 	select SUPPORT_SPL
 	select ARCH_LS1021A
 	select ARCH_SUPPORT_PSCI
+	imply SCSI
 	help
 	  Support for Freescale LS1021AIOT platform.
 	  The LS1021A Freescale board (IOT) is a high-performance
@@ -930,6 +936,7 @@ config TARGET_LS1043AQDS
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	imply SCSI
 	help
 	  Support for Freescale LS1043AQDS platform.
 
@@ -941,6 +948,7 @@ config TARGET_LS1043ARDB
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
+	imply SCSI
 	help
 	  Support for Freescale LS1043ARDB platform.
 
@@ -953,6 +961,7 @@ config TARGET_LS1046AQDS
 	select SUPPORT_SPL
 	select DM_SPI_FLASH if DM_SPI
 	select BOARD_EARLY_INIT_F
+	imply SCSI
 	help
 	  Support for Freescale LS1046AQDS platform.
 	  The LS1046A Development System (QDS) is a high-performance
@@ -969,6 +978,7 @@ config TARGET_LS1046ARDB
 	select DM_SPI_FLASH if DM_SPI
 	select POWER_MC34VR500
 	select BOARD_EARLY_INIT_F
+	imply SCSI
 	help
 	  Support for Freescale LS1046ARDB platform.
 	  The LS1046A Reference Design Board (RDB) is a high-performance

arch/arm/cpu/armv7/ls102xa/Kconfig

@@ -14,6 +14,7 @@ config ARCH_LS1021A
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_SEC_COMPAT_5
 	select SYS_FSL_SEC_LE
+	imply SCSI
 
 menu "LS102xA architecture"
 	depends on ARCH_LS1021A

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -26,6 +26,7 @@ config ARCH_LS1043A
 	select SYS_FSL_HAS_DDR4
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
+	imply SCSI
 
 config ARCH_LS1046A
 	bool
@@ -46,6 +47,7 @@ config ARCH_LS1046A
 	select SYS_FSL_SRDS_2
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
+	imply SCSI
 
 config ARCH_LS2080A
 	bool

arch/arm/include/asm/arch-ls102xa/config.h

@@ -81,7 +81,6 @@
 
 /* SATA */
 #define AHCI_BASE_ADDR				(CONFIG_SYS_IMMR + 0x02200000)
-#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT

arch/arm/mach-mvebu/Kconfig

@@ -77,6 +77,7 @@ config TARGET_CLEARFOG
 config TARGET_MVEBU_ARMADA_37XX
 	bool "Support Armada 37xx platforms"
 	select ARMADA_3700
+	imply SCSI
 
 config TARGET_DB_88F6720
 	bool "Support DB-88F6720 Armada 375"
@@ -94,6 +95,7 @@ config TARGET_MVEBU_ARMADA_8K
 	bool "Support Armada 7k/8k platforms"
 	select ARMADA_8K
 	select BOARD_LATE_INIT
+	imply SCSI
 
 config TARGET_DB_MV784MP_GP
 	bool "Support db-mv784mp-gp"

arch/arm/mach-omap2/omap5/Kconfig

@@ -25,12 +25,14 @@ config TARGET_DRA7XX_EVM
 	select DRA7XX
 	select TI_I2C_BOARD_DETECT
 	select PHYS_64BIT
+	imply SCSI
 
 config TARGET_AM57XX_EVM
 	bool "AM57XX"
 	select BOARD_LATE_INIT
 	select DRA7XX
 	select TI_I2C_BOARD_DETECT
+	imply SCSI
 
 endchoice
 

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -117,6 +117,7 @@ config TARGET_MPC8572DS
 	select ARCH_MPC8572
 # Use DDR3 controller with DDR2 DIMMs on this board
 	select SYS_FSL_DDRC_GEN3
+	imply SCSI
 
 config TARGET_P1010RDB_PA
 	bool "Support P1010RDB_PA"

arch/powerpc/cpu/mpc86xx/Kconfig

@@ -21,6 +21,7 @@ config TARGET_MPC8610HPCD
 config TARGET_MPC8641HPCN
 	bool "Support MPC8641HPCN"
 	select ARCH_MPC8641
+	imply SCSI
 
 config TARGET_XPEDITE517X
 	bool "Support xpedite517x"

board/congatec/Kconfig

@@ -13,6 +13,7 @@ choice
 config TARGET_CONGA_QEVAL20_QA3_E3845
 	bool "congatec QEVAL 2.0 & conga-QA3/E3845"
 	select BOARD_LATE_INIT
+	imply SCSI
 	help
 	  This is the congatec Qseven 2.0 evaluation carrier board
 	  (conga-QEVAL) equipped with the conga-QA3/E3845-4G SoM.

board/dfi/Kconfig

@@ -12,6 +12,7 @@ choice
 
 config TARGET_DFI_BT700
 	bool "DFI BT700 BayTrail"
+	imply SCSI
 	help
 	  This is the DFI Q7X-151 baseboard equipped with the
 	  DFI BayTrail Bt700 SoM. It contains an Atom E3845 with

configs/A10-OLinuXino-Lime_defconfig

@@ -18,6 +18,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800

configs/A20-OLinuXino-Lime2_defconfig

@@ -20,6 +20,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
+CONFIG_SCSI=y
 CONFIG_DFU_RAM=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y

configs/A20-OLinuXino-Lime_defconfig

@@ -16,6 +16,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO3_VOLT=2800

configs/A20-OLinuXino_MICRO_defconfig

@@ -19,6 +19,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO3_VOLT=2800

configs/A20-Olimex-SOM-EVB_defconfig

@@ -20,6 +20,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SCSI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
 CONFIG_SUN7I_GMAC=y

configs/Bananapi_M2_Ultra_defconfig

@@ -14,5 +14,6 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+CONFIG_SCSI=y
 CONFIG_AXP_DLDO4_VOLT=2500
 CONFIG_AXP_ELDO3_VOLT=1200

configs/Bananapi_defconfig

@@ -17,6 +17,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_NETCONSOLE=y
+CONFIG_SCSI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
 CONFIG_SUN7I_GMAC=y

configs/Bananapro_defconfig

@@ -19,6 +19,7 @@ CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_SPL_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_NETCONSOLE=y
+CONFIG_SCSI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
 CONFIG_SUN7I_GMAC=y