ls: initial addition, Boundary Devices board

ls.h: CONFIG_IPUV3_CLK 264000000
ls: use nitrogen6x/ddr-setup.cfg
ls: add CONFIG_CMD_GPIO
ls: explicit fbp_detect_i2c
ls: add wlmac
ls: use boundary.h
ls: add CONFIG_SPI_FLASH_SPANSION
ls: ls_defconfig add CONFIG_BLOCK_CACHE
ls: use common code for eth init
ls: eth.c now in common directory
ls: move misc_init_r/do_kbd to common
ls: move max77823_init to common
ls: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common
ls: use common 1066mhz_4x256mx16.cfg
ls: add  CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs
ls: use common ddr script
ls: port to v2018.07

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

ls: update to v2017.01
ls: update to v2017.03

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>

arch/arm/mach-imx/mx6/Kconfig

@@ -422,6 +422,9 @@ config TARGET_IOC
 config TARGET_JLM
 	bool "jlm"
 
+config TARGET_LS
+	bool "ls"
+
 config TARGET_NITROGEN6X
 	bool "nitrogen6x"
 	imply USB_HOST_ETHER
@@ -585,6 +588,7 @@ source "board/boundary/hp/Kconfig"
 source "board/boundary/insp/Kconfig"
 source "board/boundary/ioc/Kconfig"
 source "board/boundary/jlm/Kconfig"
+source "board/boundary/ls/Kconfig"
 source "board/boundary/nitrogen6x/Kconfig"
 source "board/boundary/ys/Kconfig"
 source "board/bticino/mamoj/Kconfig"

board/boundary/ls/Kconfig

+if TARGET_LS
+
+config SYS_CPU
+	default "armv7"
+
+config SYS_BOARD
+	default "ls"
+
+config SYS_VENDOR
+	default "boundary"
+
+config SYS_SOC
+	default "mx6"
+
+config SYS_CONFIG_NAME
+	default "ls"
+
+config ENV_WLMAC
+	bool
+	default	y
+
+source "board/boundary/common/Kconfig"
+
+endif

board/boundary/ls/MAINTAINERS

+LS BOARD
+M:	Troy Kisky <troy.kisky@boundarydevices.com>
+S:	Maintained
+F:	board/boundary/ls/
+F:	include/configs/ls.h
+F:	configs/ls_defconfig

board/boundary/ls/Makefile

+#
+# Copyright (C) 2014, Boundary Devices <info@boundarydevices.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+obj-y  := ls.o

board/boundary/ls/ls2g.cfg

+/*
+ * Copyright (C) 2014 Boundary Devices
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM      spi
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+/* turn on main power */
+DATA 4, 0x020e03b4, 0xf0b0
+DATA 4, 0x020e00a0, 5
+
+/* NC YET */
+#define MX6_MMDC_P0_MPDGCTRL0_VAL	0x42740304
+#define MX6_MMDC_P0_MPDGCTRL1_VAL	0x026e0265
+#define MX6_MMDC_P1_MPDGCTRL0_VAL	0x02750306
+#define MX6_MMDC_P1_MPDGCTRL1_VAL	0x02720244
+#define MX6_MMDC_P0_MPRDDLCTL_VAL	0x463d4041
+#define MX6_MMDC_P1_MPRDDLCTL_VAL	0x42413c47
+#define MX6_MMDC_P0_MPWRDLCTL_VAL	0x37414441
+#define MX6_MMDC_P1_MPWRDLCTL_VAL	0x4633473b
+#define MX6_MMDC_P0_MPWLDECTRL0_VAL	0x0025001f
+#define MX6_MMDC_P0_MPWLDECTRL1_VAL	0x00290027
+#define MX6_MMDC_P1_MPWLDECTRL0_VAL	0x001f002b
+#define MX6_MMDC_P1_MPWLDECTRL1_VAL	0x000f0029
+#define WALAT	1
+
+#include "../common/mx6/ddr-setup.cfg"
+#define RANK 0
+#define BUS_WIDTH 64
+/* D2516EC4BXGGB-U */
+#include "../common/mx6/1066mhz_256mx16.cfg"
+#include "../common/mx6/clocks.cfg"

configs/ls_defconfig

+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_TARGET_LS=y
+CONFIG_FEC_MAC_FUSE=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/ls/ls2g.cfg,MX6Q,DDR_MB=2048,DEFCONFIG=\"ls\""
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x12000000
+CONFIG_FASTBOOT_BUF_SIZE=0x26000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_NETDEVICES=y
+CONFIG_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Boundary"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y

include/configs/ls.h

+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Boundary Devices LS board
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "mx6_common.h"
+
+#define CONFIG_MACH_TYPE	3778
+
+#define CONFIG_ETHPRIME	"usbnet"
+
+#define CONFIG_IMX_HDMI
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define BD_I2C_MASK	7
+#define BD_MMC_UMS_DISKS "1 0"
+
+#include "boundary.h"
+#define CONFIG_EXTRA_ENV_SETTINGS BD_BOUNDARY_ENV_SETTINGS \
+
+#endif	       /* __CONFIG_H */