davinci: da850-evm: switch to using TI_COMMON_CMD_OPTIONS

Like the OMAP-L138 LCDK before it, let's move the da850-evm and
the variations to TI_COMMON_CMD_OPTIONS to cut back one some of the
defconfig entries.

Signed-off-by: Adam Ford <aford173@gmail.com>

board/davinci/da8xxevm/Kconfig

@@ -22,6 +22,6 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "omapl138_lcdk"
 
-source "board/ti/common/Kconfig"
-
 endif
+
+source "board/ti/common/Kconfig"

configs/da850_am18xxevm_defconfig

 CONFIG_ARM=y
 CONFIG_ARCH_DAVINCI=y
 CONFIG_TARGET_DA850EVM=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -17,23 +18,24 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BOOTZ is not set
 # CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
+# CONFIG_CMD_EEPROM is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
+# CONFIG_CMD_GPIO is not set
+# CONFIG_CMD_GPT is not set
+# CONFIG_CMD_I2C is not set
+# CONFIG_CMD_PART is not set
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
+# CONFIG_CMD_TIME is not set
+# CONFIG_CMD_EXT4 is not set
+# CONFIG_CMD_FS_GENERIC is not set
 CONFIG_CMD_DIAG=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SYS_NS16550=y
+# CONFIG_FAT_WRITE is not set
 CONFIG_OF_LIBFDT=y

configs/da850evm_defconfig

 CONFIG_ARM=y
 CONFIG_ARCH_DAVINCI=y
 CONFIG_TARGET_DA850EVM=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -18,24 +19,23 @@ CONFIG_SPL=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot > "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
+# CONFIG_CMD_EEPROM is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
+# CONFIG_CMD_GPIO is not set
+# CONFIG_CMD_GPT is not set
+# CONFIG_CMD_I2C is not set
+# CONFIG_CMD_PART is not set
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
+# CONFIG_CMD_TIME is not set
+# CONFIG_CMD_EXT4 is not set
+# CONFIG_CMD_FS_GENERIC is not set
 CONFIG_CMD_DIAG=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SYS_NS16550=y
+# CONFIG_FAT_WRITE is not set
 CONFIG_OF_LIBFDT=y

configs/da850evm_direct_nor_defconfig

 CONFIG_ARM=y
 CONFIG_ARCH_DAVINCI=y
 CONFIG_TARGET_DA850EVM=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH,USE_NOR,DIRECT_NOR_BOOT"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -11,13 +12,21 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot > "
-CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_BOOTZ is not set
 CONFIG_CRC32_VERIFY=y
-CONFIG_CMD_SF=y
+# CONFIG_CMD_EEPROM is not set
+# CONFIG_CMD_GPIO is not set
+# CONFIG_CMD_GPT is not set
+# CONFIG_CMD_I2C is not set
+# CONFIG_CMD_MMC is not set
+# CONFIG_CMD_PART is not set
+# CONFIG_CMD_SPI is not set
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
+# CONFIG_CMD_TIME is not set
+# CONFIG_CMD_EXT2 is not set
+# CONFIG_CMD_EXT4 is not set
+# CONFIG_CMD_FAT is not set
+# CONFIG_CMD_FS_GENERIC is not set
 CONFIG_CMD_DIAG=y
 CONFIG_ENV_IS_IN_FLASH=y
 # CONFIG_MMC is not set