kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig

This option specifies the default Device Tree used for the run-time
configuration of U-Boot.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Michal Simek <michal.simek@xilinx.com>

include/configs/smdk5250.h

@@ -11,8 +11,6 @@
 
 #include <configs/exynos5250-dt.h>
 
-#undef CONFIG_DEFAULT_DEVICE_TREE
-#define CONFIG_DEFAULT_DEVICE_TREE	exynos5250-smdk5250
 
 /* Enable FIT support and comparison */
 #define CONFIG_FIT

include/configs/smdk5420.h

@@ -15,8 +15,6 @@
 
 #define CONFIG_SMDK5420			/* which is in a SMDK5420 */
 
-#undef CONFIG_DEFAULT_DEVICE_TREE
-#define CONFIG_DEFAULT_DEVICE_TREE	exynos5420-smdk5420
 
 /* select serial console configuration */
 #define CONFIG_SERIAL3		/* use SERIAL 3 */

include/configs/snow.h

@@ -11,8 +11,6 @@
 
 #include <configs/exynos5250-dt.h>
 
-#undef CONFIG_DEFAULT_DEVICE_TREE
-#define CONFIG_DEFAULT_DEVICE_TREE	exynos5250-snow
 
 /* Enable FIT support and comparison */
 #define CONFIG_FIT

include/configs/tec-ng.h

@@ -10,9 +10,6 @@
 
 #include "tegra30-common.h"
 
-/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE	tegra30-tec-ng
-
 /* High-level configuration options */
 #define V_PROMPT			"Tegra30 (TEC-NG) # "
 #define CONFIG_TEGRA_BOARD_STRING	"Avionic Design Tamonten™ NG Evaluation Carrier"

include/configs/tec.h

@@ -12,9 +12,6 @@
 
 #include "tegra20-common.h"
 
-/* Enable fdt support for TEC. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE	tegra20-tec
-
 /* High-level configuration options */
 #define V_PROMPT			"Tegra20 (TEC) # "
 #define CONFIG_TEGRA_BOARD_STRING	"Avionic Design Tamonten Evaluation Carrier"

include/configs/trats.h

@@ -16,8 +16,6 @@
 
 #define CONFIG_TRATS
 
-#undef CONFIG_DEFAULT_DEVICE_TREE
-#define CONFIG_DEFAULT_DEVICE_TREE	exynos4210-trats
 
 #define CONFIG_TIZEN			/* TIZEN lib */
 

include/configs/trats2.h

@@ -15,8 +15,6 @@
 
 #define CONFIG_SYS_PROMPT	"Trats2 # "	/* Monitor Command Prompt */
 
-#undef CONFIG_DEFAULT_DEVICE_TREE
-#define CONFIG_DEFAULT_DEVICE_TREE	exynos4412-trats2
 
 #define CONFIG_TIZEN			/* TIZEN lib */
 

include/configs/trimslice.h

@@ -11,9 +11,6 @@
 #include <linux/sizes.h>
 #include "tegra20-common.h"
 
-/* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE	tegra20-trimslice
-
 /* High-level configuration options */
 #define V_PROMPT		"Tegra20 (TrimSlice) # "
 #define CONFIG_TEGRA_BOARD_STRING	"Compulab Trimslice"

include/configs/venice2.h

@@ -12,9 +12,6 @@
 
 #include "tegra124-common.h"
 
-/* Enable fdt support for Venice2. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE	tegra124-venice2
-
 /* High-level configuration options */
 #define V_PROMPT			"Tegra124 (Venice2) # "
 #define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Venice2"

include/configs/ventana.h

@@ -11,9 +11,6 @@
 #include <linux/sizes.h>
 #include "tegra20-common.h"
 
-/* Enable fdt support for Ventana. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE	tegra20-ventana
-
 /* High-level configuration options */
 #define V_PROMPT		"Tegra20 (Ventana) # "
 #define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Ventana"

include/configs/vexpress_aemv8a.h

@@ -51,7 +51,6 @@
 /* Flat Device Tree Definitions */
 #define CONFIG_OF_LIBFDT
 
-#define CONFIG_DEFAULT_DEVICE_TREE	vexpress64
 
 /* SMP Spin Table Definitions */
 #ifdef CONFIG_BASE_FVP

include/configs/whistler.h

@@ -11,9 +11,6 @@
 #include <linux/sizes.h>
 #include "tegra20-common.h"
 
-/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE	tegra20-whistler
-
 /* High-level configuration options */
 #define V_PROMPT		"Tegra20 (Whistler) # "
 #define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Whistler"

include/configs/zynq_microzed.h

@@ -19,7 +19,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_ZYNQ_SDHCI0
-#define CONFIG_DEFAULT_DEVICE_TREE	zynq-microzed
 
 #include <configs/zynq-common.h>
 

include/configs/zynq_zc70x.h

@@ -23,7 +23,6 @@
 #define CONFIG_ZYNQ_I2C0
 #define CONFIG_ZYNQ_EEPROM
 #define CONFIG_ZYNQ_BOOT_FREEBSD
-#define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc702
 
 #include <configs/zynq-common.h>
 

include/configs/zynq_zc770.h

@@ -20,18 +20,15 @@
 # define CONFIG_ZYNQ_GEM_PHY_ADDR0	7
 # define CONFIG_ZYNQ_SDHCI0
 # define CONFIG_ZYNQ_SPI
-# define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc770-xm010
 
 #elif defined(CONFIG_ZC770_XM012)
 # define CONFIG_ZYNQ_SERIAL_UART1
 # undef CONFIG_SYS_NO_FLASH
-# define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc770-xm012
 
 #elif defined(CONFIG_ZC770_XM013)
 # define CONFIG_ZYNQ_SERIAL_UART0
 # define CONFIG_ZYNQ_GEM1
 # define CONFIG_ZYNQ_GEM_PHY_ADDR1	7
-# define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc770-xm013
 
 #else
 # define CONFIG_ZYNQ_SERIAL_UART0

include/configs/zynq_zed.h

@@ -21,7 +21,6 @@
 #define CONFIG_ZYNQ_USB
 #define CONFIG_ZYNQ_SDHCI0
 #define CONFIG_ZYNQ_BOOT_FREEBSD
-#define CONFIG_DEFAULT_DEVICE_TREE	zynq-zed
 
 #include <configs/zynq-common.h>