Merge branch 'master' of git://www.denx.de/git/u-boot-coldfire

CREDITS

@@ -290,7 +290,7 @@ W: http://www.leox.org
 
 N: TsiChung Liew
 E: Tsi-Chung.Liew@freescale.com
-D: Support for ColdFire MCF523x, MCF532x, MCF5445x
+D: Support for ColdFire MCF523x, MCF532x, MCF5445x, MCF547x_8x
 W: www.freescale.com
 
 N: Leif Lindholm

MAINTAINERS

@@ -648,9 +648,13 @@ Zachary P. Landau <zachary.landau@labxtechnologies.com>
 
 TsiChung Liew <Tsi-Chung.Liew@freescale.com>
 
+	M52277EVB		mcf5227x
 	M5235EVB		mcf52x2
 	M5329EVB		mcf532x
+	M5373EVB		mcf532x
 	M54455EVB		mcf5445x
+	M5475EVB		mcf547x_8x
+	M5485EVB		mcf547x_8x
 
 Hayden Fraser <Hayden.Fraser@freescale.com>
 

MAKEALL

@@ -644,14 +644,18 @@ LIST_coldfire="			\
 	EB+MCF-EV123		\
 	EB+MCF-EV123_internal	\
 	idmr			\
+	M52277EVB		\
 	M5235EVB		\
 	M5249EVB		\
 	M5253EVB		\
 	M5271EVB		\
 	M5272C3			\
 	M5282EVB		\
-	M5329EVB		\
+	M5329AFEE		\
+	M5373EVB		\
 	M54455EVB		\
+	M5475AFE		\
+	M5485AFE		\
 	r5200			\
 	TASREG			\
 "

Makefile

@@ -218,6 +218,7 @@ LIBS += net/libnet.a
 LIBS += disk/libdisk.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/block/libblock.a
+LIBS += drivers/dma/libdma.a
 LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
@@ -1744,6 +1745,9 @@ ZPC1900_config: unconfig
 ## Coldfire
 #########################################################################
 
+M52277EVB_config:	unconfig
+	@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
+
 M5235EVB_config \
 M5235EVB_Flash16_config \
 M5235EVB_Flash32_config:	unconfig
@@ -1816,6 +1820,16 @@ M5329BFEE_config :	unconfig
 	fi
 	@$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
 
+M5373EVB_config :	unconfig
+	@case "$@" in \
+	M5373EVB_config)	NAND=16;; \
+	esac; \
+	>include/config.h ; \
+	if [ "$${NAND}" != "0" ] ; then \
+		echo "#define NANDFLASH_SIZE	$${NAND}" > $(obj)include/config.h ; \
+	fi
+	@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
+
 M54455EVB_config \
 M54455EVB_atmel_config \
 M54455EVB_intel_config \
@@ -1848,6 +1862,76 @@ M54455EVB_i66_config :	unconfig
 	$(XECHO) "... with $${FREQ}Hz input clock"
 	@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
 
+M5475AFE_config \
+M5475BFE_config \
+M5475CFE_config \
+M5475DFE_config \
+M5475EFE_config \
+M5475FFE_config \
+M5475GFE_config :	unconfig
+	@case "$@" in \
+	M5475AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5475BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5475CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+	M5475DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+	M5475EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+	M5475FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+	M5475GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+	esac; \
+	>include/config.h ; \
+	echo "#define CFG_BUSCLK	133333333" > $(obj)include/config.h ; \
+	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
+	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
+	if [ "$${RAM1}" != "0" ] ; then \
+		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${CODE}" != "0" ] ; then \
+		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${VID}" == "1" ] ; then \
+		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${USB}" == "1" ] ; then \
+		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+	fi
+	@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
+
+M5485AFE_config \
+M5485BFE_config \
+M5485CFE_config \
+M5485DFE_config \
+M5485EFE_config \
+M5485FFE_config \
+M5485GFE_config \
+M5485HFE_config :	unconfig
+	@case "$@" in \
+	M5485AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5485BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5485CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+	M5485DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+	M5485EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+	M5485FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+	M5485GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5485HFE_config)	BOOT=2;CODE=;VID=1;USB=0;RAM=64;RAM1=0;; \
+	esac; \
+	>include/config.h ; \
+	echo "#define CFG_BUSCLK	100000000" > $(obj)include/config.h ; \
+	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
+	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
+	if [ "$${RAM1}" != "0" ] ; then \
+		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${CODE}" != "0" ] ; then \
+		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${VID}" == "1" ] ; then \
+		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${USB}" == "1" ] ; then \
+		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+	fi
+	@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
+
 #########################################################################
 ## MPC83xx Systems
 #########################################################################

README

@@ -136,8 +136,10 @@ Directory Hierarchy:
   - i386	Files specific to i386 CPUs
   - ixp		Files specific to Intel XScale IXP CPUs
   - mcf52x2	Files specific to Freescale ColdFire MCF52x2 CPUs
+  - mcf5227x	Files specific to Freescale ColdFire MCF5227x CPUs
   - mcf532x	Files specific to Freescale ColdFire MCF5329 CPUs
   - mcf5445x	Files specific to Freescale ColdFire MCF5445x CPUs
+  - mcf547x_8x	Files specific to Freescale ColdFire MCF547x_8x CPUs
   - mips	Files specific to MIPS CPUs
   - mpc5xx	Files specific to Freescale MPC5xx  CPUs
   - mpc5xxx	Files specific to Freescale MPC5xxx CPUs

board/freescale/m52277evb/Makefile

+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/freescale/m52277evb/config.mk

+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0

board/freescale/m52277evb/m52277evb.c

+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("Freescale M52277 EVB\n");
+	return 0;
+};
+
+long int initdram(int board_type)
+{
+	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
+	u32 dramsize, i;
+
+	dramsize = CFG_SDRAM_SIZE * 0x100000;
+
+	for (i = 0x13; i < 0x20; i++) {
+		if (dramsize == (1 << i))
+			break;
+	}
+	i--;
+
+	sdram->sdcs0 = (CFG_SDRAM_BASE | i);
+
+	sdram->sdcfg1 = CFG_SDRAM_CFG1;
+	sdram->sdcfg2 = CFG_SDRAM_CFG2;
+
+	/* Issue PALL */
+	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+
+	/* Issue LEMR */
+	/*sdram->sdmr = CFG_SDRAM_EMOD; */
+	sdram->sdmr = CFG_SDRAM_MODE;
+
+	udelay(1000);
+
+	/* Issue PALL */
+	sdram->sdcr = CFG_SDRAM_CTRL | 2;
+
+	/* Perform two refresh cycles */
+	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+	sdram->sdcr = CFG_SDRAM_CTRL | 4;
+
+	sdram->sdcr = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+
+	udelay(100);
+
+	return (dramsize);
+};
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("DRAM test not implemented!\n");
+
+	return (0);
+}

board/freescale/m52277evb/u-boot.lds

+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf5227x/start.o	(.text)
+    cpu/mcf5227x/libmcf5227x.a	(.text)
+    lib_m68k/libm68k.a		(.text)
+    lib_generic/libgeneric.a	(.text)
+    common/cmd_mem.o		(.text)
+    common/main.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/freescale/m5329evb/nand.c

@@ -63,10 +63,10 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
 		nand_baseaddr |= CLR_ALE;
 		break;
 	case NAND_CTL_SETWP:
-		fbcs->csmr2 |= CSMR_WP;
+		fbcs->csmr2 |= FBCS_CSMR_WP;
 		break;
 	case NAND_CTL_CLRWP:
-		fbcs->csmr2 &= ~CSMR_WP;
+		fbcs->csmr2 &= ~FBCS_CSMR_WP;
 		break;
 	}
 	this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);

board/freescale/m5373evb/Makefile

+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o mii.o nand.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/freescale/m5373evb/config.mk

+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0

board/freescale/m5373evb/m5373evb.c

+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("Freescale FireEngine 5373 EVB\n");
+	return 0;
+};
+
+long int initdram(int board_type)
+{
+	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+	u32 dramsize, i;
+
+	dramsize = CFG_SDRAM_SIZE * 0x100000;
+
+	for (i = 0x13; i < 0x20; i++) {
+		if (dramsize == (1 << i))
+			break;
+	}
+	i--;
+
+	sdram->cs0 = (CFG_SDRAM_BASE | i);
+	sdram->cfg1 = CFG_SDRAM_CFG1;
+	sdram->cfg2 = CFG_SDRAM_CFG2;
+
+	/* Issue PALL */
+	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+
+	/* Issue LEMR */
+	sdram->mode = CFG_SDRAM_EMOD;
+	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+
+	udelay(500);
+
+	/* Issue PALL */
+	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+
+	/* Perform two refresh cycles */
+	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+
+	sdram->mode = CFG_SDRAM_MODE;
+
+	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+
+	udelay(100);
+
+	return dramsize;
+};
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("DRAM test not implemented!\n");
+
+	return (0);
+}

board/freescale/m5373evb/mii.c

+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fec.h>
+#include <asm/immap.h>
+
+#include <config.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	if (setclear) {
+		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
+		gpio->par_feci2c |=
+		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
+	} else {
+		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
+	}
+	return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970		0x78100000	/* LXT970 */
+#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
+#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
+#define PHY_ID_QS6612		0x01814400	/* QS6612 */
+#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
+#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
+#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
+#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
+#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
+
+#define STR_ID_LXT970		"LXT970"
+#define STR_ID_LXT971		"LXT971"
+#define STR_ID_82555		"Intel82555"
+#define STR_ID_QS6612		"QS6612"
+#define STR_ID_AMD79C784	"AMD79C784"
+#define STR_ID_LSI80225		"LSI80225"
+#define STR_ID_LSI80225B	"LSI80225/B"
+#define STR_ID_DP83848VV	"N83848"
+#define STR_ID_DP83849		"N83849"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_s *info)
+{
+	volatile fec_t *fecp = (fec_t *) (info->miibase);
+	int i;
+
+	fecp->ecr = FEC_ECR_RESET;
+	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+		udelay(1);
+	}
+	if (i == FEC_RESET_DELAY) {
+		printf("FEC_RESET_DELAY timeout\n");
+	}
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+	struct fec_info_s *info;
+	struct eth_device *dev;
+	volatile fec_t *ep;
+	uint mii_reply;
+	int j = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	ep = (fec_t *) info->miibase;
+
+	ep->mmfr = mii_cmd;	/* command to phy */
+
+	/* wait for mii complete */
+	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+		udelay(1);
+		j++;
+	}
+	if (j >= MCFFEC_TOUT_LOOP) {
+		printf("MII not complete\n");
+		return -1;
+	}
+
+	mii_reply = ep->mmfr;	/* result from phy */
+	ep->eir = FEC_EIR_MII;	/* clear MII complete */
+#ifdef ET_DEBUG
+	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+	return (mii_reply & 0xffff);	/* data read from phy */
+}
+#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+	struct fec_info_s *info = dev->priv;
+	int phyaddr, pass;
+	uint phyno, phytype;
+
+	if (info->phyname_init)
+		return info->phy_addr;
+
+	phyaddr = -1;		/* didn't find a PHY yet */
+	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+		if (pass > 1) {
+			/* PHY may need more time to recover from reset.
+			 * The LXT970 needs 50ms typical, no maximum is
+			 * specified, so wait 10ms before try again.
+			 * With 11 passes this gives it 100ms to wake up.
+			 */
+			udelay(10000);	/* wait 10ms */
+		}
+
+		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+
+			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+			printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+			if (phytype != 0xffff) {
+				phyaddr = phyno;
+				phytype <<= 16;
+				phytype |=
+				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_DP83848VV:
+					strcpy(info->phy_name,
+					       STR_ID_DP83848VV);
+					info->phyname_init = 1;
+					break;
+				default:
+					strcpy(info->phy_name, "unknown");
+					info->phyname_init = 1;
+					break;
+				}
+
+#ifdef ET_DEBUG
+				printf("PHY @ 0x%x pass %d type ", phyno, pass);
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_DP83848VV:
+					printf(STR_ID_DP83848VV);
+					break;
+				default:
+					printf("0x%08x\n", phytype);
+					break;
+				}
+#endif
+			}
+		}
+	}
+	if (phyaddr < 0)
+		printf("No PHY device found.\n");
+
+	return phyaddr;
+}
+#endif				/* CFG_DISCOVER_PHY */
+
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
+
+void __mii_init(void)
+{
+	volatile fec_t *fecp;
+	struct fec_info_s *info;
+	struct eth_device *dev;
+	int miispd = 0, i = 0;
+	u16 autoneg = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	fecp = (fec_t *) info->miibase;
+
+	fecpin_setclear(dev, 1);
+
+	mii_reset(info);
+
+	/* We use strictly polling mode only */
+	fecp->eimr = 0;
+
+	/* Clear any pending interrupt */
+	fecp->eir = 0xffffffff;
+
+	/* Set MII speed */
+	miispd = (gd->bus_clk / 1000000) / 5;
+	fecp->mscr = miispd << 1;
+
+	info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+	while (i < MCFFEC_TOUT_LOOP) {
+		autoneg = 0;
+		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+		i++;
+
+		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+			break;
+
+		udelay(500);
+	}
+	if (i >= MCFFEC_TOUT_LOOP) {
+		printf("Auto Negotiation not complete\n");
+	}
+
+	/* adapt to the half/full speed settings */
+	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ *	  no PHY connected...
+ *	  For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ *	  Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+		       unsigned short *value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+	rdreg = mii_send(mk_mii_read(addr, reg));
+
+	*value = rdreg;
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", *value);
+#endif
+
+	return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+			unsigned short value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+	rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", value);
+#endif
+
+	return 0;
+}
+
+#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */

board/freescale/m5373evb/nand.c

+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NAND)
+#include <nand.h>
+#include <linux/mtd/mtd.h>
+
+#define SET_CLE		0x10
+#define CLR_CLE		~SET_CLE
+#define SET_ALE		0x08
+#define CLR_ALE		~SET_ALE
+
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+	struct nand_chip *this = mtdinfo->priv;
+	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+	u32 nand_baseaddr = (u32) this->IO_ADDR_W;
+
+	switch (cmd) {
+	case NAND_CTL_SETNCE:
+	case NAND_CTL_CLRNCE:
+		break;
+	case NAND_CTL_SETCLE:
+		nand_baseaddr |= SET_CLE;
+		break;
+	case NAND_CTL_CLRCLE:
+		nand_baseaddr &= CLR_CLE;
+		break;
+	case NAND_CTL_SETALE:
+		nand_baseaddr |= SET_ALE;
+		break;
+	case NAND_CTL_CLRALE:
+		nand_baseaddr |= CLR_ALE;
+		break;
+	case NAND_CTL_SETWP:
+		fbcs->csmr2 |= FBCS_CSMR_WP;
+		break;
+	case NAND_CTL_CLRWP:
+		fbcs->csmr2 &= ~FBCS_CSMR_WP;
+		break;
+	}
+	this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
+}
+
+static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
+{
+	struct nand_chip *this = mtdinfo->priv;
+	*((volatile u8 *)(this->IO_ADDR_W)) = byte;
+}
+
+static u8 nand_read_byte(struct mtd_info *mtdinfo)
+{
+	struct nand_chip *this = mtdinfo->priv;
+	return (u8) (*((volatile u8 *)this->IO_ADDR_R));
+}
+
+static int nand_dev_ready(struct mtd_info *mtdinfo)
+{
+	return 1;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	*((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
+
+	/* set up pin configuration */
+	gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
+	gpio->pddr_timer |= 0x08;
+	gpio->ppd_timer |= 0x08;
+	gpio->pclrr_timer = 0;
+	gpio->podr_timer = 0;
+
+	nand->chip_delay = 50;
+	nand->eccmode = NAND_ECC_SOFT;
+	nand->hwcontrol = nand_hwcontrol;
+	nand->read_byte = nand_read_byte;
+	nand->write_byte = nand_write_byte;
+	nand->dev_ready = nand_dev_ready;
+
+	return 0;
+}
+#endif

board/freescale/m5373evb/u-boot.lds

+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf532x/start.o		(.text)
+    lib_m68k/traps.o		(.text)
+    lib_m68k/interrupts.o	(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/freescale/m547xevb/Makefile

+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o mii.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/freescale/m547xevb/config.mk

+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFF800000

board/freescale/m547xevb/m547xevb.c

+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <pci.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("Freescale FireEngine 5475 EVB\n");
+	return 0;
+};
+
+long int initdram(int board_type)
+{
+	volatile siu_t *siu = (siu_t *) (MMAP_SIU);
+	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+	u32 dramsize, i;
+
+	siu->drv = CFG_SDRAM_DRVSTRENGTH;
+
+	dramsize = CFG_DRAMSZ * 0x100000;
+	for (i = 0x13; i < 0x20; i++) {
+		if (dramsize == (1 << i))
+			break;
+	}
+	i--;
+	siu->cs0cfg = (CFG_SDRAM_BASE | i);
+
+#ifdef CFG_DRAMSZ1
+	temp = CFG_DRAMSZ1 * 0x100000;
+	for (i = 0x13; i < 0x20; i++) {
+		if (temp == (1 << i))
+			break;
+	}
+	i--;
+	dramsize += temp;
+	siu->cs1cfg = ((CFG_SDRAM_BASE + temp) | i);
+#endif
+
+	sdram->cfg1 = CFG_SDRAM_CFG1;
+	sdram->cfg2 = CFG_SDRAM_CFG2;
+
+	/* Issue PALL */
+	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+
+	/* Issue LEMR */
+	sdram->mode = CFG_SDRAM_EMOD;
+	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+
+	udelay(500);
+
+	/* Issue PALL */
+	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+
+	/* Perform two refresh cycles */
+	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+
+	sdram->mode = CFG_SDRAM_MODE;
+
+	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+
+	udelay(100);
+
+	return dramsize;
+};
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("DRAM test not implemented!\n");
+
+	return (0);
+}
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI devices, report devices found.
+ */
+static struct pci_controller hose;
+extern void pci_mcf547x_8x_init(struct pci_controller *hose);
+
+void pci_init_board(void)
+{
+	pci_mcf547x_8x_init(&hose);
+}
+#endif				/* CONFIG_PCI */

board/freescale/m547xevb/mii.c

+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <net.h>
+
+#include <asm/immap.h>
+#include <asm/fec.h>
+#include <asm/fsl_mcdmafec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
+
+	if (setclear) {
+		if (info->iobase == CFG_FEC0_IOBASE)
+			gpio->par_feci2cirq |= 0xF000;
+		else
+			gpio->par_feci2cirq |= 0x0FC0;
+	} else {
+		if (info->iobase == CFG_FEC0_IOBASE)
+			gpio->par_feci2cirq &= 0x0FFF;
+		else
+			gpio->par_feci2cirq &= 0xF03F;
+	}
+	return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970		0x78100000	/* LXT970 */
+#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
+#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
+#define PHY_ID_QS6612		0x01814400	/* QS6612 */
+#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
+#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
+#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
+#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
+#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
+#define PHY_ID_BCM5222		0x00406322	/* Broadcom 5222 */
+
+#define STR_ID_LXT970		"LXT970"
+#define STR_ID_LXT971		"LXT971"
+#define STR_ID_82555		"Intel82555"
+#define STR_ID_QS6612		"QS6612"
+#define STR_ID_AMD79C784	"AMD79C784"
+#define STR_ID_LSI80225		"LSI80225"
+#define STR_ID_LSI80225B	"LSI80225/B"
+#define STR_ID_DP83848VV	"N83848"
+#define STR_ID_DP83849		"N83849"
+#define STR_ID_BCM5222		"BCM5222"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_dma *info)
+{
+	volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
+	int i;
+
+	fecp->ecr = FEC_ECR_RESET;
+	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+		udelay(1);
+	}
+	if (i == FEC_RESET_DELAY) {
+		printf("FEC_RESET_DELAY timeout\n");
+	}
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+	struct fec_info_dma *info;
+	struct eth_device *dev;
+	volatile fecdma_t *ep;
+	uint mii_reply;
+	int j = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	ep = (fecdma_t *) info->miibase;
+
+	ep->mmfr = mii_cmd;	/* command to phy */
+
+	/* wait for mii complete */
+	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+		udelay(1);
+		j++;
+	}
+	if (j >= MCFFEC_TOUT_LOOP) {
+		printf("MII not complete\n");
+		return -1;
+	}
+
+	mii_reply = ep->mmfr;	/* result from phy */
+	ep->eir = FEC_EIR_MII;	/* clear MII complete */
+#ifdef ET_DEBUG
+	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+	return (mii_reply & 0xffff);	/* data read from phy */
+}
+#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+	struct fec_info_dma *info = dev->priv;
+	int phyaddr, pass, temp;
+	uint phyno, phytype;
+
+	if (info->phyname_init) {
+		return info->phy_addr;
+	}
+
+	phyaddr = -1;		/* didn't find a PHY yet */
+	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+		if (pass > 1) {
+			/* PHY may need more time to recover from reset.
+			 * The LXT970 needs 50ms typical, no maximum is
+			 * specified, so wait 10ms before try again.
+			 * With 11 passes this gives it 100ms to wake up.
+			 */
+			udelay(10000);	/* wait 10ms */
+		}
+
+		temp = 0;
+		if (info->index > 0) {
+			/* Some phy have multiple address, to solve the issue
+			   where phyno keeps starting from 0, check the
+			   previous phy address if both miibase are the same. */
+			if (info->miibase == (info->next)->miibase) {
+				temp = (info->next)->phy_addr + 1;
+			}
+		}
+
+		for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
+
+			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+			printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+			if (phytype != 0xffff) {
+				phyaddr = phyno;
+				phytype <<= 16;
+				phytype |=
+				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_BCM5222:
+					strcpy(info->phy_name, STR_ID_BCM5222);
+					info->phyname_init = 1;
+					break;
+				default:
+					strcpy(info->phy_name, "unknown");
+					info->phyname_init = 1;
+					break;
+				}
+
+#ifdef ET_DEBUG
+				printf("PHY @ 0x%x pass %d type ", phyno, pass);
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_BCM5222:
+					printf(STR_ID_BCM5222);
+					break;
+				default:
+					printf("0x%08x\n", phytype);
+					break;
+				}
+#endif
+			}
+		}
+	}
+	if (phyaddr < 0)
+		printf("No PHY device found.\n");
+
+	return phyaddr;
+}
+#endif				/* CFG_DISCOVER_PHY */
+
+void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
+
+void __mii_init(void)
+{
+	volatile fecdma_t *fecp;
+	struct fec_info_dma *info;
+	struct eth_device *dev;
+	int miispd = 0, i = 0;
+	u16 autoneg = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	fecp = (fecdma_t *) info->miibase;
+
+	fecpin_setclear(dev, 1);
+
+	mii_reset(info);
+
+	/* We use strictly polling mode only */
+	fecp->eimr = 0;
+
+	/* Clear any pending interrupt */
+	fecp->eir = 0xffffffff;
+
+	/* Set MII speed */
+	miispd = (gd->bus_clk / 1000000) / 5;
+	fecp->mscr = miispd << 1;
+
+	info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+	while (i < MCFFEC_TOUT_LOOP) {
+		autoneg = 0;
+		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+		i++;
+
+		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+			break;
+
+		udelay(500);
+	}
+	if (i >= MCFFEC_TOUT_LOOP) {
+		printf("Auto Negotiation not complete\n");
+	}
+
+	/* adapt to the half/full speed settings */
+	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ *	  no PHY connected...
+ *	  For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ *	  Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+		       unsigned short *value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+	rdreg = mii_send(mk_mii_read(addr, reg));
+
+	*value = rdreg;
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", *value);
+#endif
+
+	return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+			unsigned short value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+	rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", value);
+#endif
+
+	return 0;
+}
+
+#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */